I recently purchased PSA's 10.5 complete upper. Upon inspection I found wwhat looked like a crack or fracture about 1.5" on the left side between towards the rear takedown. Not sure how that passed QC.. ot not sure how it was not detected during installation. Pretty disappointed! Sending it back and considering going with Aero. Heard about PSA's quality because they crank out so many products.
@@ctrip34 yea its a nice little piece if you have a clip style sling. doesn't take up much space. i've had it for years not even sure if they make them any more
I to love Alg triggers and probably will replace a lot of my mil spec to those. I have a similar upper from them but with a lighter rail. Pretty fun setup. Where about in Ohio are you from? I'm on the eastern side
If I'm not mistaken...When measuring OAL, you do not include muzzle devices or pistol braces. So the flash can and the SBPDW stock do not count for OAL. Only exception is if the muzzle device is pinned and welded.
You're correct. The courts measure "buffer to crown", but you may end up going to court to prove it as many LEO's will be superficial in their measurement. This is only for use with "pistol" laws and not "firearms".
not other than the two allen key's holind the rail on. i've never had an issue but i've also never had this out for a full day of shooting 5-600 rounds or so but still dont' see it being an issue.
Corey Daulton I think if you went two inches longer it would look better. But I’d rock that shit. I can’t see all that well at 200. Not in detail any way.
yea i haven't really shot it past 100 much. but i'd rather have that scope on something than just sitting in the safe. or maybe that'll give me an excuse to build a new one LOL
Sweet build man. I've been looking at that exact upper for a couple days now. Probably gonna run that with the sba3 brace and some kind of red dot. You've got a new subscriber
Corey Daulton ive had some bad luck with PSA lowers I dont care about blemishes or finish but 1 of mine had the pistol grip threads cross threaded and the other they managed to destroy the front pivot pin which was a motherfucker for me to get out and replace I just don't understand their QC or how you can allow stuff like that to ship
It’s very difficult for me to take you seriously when you’re wearing that hat. I served my country, but rallying behind a person of such character is not patriotism. This person has made a life of fucking people over, declaring bankruptcy so we taxpayers can bail him out, and making the most embarrassing statements with absolute assured providence of being correct, in spite of those pesky facts getting in the way. Look, we love guns, but let’s not be blind. Incidentally, when is this magical time where America is so great? Our history is the mass genocide and forced relocation of the indigenous population, slavery, repeated human rights violations to an embarrassing degree, so tell me... when is this fabled period where America is so great? If a disingenuous view of history is your goal, congratulations...nailed it.
Longfei Jiang you seem to have missed the point entirely. Also, I owe no reparations, it really just comes down to how would you treat your fellow man. There is not one Caucasian indigenous to North America. Ergo, we are all immigrants. The real question to ask is am I contributing to a culture of racism, homophobia, and utter nonsense? For my part I can say no, based on your reply... I’m not so sure. I’m going out on a limb to assume you’re most likely a Christian. Well, Christianity teaches love, compassion, and help for those in need, if Jesus (who by the way was Arabic) saw what was transpiring today, I’d think many self aggrandizing Christians would probably go straight to hell.
I was debating scope vs red dot on my psa 10.5 and this has definitely helped. 🤙🏾
Youd be surprised how angry people get about magnified optics on a pistol. Like really upset
@@coreyd1474 I’m one of those guys who could care less. I had one on my 300 blkout but it didn’t serve a purpose. This may serve one a bit more.
why does everyone who has a 10" barrel put a bipod and scope on it
They don't understand what cqb means.
Haha love it!
Some people forget to just "K.I.S.S." .. Red Dot only for a Truck Gun!
Its simple,,, its his gun he can do what ever the fuck he wants !
JuggusNawt maybe going for a RECCE build?
I recently purchased PSA's 10.5 complete upper. Upon inspection I found wwhat looked like a crack or fracture about 1.5" on the left side between towards the rear takedown. Not sure how that passed QC.. ot not sure how it was not detected during installation. Pretty disappointed! Sending it back and considering going with Aero.
