9 MM load development 3 shot 1 inch group this one is a winner
HTML-код
- Опубликовано: 15 янв 2024
- I think we are onto a good load. This load has the best accuracy so far. Thanks for watching Please comment and subscribe IF you are interested in agriculture content you might like my other channel. 10 cow ranch.
Flooring content on CT custom flooring
Disclaimer: All shooting is done on a private range in a safe manner. Do not do this at home
What a process!👍🏽😀❤️🇺🇸
I love Unique. It's so versatile. I'll put up with its dirty traits. But the new stuff isn't as dirty as the old was.😊
You are right the new stuff is better. The powder that I am using is probably 30 year old. Still good but it is the dirty stuff. I am happy with these results. The more I shoot the CZ 75 the more I like it. Might need to get another one just for back up haha Thanks for all of your great comments
Great group’s! It’s great when everything comes together. I have had my best groups with WW 231 when loaded with the hotter 1150-1200fps loads you might want to give it a try. 231 used to be the go to match powder for a lot of shooters.
I heard good things about 231 although I have never used it myself. I have had a request from a viewer to do some more load development with titegroup. It is good to hear from you Longshot. Have you had a chance to look at my other channel 10 cow ranch ??
Im you spill powder on indexing at the xl650, you can buy a 1/2 inch sealed ball bearing incl. a new screw. Alternativly buy the corresponding part from Armanov.
GREAT GROUPS AT 25 YARDS.
Thanks Herbert
I could tell right away that they were going to group well by the consistent ejection pattern.
I could tell the light was getting low from the muzzle blast too.
Looks like you found a good load!
I still think that you should try a few with 4.2 grains of Titegroup though.
I know it says that load is for a lead bullet but it’s what I load both plated and jacketed 115 grain bullets with and I get good velocity (@ 1135) and very good accuracy.
I have never thought about looking at the ejection pattern. I will try the 4.2 grains of titegroup. I am happy with this unique load but I don't love unique. I would rather use the titegroup (much cleaner). Thanks for the great comment
I'll call that load good.
Yes I think so too. It is nice to have a little success with this project. Thanks for watching IF you are interested in agriculture content you could check out my other channel 10 cow ranch Thank you in advance
I can't really do any better at 25 yards with a 9mm. If I'm at 2"-2.5" I call that good. I Used unique in my 40 s&w using data from the Speere book. When I was working on the load I had loaded 10 rounds each on the low, middle and high charge weight. I didn't even shoot the high. The low charge weight was what I was looking for and felt the high might be a bit much. So I ended up pulling those and reloaded them at the low charge.
I feel pretty good about these groups. I am real curious about the performance in the ballistic gel. Thanks for the comments
I load for accuracy. That usually isn’t the hottest load in the book. If it’s toward the bottom of the load listing and it cycles without issue and it’s accurate, I’m done. I see no reason for +P loads. It’s like slapping a turbo on a 4 cylinder and expecting V8 performance. You might get it for awhile but it’s going to wear out quicker.
I agree with you. Accuracy and reliability are what matters. I think the bullet will expand at this 1130ish velocity. I will do a test with the ballistics gel be loading a large quantity. @@boydsteenblock1328