![ArmSoar](/img/default-banner.jpg)
- Видео 119
- Просмотров 720 971
ArmSoar
Добавлен 2 окт 2010
RC soaring is a big part of our lives, and we'd like to share that passion with you.
We also produce some of the most competitive and easy-to-build high-performance RC gliders on the market today, go check it out!
Check out my Ultimate Tool Guide for getting started in RC soaring: www.armsoar.com/pages/what-tools-do-i-need
We also produce some of the most competitive and easy-to-build high-performance RC gliders on the market today, go check it out!
Check out my Ultimate Tool Guide for getting started in RC soaring: www.armsoar.com/pages/what-tools-do-i-need
Phantom Balsa F5K eDLG Kit 1.5 Meter Electric RC Glider Build Log
This is the build instructions (no voiceover) for our Phantom Almost-Ready-to-Fly (ARF) 1.5-meter RC electric glider. The Phantom is not just great for fun flying in small flying fields but as an entry into the F5K or eDLG competition classes and events.
The Phantom is a balsa built-up glider with a carbon boom, carbon spar and other reinforcements and is covered with a light plastic film. This is a 6-servo glider, which means it has Rudder, Elevator, Flap, and Aileron channels for control. The V-tails are controlled by a pull-string system with a spring in the control surface.
As the Phantom ARF comes mostly assembled, it usually takes 2-3 hours to put together at home.
ArmSoar: www.armsoar...
The Phantom is a balsa built-up glider with a carbon boom, carbon spar and other reinforcements and is covered with a light plastic film. This is a 6-servo glider, which means it has Rudder, Elevator, Flap, and Aileron channels for control. The V-tails are controlled by a pull-string system with a spring in the control surface.
As the Phantom ARF comes mostly assembled, it usually takes 2-3 hours to put together at home.
ArmSoar: www.armsoar...
Просмотров: 23 023
Видео
FrSky Twin X Lite and Twin Lite Pro Module
Просмотров 10 тыс.Год назад
Let's check out FrSky's new Twin protocol, the Twin X Lite, and the Twin Lite Pro RF module! We'll take a look at how it compares to the X Lite Pro, and how it fares for a glider or DLG pilot. FrSky Twin X Lite S: bit.ly/3ZwKVZV FrSky Twin Lite Pro module: bit.ly/3WpO4bO Store: www.armsoar.com KST: KST X06 v6 Servo: bit.ly/kstx06v6 KST X08 v6 Servo: bit.ly/kstx08v6 KST A08 v6 Servo: bit.ly/ksta...
E-Medina ARF 2 Meter Electric RC F5-RES Glider Build Log
Просмотров 14 тыс.Год назад
This is the build instructions (no voiceover) for our E-Medina Almost-Ready-to-Fly (ARF) 2-meter RC electric glider. We are assembling the F5-RES/F5L version of the E-Medina, launched with an electric motor. The F3-RES/F3L version of the Medina is launched with a bungee, and the assembly video for the Medina can be found here: ruclips.net/video/kdrv0LtNDms/видео.html. The E-Medina is a balsa bu...
Medina ARF 2 Meter RC F3-RES Glider Build Log
Просмотров 31 тыс.Год назад
This is the build instructions (no voiceover) of our Medina Almost-Ready-to-Fly (ARF) 2-meter RC glider. We are assembling the F3-RES/F3L version of the Medina, launched with a bungee. The F5-RES/F5L version of the Medina is launched with an electric motor. The build log for the E-Medina can be found here: ruclips.net/video/z60wb7_5ubQ/видео.html. The Medina is a balsa built-up glider with a ca...
Medina, our new 2M ARF RC glider for F3L/F3-RES and F5-RES
Просмотров 15 тыс.2 года назад
Medina, our new 2M ARF RC glider for F3L/F3-RES and F5-RES
DLG & ArmSoar Q&A 001 - Exercises for higher launches, Setting up Zoom mode, and more
Просмотров 3 тыс.2 года назад
DLG & ArmSoar Q&A 001 - Exercises for higher launches, Setting up Zoom mode, and more
RadioMaster Zorro Unboxing & First Impressions
Просмотров 4,5 тыс.2 года назад
RadioMaster Zorro Unboxing & First Impressions
RC Glider Basics | Pull-String Tail Linkage
Просмотров 13 тыс.2 года назад
RC Glider Basics | Pull-String Tail Linkage
Finally A Soft Sunny Autumn Day To Fly My BAMF 2
Просмотров 6 тыс.2 года назад
Finally A Soft Sunny Autumn Day To Fly My BAMF 2
Camber Up Ep. 6 with Gavin Trussell - Stream Team Fire, US F3K Team Selects, Mixed-Launch Contests
Просмотров 1,1 тыс.2 года назад
Camber Up Ep. 6 with Gavin Trussell - Stream Team Fire, US F3K Team Selects, Mixed-Launch Contests
