Perhaps we should also consider only putting mags in when the bolt is locked back to reduce any possibility of damaging the lips? (even though it shouldn't matter, as they shouldn't crack if you do)
this is exactly what i was going to say, there are multiple firearms i've used where i've had to push harder with the bolt forward and a fully loaded mag. This has happened with my AR as well. I get my bog tomorrow so ill be able to test myself but im assuming its probably much easier with a locked bolt.
Has anyone else attempted to just press the magazine past the pressure the ammo puts on the extractor? Seems like people want to sissy their mag in and then go pissy ass on them if it doesn’t seat. There’s no need to slam the mags, just press them in a tad harder until you see the mag is driven in to its seating position.
Styer Aug Is magazines have been Made this way since it's conception The lips are very tough and unless you drop the magazine correctly on them you should not have any issues
Some guy at the range traded me his curved mags for my straights Love the gun Got a Romeo 5 and a magnifier on mine works great and the backup sights are visible through the riser
I got eight of the new mags and not one issue with the SP9A1 Gen 2. But I never had any issues with the first mags that came out or the metal lipped ones either. However...I had mass failure to eject rounds all the time, hence why I tried the metal lipped ones. Turns out my problem was the stock bolt spring, it is too heavy. An admin in a Facebook Stribog Magazine Issues group said to email Global Ordnance and request the free lighter bolt spring, and I had it in two weeks. My Stribog then was unstoppable, not one issue. If you have this issue too, get the lighter bolt spring.
Agreed. Love mine too.. thousands of rounds thru the strait mags with no issues, aside from ammo related problems..i got some super heavy grain subs with a flat nose and it wouldnt feed that bullet design. Other than that, flawless.
The BOG is by far my favorite gun to shoot. I will be getting the updated mags shortly. Wouldn’t mind seeing a roller delayed blow back kit for the earlier models.
The original stick mags don't function well with flat point/tip 9mm and certain Hollow Points. That was the biggest problem I had with mine. I just tested the new curve mags and they ran flat point 147gr Federal flawlessly. You're absolutely right. It brings the gun up to another level and can be trusted with your life. Gonna order 3 more curved mags and that will bring my mag count up to 16 😎
Sweet!!! I bought 2, but yet to hit range with them. I bout them after I ordered my A3 Tactical Scorpion Lower. Grand Power emailed me they’re new curved mag announcement a week or 2 after I pre ordered Lower. 🙄🙄
Did the mags get easier to seat on a closed bolt once the springs broke in a bit for you? I've read on FB that this happens, but can't find anyone on youtube who mentions it (but most are doing initial reviews like this one). Thanks!
I think that’s accurate, I’ve been back to the range several times since this video and I can’t recall noticing complications with seating the magazines. So yes, they “break in”.
Ive had the curved mag chip on me lately. Honestly global ordinance is being stupid with this. The Bog is an awesome pcc but man GO just cant seem to do it right.
I was wondering how your curved mags are holding up…. I’ve had 4 of 10 crack on the feed lips, over the pass couple years, if you have experienced this problem, please post a vid of your experience or conditions…. Wtf not putting metal feed lips?
hey bro just incase inspect your magazine catch, i found mine to have a crack and i think its from slamming the mags full. Global ord is sending me a new catch after i send them pictures
@@Mondomerve Only issue i got with HP was on the very last round. The round was fed sideways and jammed the action. Did not happen with fmj so I would load the frist round as an fmj and the rest HP, should not be an issue
Just got my 3 curved mags . I immediately noticed the seating issue with > 10 rnds was wondering if it was a mag catch or spring issue. Or maybe just dirty cause i shoot it suppressed. Once seated it ran flawlessly. Gonna clean it really well see if it helps
I've been waiting to buy one until that was resolved... I'm caught between this and the ptr mp5 clone . I was gonna really cheap out and get a cz scorpion but I finally shot one and the trigger was absolute BOOO BOOO... I think my first mod would be blacking out SKEETBOG TOO. haha
I thought the exact same thing! Why couldn't the idiots keep the metal feed lips? You'd think they'd do everything to get the 4th gen mags right and avoid any bad press but no, they want to save that extra dollar per mag on manufacturing.
Merve I like that Optic you have on that May I ask what it is? Would like to try it on my Rattler. Is it 4x32? Love the channel by the way great content had to subscribe and press that notifications button.
That is a primary arms cyclops 1X prism with green ACSS reticle. I have since replaced it with their new SLX 1x micro prism, which is smaller, lighter, and better in my opinion. www.primaryarms.com/primary-arms-slx-1x-microprism-with-green-illuminated-acss-cyclops-gen-2-reticle
Problems with functionality and longevity with stick mags. Functionality is fixed. Get back to me about the longevity in 6 months or more. Hopefully, it is a better polymer.
