ALFAVITAGA
ALFAVITAGA
  • Видео 116
  • Просмотров 2 412 104
RSV4 | Gabro MTorque Map | Ride Review
Gabros MTorque map releases all the available power on the lower gears for your Aprilia RSV4 & Tuono V4 on Aprilia Engine Map 1 (AEM1).
How to install UpMap on the Aprilia RSV4 & Tuono V4: ruclips.net/video/veqXeRo8pLo/видео.html
How to install Gabros Velocity Stacks: ruclips.net/video/7qOz0Wa3pyo/видео.html
Like & Subscribe for more videos!
Просмотров: 3 246

Видео

RSV4 | Flyhammer Sprocket Cover | Install
Просмотров 561День назад
How to install the Flyhammer Sprocket Cover on the Aprilia RSV4 & Tuono V4. The stock chain guide is too thick, leaving no clearance to fit the Flyhammer sprocket cover. In order to have correct fitment the aftermarket chain guide must be purchased. Flyhammer Sprocket Cover: cbcmoto.com/products/flyhammer-racing-sprocket-cover-for-aprilia-rsv4-tuono-v4 Thinner Chain Guide: cbcmoto.com/products/...
How To Set Up Motorcycle 360° Camera | Rear View
Просмотров 646Месяц назад
How to set up 360° rear camera view on your motorcycle. This set up is done on the Aprilia RSV4 but is identical on the Aprilia RS660. This setup can be applied on most motorcycles utilizing the rear foot peg mounts. Parts needed for this setup: Foot Peg Clamps: www.amazon.com/dp/B0C898M56W?ref=ppx_pop_mob_ap_share 360° Adapter Screw: www.amazon.com/dp/B09WZVXPKW?ref=ppx_pop_mob_ap_share TELESI...
RSV4 & RS660 | How To Select Sprocket Size | Effects On Motorcycle Geometry
Просмотров 1,8 тыс.Месяц назад
How to select sprocket size on your Aprilia RSV4 and RS660 or any bike for that matter. Sprocket size not only affects the gear ratio, but the geometry of the bike. In this video I'm covering the effects of sprocket size on: Gear Ratio, Wheelbase, Anti-Squat and Suspension. Related Video Links RSV4 520 Chain & Sprocket Install: ruclips.net/video/XkIX-U7TeJo/видео.html RSV4 520 Chain & Sprocket ...
RSV4 | 520 Chain & Sprocket | Ride Review
Просмотров 2,5 тыс.2 месяца назад
I took my Aprilia RSV4 for a ride to review the 520 Chain & Sprocket Conversion. I increased the rear sprocket to 43 teeth from 41 stock, and kept the front sprocket stock at 16 teeth. This is Part 2 video from Part 1 installation. Part 1: ruclips.net/video/XkIX-U7TeJo/видео.html Like & Subscribe for more videos!
RSV4 | 520 Chain & Sprocket Conversion | Install
Просмотров 2,7 тыс.2 месяца назад
How to install Aprilia RSV4 and Tuono V4, 520 Chain and Sprocket Conversion. RSV4 520 Conversion Race Kit: (1) Superlite XD Series chromoly steel drilled and lightened front sprocket (1) Superlite RSX-R Series black hard anodized alloy rear race sprocket (1) High strength D.I.D. 520 Super Street 520 ERV7 Race Series X'ring sealed chain (1) Matching D.I.D. Rivet style connecting link Link: www.d...
RSV4 | Carbon Brake Cooler Ducts | Install
Просмотров 2 тыс.2 месяца назад
How to install Carbon Brake Cooling Ducts on the Aprilia RSV4 and Tuono V4. OEM Aprilia Brake Cooler Ducts Kit: www.af1racing.com/2s001379-oem-aprilia-brake-cooler-ducts-kit-2s001379 Like & Subscribe for more videos!
RSV4 | Bonamici Rearsets | Install
Просмотров 3,2 тыс.3 месяца назад