Heard about PSA's quality because they crank out so many products.
yes
Why do so many people put huge scope on short guns? Am I missing out on something?
whats so huge about this scope?
@@coreyd1474 it's big and high powered for a short barrel...how far out is a 10.5 good for? Seems like a lot of extra weight.
@@CuttinInIdaho i've shot steel with this rifle at 500 yards pretty regularly. i guess it could get a little heavy to huck around
@@coreyd1474 shooting out to 500 sounds good. I cant find a straight answer on effectiveness which is why I use low power or no power on pistols.
@@CuttinInIdaho yea i get it. i don't have any magnification on mine now all red dots.
Great hat ! Wear it proudly ! What is the muzzle device on the 1st ar in this video ? Got a link to it?
psa organic flash can.
thanks
Love the hat, love the shirt. Great review!
thanks for watching!
Hey I know this video was long ago but what do you have on the rail behind the front mbos sight?
that is a piece made by magpul that is a place to attach a sling.
@@coreyd1474 that's what I thought it was. It just seemed really streamlined.
@@ctrip34 yea its a nice little piece if you have a clip style sling. doesn't take up much space. i've had it for years not even sure if they make them any more
Where did you get that shirt?!
I believe it was on zerofoxtrot.com
I to love Alg triggers and probably will replace a lot of my mil spec to those. I have a similar upper from them but with a lighter rail. Pretty fun setup. Where about in Ohio are you from? I'm on the eastern side
I"m in Columbus
Corey D hey brother I’m im Columbus too lol
Would you say it's accurate?
i would say it shoots pretty well for a 10 inch gun
A "pistol" must be under 26" OAL. Does this qualify?
not sure, i'll have to measure it.
If I'm not mistaken...When measuring OAL, you do not include muzzle devices or pistol braces. So the flash can and the SBPDW stock do not count for OAL. Only exception is if the muzzle device is pinned and welded.
You're correct. The courts measure "buffer to crown", but you may end up going to court to prove it as many LEO's will be superficial in their measurement. This is only for use with "pistol" laws and not "firearms".
What is the overall length (muzzle flash to brace) of the AR pistol with the brace all the way in?
will measure later
@@coreyd1474 thank you. I'm looking to build one and wanted to see if it fits my current bag/case.
@@th3coupl3 from front of the flash can to end of the stock collapsed its a smidge under 28 inches.
@@coreyd1474 thanks for the follow up. It is more compact than I thought, which is great. Will have to copy your build to compliment my AR 9.
@@th3coupl3 no problem! i always kept forgetting to measure it. To be honest out of all my ars i like the 9mili the best. good luck!
I ordered a 10.5 m loc pistol upper an a classic ar 15 lower will this cause any problems legally
You have to put a pistol brace on it
Asking for legal advice in the RUclips comment section... SMH
Knock knock, it's the ATF. Want to confess to any murders or tax evasion here too.........
Hey I have that same upper where you get that foregrip?
i got it from magpul
@@coreyd1474 what kind did you have to get for it to mount to the bottom since theres no rail?
that rail is m-loc. think i got a 10 piece rail set from amazon i can't remember now.
Zonkers, I'm buying one right now.
yes
it runs all .223 and 556 brands well?
yea from what i have tried it has.
Don't understand the scope on a riffle the is meant for close corners battles.I mean I guess is a personal choice.
can't say i have ever been in a close quarters battle with this rifle. i shoot 50 yards plus
Is there anything that keeps the rail from rotating?
not other than the two allen key's holind the rail on. i've never had an issue but i've also never had this out for a full day of shooting 5-600 rounds or so but still dont' see it being an issue.