Trying New Settings For Super Light Lift With The Deviant 1M DLG
Просмотров 8 тыс.2 года назад
Trying New Settings For Super Light Lift With The Deviant 1M DLG
10 Minute Flight On A One Meter DLG?
Просмотров 16 тыс.2 года назад
10 Minute Flight On A One Meter DLG?
Flying In Turbulence With The BAMF2
Просмотров 3,2 тыс.2 года назад
Flying In Turbulence With The BAMF2
Choppy Air With The Deviant + Initial Thoughts On The FrSky X20
Просмотров 4,6 тыс.2 года назад
Choppy Air With The Deviant Initial Thoughts On The FrSky X20
Camber Up Ep. 5 with Toby Herrera - Launching to 100m, F3K World Champs, F5J Thoughts & Planes
Просмотров 1,5 тыс.2 года назад
Camber Up Ep. 5 with Toby Herrera - Launching to 100m, F3K World Champs, F5J Thoughts & Planes
Flying My RC Glider Right Outside My Back Door
Просмотров 2,4 тыс.2 года назад
Flying My RC Glider Right Outside My Back Door
Unboxing the Carbon Mini Dart 2 and the new 2-Piece Wing Kite DLG/F3K Gliders
Просмотров 6 тыс.2 года назад
Unboxing the Carbon Mini Dart 2 and the new 2-Piece Wing Kite DLG/F3K Gliders
Quick Turnaround Practice With The BAMF 2
Просмотров 5 тыс.3 года назад
Quick Turnaround Practice With The BAMF 2
Trimming the BAMF 2 DLG and Chasing Thermals
Просмотров 10 тыс.3 года назад
Trimming the BAMF 2 DLG and Chasing Thermals
I appreciate these videos as a new guy to DLG.
Glad they’re helpful!!
Isn't this too heavy for DLG? I want to buy new transmitter and I look for tandem 18s or twin 14s. Not surw what to pick
I do prefer the lighter radios for DLG. You can’t go wrong with the 18s or 14s, although i prefer the screen on the top, so I am using the 18s.
How.do you do the cancel zoom with elevator stick
Is the output adjusttable on the x20 pro like the.module or the module on the pro would still be a tw upgrade? My buddy has one on his
Hello kan jou make a demonstraties for active the motor brake type 1207 armsoar , thee say via BL heli ?
Then you could use less expensive building materials like GFK instead of CFK. Then the plane must get other wings instead of more wight. It will not get in my mind
That will lead to a plane with weights spread across the wingspan, reducing launch height, agility, and thermal sensitivity.
Great video for a newbie. Thanks.
Hey I have a question. I want to put a ar410 receiver from spektrum in my kite dlg. Am I going to have problems with the signal if there is no antenna ?
No, the AR410 with the built-in antennas is a solid receiver.
which receiver are you using with spektrum in a dlg?
AR410
You could just wrap it around the stick and the handle and not void your warranty
I wish you guys took paypal
Send us an email at info@armsoar.com - we can take PayPal on manual orders :)
Stupid question maybe: I am used to plugging the battery into the ESC and the ESC into the receiver. Obviously, a glider does not need an ESC. I understand that I need a 1S Lipo to power the receiver and the servos. However, where/how on the receiver do I plug the battery? Do the 1S batteries come with a plug for the three pins in the receiver?
Can anyone suggest a budget DLG model?
Is the template still available? the link doesn't work anymore.
How can I setup the motor breake on this?
Двухрежимный старт. Я тоже себе такой настроил
Beautiful planes! having built 2 F3-RES planes I can attest to the fact that the builds can take a long time and an ARF plane is a very clever idea if you can make it work as a business case. I hope sales are going well!
Great, though those servos just shoot up the price of this; in my opinion nothing wrong with some emac servos in a glider like this.
Works of art! I would be afraid to fly them, because I could never afford to replace them!!
Nice flight
What FUTABA Rx are you using for 1S Lipo? R3004SB needs 4.8~7.4V in spec sheet. I don't know slim FUTABA Rx for 1S.
I use several Futaba receivers that work fine on 1S. It’s the servos that need a certain voltage to operate optimally.
really enjoy these videos, I have learned a lot of useful information. can't really say Id buy any armsoor products, in my opinion they have priced themselves out of a lot of business, I have seen their products up close and they are very high quality , as a composite specialist I know what that takes to produce that kind of quality . I also know what the basic products cost and I can say with absolute certainty its not as high as you might think
I been looking at getting into DLG's and im a current RC pilot and would like to buy a decent quality glider, I been dumbfounded at the prices..... ArmSoar is ridiculously priced
Roy Kent! :D
p5b是不是只有我们中国在玩?
我还在等我的bamf2到中国
What kind of alcohol are you using?
Conratulation! I deal with F3K category too in Mini one meter size but only two Channel. The Best Time on a training flight was over 27 minute. Awesome what these mini DLGs are able tó produce!❤❤❤
Helpful. I have a Mini Elipse I have been flying for many years now and have a similar setup for cruise, thermal and penetration through cold air or when heading over to less sinky air. I have a potentiometer set to control the flap settings to positive or negative for fine tuning and use the idle-up switch (heli) for quick flap or flaperon settings. And like you brakes via the throttle. I have also used coupled elevator to flap for tightening turns when doing aerobatics. And coupled rudder to aileron paired to differential aileron/flaperon.
