Видео

I admire your "do it yourself" attitude, but when it comes to Ruger I would send it to them first and at least give them a chance to fix it. Who knows, if they couldn't get it right they might just send you a new gun thst shoots closer to point of aim. But a great video anyway.

How much grease do you usually give the wobble hub when doing daily servicing? Kinda wondering if I'm giving enough pumps... I have an 18HS head, and the wobble boxes have 1 zerk for each yoke, 1 zerk for the wobble hub, and 1 zerk (top and bottom) for the main housing bearing where it bolts onto the head for the drive shaft underneath the head that powers the LH side wobble. I might even just pop the hubs off and pump to see when it comes through the bearing. I'm going to archive this video in case Ihave to ever rebuild mine someday. That's crazy how that nut is supposed to stay without loctite... wow. Even a cotterpin would do wonders too, surprised not even a castle nut.

😊😊👍👍 I from THAILAND 🇨🇷⚡⚡🔥🔥

Great report and ammo review

As a photographer, I love that golden hour light and nice angle. Makes the video look inviting.

Honestly you cant beat this for the price point. With ammo prices these days ill probably pick one of these up just so i dont burn through as much .45. Ive seen people pop tiny groups with new sights. The main complaint ive seen from these is the factory sights are flimsy and slip around while shooting.

That is a dandy. Now you make me want one.

My go to: Federal HST SPEER GOLD DOTS Underwood Federal punch Hornady critical defense/duty Winchester defender Winchester ranger T only in .40s&w G9 Federal hydra shock deep Hornady XTP

Use, hv rounds, the work for this setup.

I love my GSG 1911 .22, have had it about 3 years, just a fun gun to shoot.

I've only discovered the Savage 99's in the last few years, and there aren't that many here in New Zealand. But I have found a couple, one in 250-Savage and a couple in 308. They are great rifles. I'm looking forward to getting out and doing more hunting with them. Good video, Thanks

What a women 😮 and what a rifle 👍

Great video love the old lever guns

Iv got one of the glendield 30 GT straight stock models in 30-30. Just love it !!!

These guns aren'r new. I've abuaed one for a decade and love it.

I put the target grips on both my N frames, (29,629) considerable improvement, especially on felt recoil on the palm of my hand.

Thanks for the video. I'm sorry to hear about your dad, prayers for you and your family.

I use H110 max load with 240 gr bullets.

You got to crank up the powder to get more stabilization. Bullets are going to slow. I have a Henry Big Boy 20" with 1:20 twist. I use 4 different rounds. Powder coated. The larger 300+ rounds can be drill pressed with a tapered end mill bit to make a 250-280gr hollow point. I use Ramshot Enforcer powder 21.4gr powder for 240-250gr and having good results. I also use my .452 bullets 240gr , powder coat them, and then run them thru my .430 sizing die. They run great!!!!!!

RE: The Underwood all copper rounds in .32, fires just fine in a PPK but locked up my first gen Seecamp so hard had to disassemble the gun to clear if out of the chamber...As to safe carry, older Walthers are NOT drop safe carry with the safety off and hammer down, no firing pin block. Newer guns have the firing pin block and are completely safe to carry hammer down, loaded chamber safety off. Lots of folks have been injured dropping loaded PPK's (safety off) in the last decade.

Found a minty 39A 78’ vintage and love it ! Missed the original i had previously so fixed that problem. I don’t like scopes on leverguns so i have been in the habit of mounting fiberoptic front sight replacements which upped my game. Purchased all replacement wear parts new old stock so if anything fails i’ll be ready for it. Have shot thousands of rounds through it and it never gets old, thanks.

Awesome video. I’ve been running my JD 567 many years. They are the best baler on the market

CAUTION! You CANNOT exceed 130 ft pounds with the ammo that you use in this gun. There's a card in the box that has this warning on it. You need to either Google the ammo and / or go to the website. Exceeding the 130 ft pounds WILL crack the frame. How do I know this? I actually cracked the frame and had to buy a new one because my gun was out of warranty. OUCH!