MAKE AMERICA GREAT AGAIN!!!!!!
if only
That's one heavy optic setup for a shorty
yea i may go back to a sparc, but its still fun to shoot
Corey Daulton I think if you went two inches longer it would look better. But I’d rock that shit. I can’t see all that well at 200. Not in detail any way.
yea i haven't really shot it past 100 much. but i'd rather have that scope on something than just sitting in the safe. or maybe that'll give me an excuse to build a new one LOL
yea i agree!
Can i use sbr psa uppers on a m&p 15 lower, or any full size ar15 lower?
You betcha
Kid dont do that. Unless your gonna pay for the tax stamp. That would be an nfa item. Stick wi4h pistol lowers
Hey can you change the muzzle ?
yes.
Why the scope on the pistol????
because i had it and its fairly accurate to 100.
@@coreyd1474 sweet gun I want a pistol bad!
i've got three and they're all a blast to shoot. the 9mili is probably my favorite though. better build one!
Where did u get that dope ass shirt
i think i got it at zerofoxtrot.com but i can't remember
Nice Hat !
yes
Just found your channel and subscribed
thanks for watching!
Good video Corey
thank you
Sweet build man. I've been looking at that exact upper for a couple days now. Probably gonna run that with the sba3 brace and some kind of red dot. You've got a new subscriber
Thanks! i wish that brace was out when i was putting this together i would have one on it for sure.
do you have to have a sbr tax stamp or does it pass due to the buttstock
Holy mother of scopes lol...Sweet builds man. I was looking into getting that 10.5 upper.
its been good so far! thanks!
Those uppers are good to go with the chf barrel
Those lowers....ugh.
i have three of their lowers and one of them is a "blem" and i haven't had any issues.... yet...
Corey Daulton ive had some bad luck with PSA lowers
I dont care about blemishes or finish but 1 of mine had the pistol grip threads cross threaded and the other they managed to destroy the front pivot pin which was a motherfucker for me to get out and replace
I just don't understand their QC or how you can allow stuff like that to ship
it must depend on who's working that day LOL
Corey Daulton my rear takedown pin didnt align with the lug on the upper so i had to send my upper and lower back to psa
Thats my next build
go for it!
It’s very difficult for me to take you seriously when you’re wearing that hat. I served my country, but rallying behind a person of such character is not patriotism. This person has made a life of fucking people over, declaring bankruptcy so we taxpayers can bail him out, and making the most embarrassing statements with absolute assured providence of being correct, in spite of those pesky facts getting in the way. Look, we love guns, but let’s not be blind. Incidentally, when is this magical time where America is so great? Our history is the mass genocide and forced relocation of the indigenous population, slavery, repeated human rights violations to an embarrassing degree, so tell me... when is this fabled period where America is so great? If a disingenuous view of history is your goal, congratulations...nailed it.
Thanks for watching!
Thank you for standing up for whats right and outing the wrong
My sentiments exactly! I was hoping someone would call this BS out.
Longfei Jiang did you read a fucking word I said, probably not. Vomit our your next volley of bullshit, and enjoy the kool-aid.
Longfei Jiang you seem to have missed the point entirely.
Also, I owe no reparations, it really just comes down to how would you treat your fellow man. There is not one Caucasian indigenous to North America. Ergo, we are all immigrants.
The real question to ask is am I contributing to a culture of racism, homophobia, and utter nonsense? For my part I can say no, based on your reply... I’m not so sure.
I’m going out on a limb to assume you’re most likely a Christian. Well, Christianity teaches love, compassion, and help for those in need, if Jesus (who by the way was Arabic) saw what was transpiring today, I’d think many self aggrandizing Christians would probably go straight to hell.
Trump is
Trump>obama
you are
You seem like a good dude.. Why on earth would you wear that hat??
Because he wants too
Because he can wear whatever the fuck he wants,that's why
You seem like an ass. Let the guys have his own beliefs. You are all the same, think what you believe is the only moral thing. Get lost
Because he's NOT a liberal, socialist, progressive marxist democrat would be my 1st guess..........
cause 'Merika