Preise wie aus Gold! Baue so weiter selber + 10× günstiger!! Bruno CH
Excellent video! You answered all of my questions. Thanks!
Glad it was helpful!
Hi Thomas, thank you for this video. helpful on concepts. I download the template file and copied it to my X18S NAND /models folder. Somehow that corrupted the file system. I deleted the file, renamed the template file to 7 character filename. When I try to select it as the model to load, Ethos shows "invalid Data" would never load the template settings. I used Ethos Suite to reset the X18s to factory default. Any ideas on what maybe the cause? My Tx Ethos is now at version 1.5.4, Ethos suite shows all up to date.
Unfortunately, I think there is a major change between 1.4 and 1.5 that made reading our templates an issue :(
Thank you for responding. The issue is the template is unusable under current Ethos 1.5.4. Can your team upgrade a 1.4 Ethos Tx with your template on it to ver 1.5 to see if Ethos suite will upgrade the Template / model to 1.5 status and functional. If successful, please upload the updated template here. If not, perhaps escalation to the fine team at FrSky can fix this incompatibility (no workaround) within their own software. I like the logic and layout of your template. There is another DLG template out there that will work with 1.5. However, its logic and layout is like OTX, hard to manage and maintain over time. Hope your team can perform the upgrade test validation to get us going. Again, many thanks.
Very helpful explanations! I would love to see a Radio Setup Video for EdgeTX (I'm now running the Radiomaster TX16S) but I only found the Spektrum Setup Video in your channel, did I miss it? I'm kind of figuring it out by myself, but it would be helpful to see how others set up their DLG on EdgeTX / OpenTX
Glad the video was helpful! We don’t have an EdgeTX or OpenTX video, sorry!
@@ArmSoar no worries, maybe something for the future 😄 glad to see you still active on YT, i also really liked the podcast format and a lot of your other videos to get started into the hobby 🙏
Never more than 40-45
Great Video. I am using the NX10 and would like to swap the A switch and the Bind button as you did. Is this possible on the NX10 ? I fear the case holes are not the same size. Thanks
Can someone confirm the CG point- I read 69-70mm from leading edge, but on my first day of flying it seemed a bit tail heavy. 70mm puts it way behind the thickest chord section, and I feel like most of my planes had their CG just forward of that point. Just getting back into building planes, and really enjoyed seeing it fly today, despite the gusty conditions. Thanks for any input.
Will the templates work in the X18S?
hola me encantan, hacen envios a chile? saludos
Just wondering what Frsky Rx you recommend now that GRx6 is no longer available? Seems not much space behind servos.
Archer GR6 or R6, or if running Twin, then Twin GR6 or R6.
Amazing craftsmanship... Dlgs are expensive.. But after spending many years now scratch building dlgs and gliders, Im still amazed at the level of finish of these models.. It takes a lot of time to make one.. Its no walk in the park.. I could never finish a model to this high of a standard even though I can hotwire wings, bag wings and tails, even make my own booms and pods.. They just simply are second fiddle to this craftsmanship..
Thank you for such kind words!! We work really hard to get our product to this level of quality:)
Any in stock?
Send is an email: info@armsoar.com :)
What about using an 18650 battery?
Best thing about evening flights is the lift is weak but so is the sink. I learned to not bother turning tight or trying to core anything in the evenings.. I just use a wide circle thats butter smooth as I can be with minimal control input and fly half in and half out of the lift.. If im flying at minimum sink, and gains outweigh the losses.. Just so long as I dont get peppy and try to turn harder, Half in half out technique.. Lol...
Hard to believe there room for a battery and receiver I wish you would of show it completed
It will fit an ArmSoar 1S 350 mAh LiPo + receiver. Common receivers used in the Deviant is the FrSky Archer GR6, Twin GR6, and Spektrum AR410 (uncased).
61m
Nobody's notices the sun sitting in the middle id the sky. Suns smaller and local and not. Ball of gas( burning in a vacuum duh no oxygen?,). Earths flat and enclosed
everyone notices your insane.
when will more of this model be available? I would like to purchase one
Please send us an email: info@armsoar.com, thanks!!
Does this come as pnp instead of arf? Can i put my OWN reciver in it? Do i need a new transmitter? I dont have any other than dsmx-compatible. Thanks.
@AnonymousFlight9600 Yup! We have PNP (we call it receiver-ready/RR in our store) options :) You can add your own receiver to it. Send us an email: info@armsoar.com!
When you started to climb and said, "The thermal was a bit more in front," it kept bumping your right wing tip, and you kept making left turns, staying on the outer edge of the thermal... remember to turn into the thermal, in that case right turns. Always try to find the core of the thermal. Nice video, thank you for sharing.
I think he knows what hes doing..lol
@@petrokemikalmaybe, but he didn't turn into the thermal in the video. lol
U realise your trying to tell a competition DLG pilot how to thermal ? Seriously !!!@@enriquebruzual1702
Link for the color gapseal is broken.
Price?