Видео

Try a test on some SK ammo. I have 2 rpr's and a vudoo that LOVE it

Try it in 17wsm

Something you said hit a nerve. No such thing as too much scope for an accurate .22 Reason being most 22 scopes aren't worth a crap, the reticle/crosshair is usually thicker than what you are aiming at. People shoot their 22's way more than anything else because the ammo is affordable. Seeing a Tikka or CZ with giant scopes takes you back at first till you have one.

NOT CROCKS!!!!!!? 🤣

i hope its time to do that again but put a barrel tuner on it and tune each round , then show the comparison. i was able to shrink my moa by 50% with a tuner . but i dont know which ammo would do best if tuned properly. you probably dont need most of the obscure brands but the 10 most popular brands . not sure about every type from each manufacturer that would take a long time and alot of money! but anything you can do especially for less expensive ammo! can we call the rpr a good rifle to compete against the fancy expensive rifles just by adding a tuner?

Stop making excuses for design flaws in the barrel manufacturing process.

Nice 👍🏼 🎯 💯 🔥 💨

Does no one read the owners manual? It specifically says not to shoot Stingers. The casing is longer than other .22lr and can get stuck in the chamber.

What rifles and manufacture in any caliper can shoot a group of .20 and .10 at 50 and 100 yards. Is there a .22LR rifle that can shoot a group of .10?

Learned a lot from this video. Thanks

What magwell?

Nice

Apakah saya bisa membeli amunisi 22Lr dari anda?

This video makes me feel really good about my stock RPR, with cci SV my groups look very similar to yours with the shaw barrel!

Did you say 11 pounds 5 ounces trigger pull??

I'm wanting one. I have a Ruger Long-Range Rimfire Target (apparently kinda rare) and feel it needs 'company' in the safe.

My RPR likes Eley ammo best, CCI Blazer was surprising but not match quality.

Any advantage with the steel barrel compared to the carbon ? I shoot lefty also. any advice would be appreciated

Ordered mine here in the UK yesterday, should have it by Wednesday

I’ve got the same rifle with the KRG Bravo stock and Leupold 4.5x14 LRT glass. You don’t mention anything about it in your video so I’m kind of guessing that you may not have experimented with torque settings for the action screws. The instructions that came with the stock specify 65 inch pounds but I’m almost positive that’s if the stock is being used with the Tika T3X Rifles. I started with 20 inch pounds, fired (5) five round groups at 5 inch pound increments up to 65 inch pounds and the sweet spot on my rifle is 40 inch pounds. With that torque setting and Eley 40gr Match I’m consistently getting 1 to 1.25 minutes at 50 yards (that’s with an AAC Aviator can).

Which is more accurate between the carbon and the steel barreled ? 🤔

Okay so here is my question for can you put this on a standard AR-15 lower I have a multi-cal PSA lower it’s the whole reason why I bought it yes the A2 stock sucks even with the pad on it so besides having to get a new stock do I have to buy a new lower as well or can it fit on my current lower?

Appreciate it!

Should’ve got the magnum!! Lots of info. Thanks!

22lr is harder to find in my area anything is good for me. 🤘 very cool most common thing I find is a brand “fiocchi”

I own 10 CZs and never had one shoot that bad. That’s why I own so many.

Corey - I have the opportunity to get this rifle with a $220 vortex optic and Magpul bipod for about $900 after tax and FFL. Yay, or nay? I’ve been after one of these rifle but they haven’t been produced in quite sometime.

I have several CZ and they all shoot great. Those are probably the worst groups I’ve seen out of a CZ. Have you tried again maybe after you got used to the gun? Mine all do really well with subsonic ammo. I use RWS subsonic and CCI Subsonics mostly.

Aquila was always hit and miss with whatever I tried it in. It would shoot really tight groups but would throw fliers every 10 rounds or so. Every box, every batch, every gun. I don't know what the issue was but they always did it. They burn dirty too, lots more fouling and unburnt powder. Which is no big deal if they shot well. I want to love them but they just don't have the consistency down.

This thing looks🔥 nice vid bro👌 my only question is what brand light is that on the side? Thanks for the video

Have exact set up for both rifles. I agree with the Shaw on the RPR. The stock barrel is fine. But for the 10/22 I love that Shaw. Also have a Kidd 18” fluted SS that I think is a touch more accurate but idk

You would of impressed me it you were doing this at a 100 yards ...Your right your accessory can very from one manufacturer to another ..