I have a 1957 model 39A. It’s barely used. I did have to replace the bull’s eye that fell out somewhere during moving the gun three times to escape flooding in the past 15 years. I had to do the same on my 1959 Model 99 semi auto. It has a “Marlin” 4x scope from the factory I think.

Upgraded the spring right when i got mine, and never had an issue. Over 5k rounds. Cci

St.Charles MO. Love the Henry. Keep up the good work.

Trigger pull needs to be lighter , u never said how far u were shooting , barrel length and wind matter also. 🤷

I know how u feel bub , sorry for your loss 👍🇺🇸

I just picked one up a whole Lotta research. I just wanted to upgrade my current 9 mm and I was in the pawnshop saw the browning 9 mm and didn’t even know browning made pistols, so I of course decided to purchase it.

Ok.. i have a 'few' pinned and recessed guns... first... pinned? probly not even worth mentioning.. good? never found it to matter. Recessed.. to me? recessed is a hindrance As the gun gets dirty it just makes it more likely that you can't seat the rounds in the chambers. and with non recessed chambers you can just wipe em. also with non recessed chambers you can visually see the brass rim and know if the gun is loaded or not. but.. I love the hammer mounted firing pin cause it looks cool.. it is the one feature of my 99% Colt Python I don't like..

I know I’m a year late but I’m thinking about getting the gun just trying to see which is better this or the .300 BLK version from Al

I have one of these shot a bunch it likes to shoot 75 yard 3 shot group but 5 shot group the last 2 seem to walk

Sounds like a great, sensible load in the SRC. Your shoulder will notice the difference over full house loads but game hit with it never will.

Wichita ks.....

A+ for effort..... Holy shit what a mess......

buffalo new york. thank you sir. I learned some things from your video

Your propane guy is just skirting the issue because he KNOWS what the deal is but he doesn't want to help you blow something up & be held responsible

Is this built in Cedar ? Hope we both visit our friends Dan $ Michelle and they helped you get this awesome plinkster

Sorry for your loss. If you are ever around Gallensons parking sucks but they carry ammo. If not hit up your local Cal-Ranch

Sorry to hear about Jack, miss the old lumber store days, good times

Arkansas here. I just bought this rifle early on Monday. Can't wait to test it out. Your videos awesome

Have a Ruger Super Blackhawk in .44 Mag. Before shortening the barrel to 5,5" from 7,5", it could shoot 5-6" 6" shot groups at 100m all day long with open sights. Use a 250gr Keith type hard cast bullet at 1400fps.

For my 45lc I love the Rim Rock 255gr SWC. I load them to the max allowed with Tite Group. I would love to see that in gel.

Maybe. It’s a brand new gun

Good job!

Señor, le diré que tiene razón. Es un pistola formidable. Acá en Argentina muy pocos tiradores, tienen la suerte de tenerla. Alta calidad, vino aquí con 3 cargadores y la buena mira sigligth. Aunque hoy x hoy, la mayoría de la gente va por las 9 m.m., porque no conocen la performance del calibre .45 para defensa. Igual pasó con el excelente y golpeador calibre .40 SW. No busco discutir con ningún "científico", solo que tengo la libertad de opinar, y lo hago. Gracias por compartir...✌️

THE SIG P228 IS THE M-11 NOT THE P-229. THE P-229 CAME OUT IN 40 CAL AND 357 SIG AND CAN BE HAD IN 9MM ALSO . THE 229 IS A BEEFER FRAME.

If that was my gun I’d change the sights. My 320 I put the Wilson Combat sights on it, shoots tad high at 25 yards which is fine for me. Glad your back!!

Glad to see you back at it! Navy SEALS used Sigs for a reason.

Not sure what it means to you, but my stuff all says 4.2 to 4.5 being around maximum for titegroup. I use a Lot of titegroup and it's finicky stuff. Shoots damn good no matter where I settle at, but I'm a little loath to play past the top. I shoot .3575 bullets in my 9mms so I abandoned factory load data for trial and error. Good video as always.