How to install Bonamici Rearsets on the Aprilia RSV4 1100 and the Tuono V4. Bonamici Rearsets GP Shift: www.motovationusa.com/adjustable-rearsets-by-bonamici-aprilia-rsv4-tuono-1100-A005SR?mmyId=189694&mmy=Aprilia-RSV4-1100-Factory-2022 Note: The rearsets I installed in this video are the race version, reverse shift or GP shift. The race version reasets do not come with the brake switch. If you...
RSV4 | Luimoto Seat Cover | Install
Просмотров 4 тыс.9 месяцев назад
RSV4 | Luimoto Seat Cover | Install
RSV4 | Carbon Frame & Swingarm Covers - Extreme Components | Install
Просмотров 7 тыс.10 месяцев назад
RSV4 | Carbon Frame & Swingarm Covers - Extreme Components | Install
RSV4 | Exhaust Servo Motor Removal | How To
Просмотров 5 тыс.10 месяцев назад
RSV4 | Exhaust Servo Motor Removal | How To
RSV4 | Gabro Velocity Stacks + GP22 | DYNO
Просмотров 12 тыс.11 месяцев назад
RSV4 | Gabro Velocity Stacks GP22 | DYNO
RSV4 | Gabro Velocity Stacks | Install
Просмотров 8 тыс.11 месяцев назад
RSV4 | Gabro Velocity Stacks | Install
RSV4 | GP22 ON BOARD | PURE SOUND
Просмотров 12 тыс.Год назад
RSV4 | GP22 ON BOARD | PURE SOUND
RSV4 | Upmap T800+ | Install
Просмотров 6 тыс.Год назад
RSV4 | Upmap T800 | Install
RSV4 | GP22 Exhaust VS Stock | Revs - Flybys - On Board
Просмотров 22 тыс.Год назад
RSV4 | GP22 Exhaust VS Stock | Revs - Flybys - On Board
RSV4 | SC Project GP22 | Install
Просмотров 14 тыс.Год назад
RSV4 | SC Project GP22 | Install
RS 660 | How to Setup Your Suspension
Просмотров 24 тыс.Год назад
RS 660 | How to Setup Your Suspension
RSV4 | TechSpec Tank Grips | Install
Просмотров 2 тыс.Год назад
RSV4 | TechSpec Tank Grips | Install
RSV4 | Spider Brake & Clutch Levers | Install
Просмотров 3,6 тыс.Год назад
RSV4 | Spider Brake & Clutch Levers | Install
RSV4 | Spider Gas Cap | Install
Просмотров 3,7 тыс.Год назад
RSV4 | Spider Gas Cap | Install
RSV4 | New Rage Cycles Fender Eliminator | Install
Просмотров 4 тыс.Год назад
RSV4 | New Rage Cycles Fender Eliminator | Install
RSV4 | Stock Horsepower Baseline | Warranty Claim While On The Dyno
Просмотров 8 тыс.Год назад
RSV4 | Stock Horsepower Baseline | Warranty Claim While On The Dyno
Aprilia RSV4 VS Yamaha R6 | Crazy Elbow Drag
Просмотров 2,5 тыс.Год назад
Aprilia RSV4 VS Yamaha R6 | Crazy Elbow Drag
RSV4 | First Ride Reaction | It's A Beast
Просмотров 6 тыс.Год назад
RSV4 | First Ride Reaction | It's A Beast
I BOUGHT MY DREAM BIKE PAYING CASH!
Просмотров 3,6 тыс.Год назад
I BOUGHT MY DREAM BIKE PAYING CASH!
RS 660 | Passenger Pegs with SC Project Exhaust | How to fit
Просмотров 9 тыс.Год назад
RS 660 | Passenger Pegs with SC Project Exhaust | How to fit
Aprilia RS 660 | Walkaround Modifications & Accessories
Просмотров 60 тыс.Год назад
Aprilia RS 660 | Walkaround Modifications & Accessories
RS 660 | CRT VS SC1-R | Revs - Flybys - On Board Sound
Просмотров 39 тыс.Год назад
RS 660 | CRT VS SC1-R | Revs - Flybys - On Board Sound
RS 660 | Dyno Results | CRT VS SC1-R VS Gabro's Velocity Stacks
Просмотров 35 тыс.Год назад
RS 660 | Dyno Results | CRT VS SC1-R VS Gabro's Velocity Stacks

Комментарии

  • @manuelsannino3452
    @manuelsannino3452 4 часа назад

    Sounds like a mini v4

  • @Alex69398
    @Alex69398 8 часов назад

    Ciao! It Is the complete race exhaust without db killer?