The bog mag doesn't need metal feed lips. It needs glass reinforced nylon like that old tried and tru stuff they been making the guns out of for 40 years
You would pay $50 for a metal feed lip mag? Like MPX / MP5 mag money? In the long run you’re better getting the Scorpion lower that takes $20 Magpul 35-rd mags and having mags that can be used in two platforms. Not to mention the other benefit of using AR triggers. I have to think this way in a soon to be communist mag restricted state!
Развлечения
Perhaps we should also consider only putting mags in when the bolt is locked back to reduce any possibility of damaging the lips? (even though it shouldn't matter, as they shouldn't crack if you do)
this is exactly what i was going to say, there are multiple firearms i've used where i've had to push harder with the bolt forward and a fully loaded mag. This has happened with my AR as well. I get my bog tomorrow so ill be able to test myself but im assuming its probably much easier with a locked bolt.
Has anyone else attempted to just press the magazine past the pressure the ammo puts on the extractor? Seems like people want to sissy their mag in and then go pissy ass on them if it doesn’t seat. There’s no need to slam the mags, just press them in a tad harder until you see the mag is driven in to its seating position.
@@JunCandelaPR yes that 100 percent works.
So happy they are doing the curve mag!
Styer Aug Is magazines have been Made this way since it's conception The lips are very tough and unless you drop the magazine correctly on them you should not have any issues
Some guy at the range traded me his curved mags for my straights
Love the gun
Got a Romeo 5 and a magnifier on mine works great and the backup sights are visible through the riser
It looks way better with curved mags..... that’s going to be my next purchase if they ever come back in stock... new subscriber!
They’re in stock
@@davioncooper1001 who has them? I’m in Charlotte and my regular stores can’t seem to keep them in
Just wait till lancer, Magpul and other companies come up with aftermarket mags
I got eight of the new mags and not one issue with the SP9A1 Gen 2.
But I never had any issues with the first mags that came out or the metal lipped ones either.
However...I had mass failure to eject rounds all the time, hence why I tried the metal lipped ones.
Turns out my problem was the stock bolt spring, it is too heavy.
An admin in a Facebook Stribog Magazine Issues group said to email Global Ordnance and request the free lighter bolt spring, and I had it in two weeks.
My Stribog then was unstoppable, not one issue.
If you have this issue too, get the lighter bolt spring.
Agreed. Love mine too.. thousands of rounds thru the strait mags with no issues, aside from ammo related problems..i got some super heavy grain subs with a flat nose and it wouldnt feed that bullet design. Other than that, flawless.
Thanks for the straight honest review. 👍🏻👍🏻
Man, that's a sick pistol. 9mm is so fun to shoot in that configuration too.
The BOG is by far my favorite gun to shoot. I will be getting the updated mags shortly. Wouldn’t mind seeing a roller delayed blow back kit for the earlier models.
I don't think that's possible. I remember hearing somewhere the actual receivers are different.
So you no longer need to buy a scorpion lower? You can just buy the curved mags???
Thanks for the info my guy I would have never knew lol I just ordered my mag appreciate the content and you gotta sub
Yup
The original stick mags don't function well with flat point/tip 9mm and certain Hollow Points. That was the biggest problem I had with mine. I just tested the new curve mags and they ran flat point 147gr Federal flawlessly. You're absolutely right. It brings the gun up to another level and can be trusted with your life. Gonna order 3 more curved mags and that will bring my mag count up to 16 😎
I like that angled foregrip
"I ordered 3 of them, so I can have...3 of them" 😄
Love my Bog, will definitely order some curved mags. Hopefully prices goes down.
Shit they should be almost giving them away for how they messed up.
My wife loves the straight 😁
What did you use to black out the lettering? Looks alot better.
Sweet!!! I bought 2, but yet to hit range with them. I bout them after I ordered my A3 Tactical Scorpion Lower. Grand Power emailed me they’re new curved mag announcement a week or 2 after I pre ordered Lower. 🙄🙄
Trust me, I was on the verge of swapping out to a different lower myself, held out just long enough!
Did the mags get easier to seat on a closed bolt once the springs broke in a bit for you? I've read on FB that this happens, but can't find anyone on youtube who mentions it (but most are doing initial reviews like this one). Thanks!
I think that’s accurate, I’ve been back to the range several times since this video and I can’t recall noticing complications with seating the magazines. So yes, they “break in”.
@@Mondomerve Thanks. That's what I'd read, but wanted someone to confirm it.
Where did you get that brace set up??
It’s made by grand power you can get it with the gun
Or Safety Harbour Firearms does an aftermarket version
That striborg is nice 👍🏾
Probably a trial run to see if they are 100% and will follow up with metal reinforcement curved mags in near future 👍👍🇺🇸🇺🇸
Nice👍 it looks much better than the straight magz hope it would more reliable than the old magz
Ive had the curved mag chip on me lately. Honestly global ordinance is being stupid with this. The Bog is an awesome pcc but man GO just cant seem to do it right.