Miss the 22lr content, That being said, If you buy another suppressor, Maybe lean towards a .30 Cal Multi caliber as a dedicated 22lr can. I know, I hear it now… but in my experience, after shooting rental 22lr dedicated cans for years at the range, with only fair results, I finally settled on a Griffin Optimus 9. I only run it on our CZ 457s and B14r. There’s basically no difference in sound, My Optimus comes with a .22 Cal end cap. Dead quiet with Subs, No impact shifts, and for whatever reason, my 16.5” HB 457s with the Optimus shoots SK Match .200-240 groups consistently with the on and off .160s Just a tip. I think the larger baffles help?

Thanks for the videos. Having watched quite a few CZ 457 Varmint + ammo videos on RUclips, I can only conclude that your test results (and with that, your rifle) are an exception to the rule and most probably not indicative of the precision & accuracy of the CZ 457 as a whole.

I know this is a 4 year old video but wanted to chime in. A few guys in our town (very small) started putting rimfire shoots. I thought it would be fun, which it is but I got to watch that I don't go down a rabbit hole with it lol. I have a habit of spiraling out of control with projects. Anyways, I watched a bunch of reviews on 22 rimfires. I didn't have a lot of money to spend so I settled on a Savage Mark II. 275 bucks out the door. 16inch bull barrel. It will shoot sub moa groups all day with SK match and SK Long Range. But sub moa isn't quite good enough. It may do better with some 35 dollar a box ammo but I'm not paying that much. So I came across a Ruger Precision. If I didn't get such a good deal and was easy to get my money back out of it I would of been extremely ticked. It isn't half the gun that the Savage is. Not no where near as accurate and had a lot of issues with failure to feed and eject. So I sold it and ordered the cheapest CZ457 I could find. It's an American suppressor ready with black nylon stock model for $530 It isn't pretty but man it can shoot. It took about 3 boxes of shells for it to start breaking in. By the 4th box it was shooting one hole groups. One group was incredibly small at .285 inches. That's 5 shots at 50 yards. I also shot two flys that were walking around on the target. Best part is that it was the cheaper SK Standard plus ammo. The only issue I've had is failure to fully eject. I gave the bolt a good cleaning and lubricating but haven't had the chance to take it back out to try it. Hopefully that issue will go away. It's also the pencil thin threaded barrel. I figured it would heat up quick and start shooting all over the place but it never really got hot. So I'm hoping I can be a little more competitive since the barrel will drop me down in the standard class from the outlaw class. I can't justify several thousand dollar rifles to enter a competition where you might win 10 bucks a round.

Great video man ! Do you still own this rifle ? Have you tried Norma Tac22 ammo ? Thanks for sharing

I also own a CZ 457 and it is funny to see that my cheap Savage B22 shots better with cci standard. I have to make more tests thanks for the video it is great you are presenting the truth of these rifles.

457 varmint and pro iirc are the only ones with bull barrels the other models have thin barrels

Is 1/2 @50 yards = 1/2 moa or 1 moa? I was under the impression that moa is measured at 100yards?

Damn big boy 7.0 shafts

Got 3 back this week, bought one last Tuesday, one on Wednesday, (Thursday was the 4th and everything was closed), bought one on Friday. Approval emails came back 2 on Tuesday and 1 today (Wednesday afternoon). Get them while you can. I have waited 9 months multiple times previously before this speed up in approvals. No excuses.

So your complaint is about an aftermarket trigger? That has nothing to do with the gun. That’s no psa’s fault bud

Interesting video, thanks for posting it.

Is this at 50 or 100?

BCA isn’t an upgrade. Jk I shot sub moa at 100 with a bca 16” heavy Federal fusion 120 grain

I tried about 25 different types out of my 457. I must admit I was hoping for better also but my results weren't quite so bad. I imagine you sold it by now.

America has never been great.MAGA Make America Germany Again

Didn't notice... but were Armscor 22LR ammo available for testing? Standard, subsonic, or HV?

I know this is an old post now so don't know if anyone has commented on it but the "flyers" you are getting - other than if it was a cold bore shot, is probably due to change of bullet lube. If you go from a parafin wax type to an oil based type you might want a round or three befoe it settles back down.. wish we could get this sort of assortment here in the UK, its abismal here. The gun trade should be ashamed of themselves.

U do fouling shots in between groups? U shot a cloverleaf on that Eley stuff. I bet the lube they put on their boolits coated ur barrel and then the group tightened after. Fouling shots matter