  • @niamartinezz
    @niamartinezz 12 часов назад

    Crazy how shitty that aprilia sounds

  • @jasperspaans2806
    @jasperspaans2806 14 часов назад

    How is the color compared to the OEM color?

  • @bao_motor
    @bao_motor 16 часов назад

    as i read somewhere , there's a way to changing wheelbase by adjusting frame corner. Only Rsv4 have this function

  • @robertbryant1845
    @robertbryant1845 День назад

    It sounds like you had a blast man. I’d be interested to know if Gabro do this for 660 as I’m still loving this bike, but the upgrades your doing on the RSV4 have got me lookin bro

  • @angela.8673
    @angela.8673 День назад

    thanks for the vid! im looking to install a SC1-R on my 660. at the 4:45 though, does the bike need to have Bluetooth in it? or is that the Bluetooth for the phone? cause my aprilia didn't came with the Bluetooth option. i was wondering if i need to have the MIA Module for this to work. thanks!!!

  • @954mikelee
    @954mikelee День назад

    Can I rewrite over a brentuning that's on my bike with this map?

    • @dteal23
      @dteal23 День назад

      @@954mikelee you have their device? I’d reflag it to stock first, then flash it with the Gabro tune.

  • @wedgehorsepower9869
    @wedgehorsepower9869 День назад

    I have the same map on my 21 RSV4…. It definitely opens my eyes now…I love my Aprilia

  • @MadWilli
    @MadWilli День назад

    Did you sell the 660?

  • @faroerides7851
    @faroerides7851 День назад

    I would love this but I an really worried that it will melt the shoes or burn the foot of the passanger, i saw another comment and you responded with you tested it but if the passanger is unexperienced and they have the foot far back on the pegs could it be a hazard?

  • @danielwest8414
    @danielwest8414 День назад

    how can you avoid breaking the switch when installing the clutch lever? I am about to install spider levers

  • @goldhorizon2965
    @goldhorizon2965 День назад

    Are you about to clutch up in second without the bike cutting out?

  • @Dstkk_07
    @Dstkk_07 2 дня назад

    What were the torque settings for the bolts?

  • @barssogatlar7347
    @barssogatlar7347 2 дня назад

    Hello, I have a 2024 model tuono v4, I want to install a slip on, I live in Turkey, what kind of problems will I encounter if I install it without mapping, thank you.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@barssogatlar7347 I don’t recommend installing a decat slip on without a map. You would definitely need a servo motor bypass without a map. You will experience idling issues and the air/fuel ratio will be very lean, resulting in future engine damage. V4 are delicate engines. You need to take care of them or they won’t last. ✌️

  • @barssogatlar7347
    @barssogatlar7347 2 дня назад

    Hello, I have a 2024 model tuono v4, I want to install a slip on, I live in Turkey, what kind of problems will I encounter if I install it without mapping, thank you.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@barssogatlar7347 I don’t recommend installing a decat slip on without a map. You would definitely need a servo motor bypass without a map. You will experience idling issues and the air/fuel ratio will be very lean, resulting in future engine damage. V4 are delicate engines. You need to take care of them or they won’t last. ✌️

  • @2leet2hax
    @2leet2hax 2 дня назад

    Lost the seat cowl on drive home. Found it but pretty scratched up. Ordered a new one. Cannot seem to get it to lock into latch without it being easily removable. Am i missing something putting it on?

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@2leet2hax The front pin of the rear cowl that latches on the lock has two positions. One for the RS660 and one for the RSV4. Assuming you have it on the right position, the rear cowl is much easier to insert it than remove it. When I turn the key to remove the cowl it does not come off easy for me either. I have to put some effort and be careful not to break the two rear plastic inserts. ✌️

  • @chris.RS660
    @chris.RS660 2 дня назад

    Can’t wait to be able to ride like this

  • @gabroracing
    @gabroracing 2 дня назад

    also AEM2 in "un-locked" but retain a little restriction in both 2st and 2nd. AEM1 is completely unleashed instead