I’ve had 4 out of 10 crack on the lips
I was wondering how your curved mags are holding up…. I’ve had 4 of 10 crack on the feed lips, over the pass couple years, if you have experienced this problem, please post a vid of your experience or conditions…. Wtf not putting metal feed lips?
hey bro just incase inspect your magazine catch, i found mine to have a crack and i think its from slamming the mags full. Global ord is sending me a new catch after i send them pictures
Where can I find that fore grip you have?
Strike industries Link Curve grip I believe.
Wait, that’s not right, I think it’s a UTG, can’t remember the model.
What did you use to black out the Stribog logo?
A paint marker used for marking metal, brand is “Markall”
Thank you! I’ll be doing the same. Just picked up an A3 today
did you fired hollow points?
that's where the problem lies got 3 new mags , haven't gone to the range yet
No, I haven’t fired hollow points, however, I’ve got a feeling it will cycle them for you. Let me know if you do get jams running HP’s
@@Mondomerve Only issue i got with HP was on the very last round. The round was fed sideways and jammed the action. Did not happen with fmj so I would load the frist round as an fmj and the rest HP, should not be an issue
Just got my 3 curved mags . I immediately noticed the seating issue with > 10 rnds was wondering if it was a mag catch or spring issue. Or maybe just dirty cause i shoot it suppressed. Once seated it ran flawlessly. Gonna clean it really well see if it helps
Where to find that brace?
Came on the gun at purchase, but I believe you can find them on Global Ordinance website, called a gear head works tail hook telescoping brace
Safety Harbour Firearms does a similar telescoping brace
Can you give the website to buy that gun? Is that SP9A1 gen2?
I picked this one up off Gunbroker.com for $1,300 but Global Ordnance is the importer and you can purchase from them. Mine is an SP9A3
Are the curved mags easier to load the rounds?
👍
Just got mine, so far absolutely flawless. Is that brace from global? How much did it cost?
Love the Tailhook braces. Like to know more about that too. No big black rubber baby buggy bumper with stupid velcro...
What brace is that? I gotta copy
I've been waiting to buy one until that was resolved... I'm caught between this and the ptr mp5 clone . I was gonna really cheap out and get a cz scorpion but I finally shot one and the trigger was absolute BOOO BOOO...
I think my first mod would be blacking out SKEETBOG TOO. haha
The metal lips for the curve mags will be coming in the gen 2 version.
Where’d you get this intel?
@@Mondomerve Just thinking out loud… it makes sense… like everything else, it will be improved.
Makes me think of my RFB. It just works. Every time. Always.
But, it's .308.
all you have to do is lock the bolt back before inserting the mag! problem solved. SHEESH
Or just press the mag in harder to compress the spring inside the loaded mag…
I thought the exact same thing! Why couldn't the idiots keep the metal feed lips? You'd think they'd do everything to get the 4th gen mags right and avoid any bad press but no, they want to save that extra dollar per mag on manufacturing.
slap it like it owes you money
Merve I like that Optic you have on that May I ask what it is? Would like to try it on my Rattler. Is it 4x32? Love the channel by the way great content had to subscribe and press that notifications button.
That is a primary arms cyclops 1X prism with green ACSS reticle. I have since replaced it with their new SLX 1x micro prism, which is smaller, lighter, and better in my opinion.
www.primaryarms.com/primary-arms-slx-1x-microprism-with-green-illuminated-acss-cyclops-gen-2-reticle
Problems with functionality and longevity with stick mags. Functionality is fixed. Get back to me about the longevity in 6 months or more. Hopefully, it is a better polymer.
and mine are not hard to load the rounds go in very easy idk why so many people be saying that my g2c mag is harder to load lol ....
pmags have plastic feed lips, no need for metal. metal can bend. plastic will deform and return to original shape.
dont need metal mine never had an issue
Did you get a tax stamp to SBR ur Stribog? My understanding of the law is you cannot have a brace AND a forend grip on a pistol.
Just can’t be a vertical grip.
The bog mag doesn't need metal feed lips. It needs glass reinforced nylon like that old tried and tru stuff they been making the guns out of for 40 years
They must have put them on the straight mags out of ignorance….. Lancer mags incorporate this feature and they’re among the best.
@@Mondomerve I don't fuck with lancer. Stanag, Magpul, or go home
You would pay $50 for a metal feed lip mag? Like MPX / MP5 mag money? In the long run you’re better getting the Scorpion lower that takes $20 Magpul 35-rd mags and having mags that can be used in two platforms. Not to mention the other benefit of using AR triggers. I have to think this way in a soon to be communist mag restricted state!
Indoor range mag dump? unsub