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@gabroracing 💯⬆️👌

  • @RB52Dogan
    @RB52Dogan 2 дня назад

    I just installed the map, but I can't test the bike to feel the difference due to the bad rain here. BTW I have superlight forged wheels, and I highly recommend lighter wheels on this bike

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@RB52Dogan I have CoreMoto Apex6 forged wheels waiting to be installed for the next video 👌

    • @RB52Dogan
      @RB52Dogan 2 дня назад

      @@ALFAVITAGA Stellar! Big difference when you are transitioning from turn to turn at 150+mph

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@RB52Dogan Can’t wait 👌

  • @joyfulpyro2589
    @joyfulpyro2589 2 дня назад

    If you don't mind where did you get the grip tape from on the lower part of the frame by the rear sets? I have been trying to find some for my frame and swing arm by the paddock stand pins. Awesome job on this bike.

  • @dteal23
    @dteal23 2 дня назад

    Was waiting on a review for this! I was in the forum asking people, barely any responses… so I was thinking going back to stock gearing (I am +2 rear) so 1st and 2nd lasts longer.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@dteal23 I’m +2 on the rear(43T). With this map I’ll drop to 42T and add forged wheels. 👌

  • @selman.arslanmd
    @selman.arslanmd 3 дня назад

    good ride but stay safe

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@selman.arslanmd Thank you! ✌️

  • @GC-86
    @GC-86 3 дня назад

    are the AWC and ATC still functional?

    • @dteal23
      @dteal23 2 дня назад

      Yes. Gabro confirmed on the Aprilia forum.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@GC-86 Everything remains functional. Even cruise control ✌️

  • @KhrisRidez
    @KhrisRidez 3 дня назад

    Thank you! I been waiting for somebody to review that map before I pull the trigger 😈👌🏾💯

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@KhrisRidez You’re welcome 👌100% worth it!

  • @oooxmisterxoo
    @oooxmisterxoo 3 дня назад

    The sound is amazing, stay safe 👍

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@oooxmisterxoo Thank you, I appreciate it! ✌️

  • @bao_motor
    @bao_motor 3 дня назад

    can you make a comparision between this bike and V4s

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@bao_motor Yes! It’s on my next videos coming soon ✌️

  • @kupalisky3553
    @kupalisky3553 3 дня назад

    This map requires the velocity stacks?

    • @KhrisRidez
      @KhrisRidez 3 дня назад

      No , Gabros has different setups for The Mtorque Maps but if you want yours to ride like his setup you need the velocity stacks and exhaust etc.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@kupalisky3553 As Khris said, there are multiple MTorque maps that don’t require stacks ✌️

  • @user-challbad
    @user-challbad 4 дня назад

    perfect one more time bro thenx…can't wait to see the next video… 💪

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@user-challbad Thank you! There coming up 👌✌️

  • @davidgutowski3138
    @davidgutowski3138 4 дня назад

    What brand are the Lever Guards for the brake and Clutch? I usually only find the brake side that looks good.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@davidgutowski3138 Made by Spider Racing. My top favorite levers. ✌️

  • @beastmaster6428
    @beastmaster6428 4 дня назад

    A litre bike is louder than a 600 🤯🤯🤯🤯 who wouldve thought

  • @barbararustici574
    @barbararustici574 7 дней назад

    Fantastica ,👑👑👑👑

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@barbararustici574 💯✌️

  • @kraken2459
    @kraken2459 8 дней назад

    i got the sc project clt41t for my bike im just waiting for it to come in just wondering if its as loud as the crt ?

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@kraken2459 CRT is louder. But the S1 is also very loud. I prefer the CRT but the S1 is very similar. ✌️

  • @ImNoTourist
    @ImNoTourist 8 дней назад

    Dude nice vid but I do recommend knee pads. I was young once and did what you do.... trust me, get knee pads, you will thank me in 15 years.....

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@ImNoTourist 3 herniated discs. Trust me I know what you’re talking about. I’ll consider the knee pads 👌✌️

  • @ivanramos70
    @ivanramos70 8 дней назад

    How much doe exotica charge for a dyno

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@ivanramos70 I don’t remember exactly. Just over a hundred bucks.

  • @Lalnuna_08
    @Lalnuna_08 8 дней назад

    Velocity stacks Can i use in rs457 good or not good..sir

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@Lalnuna_08 No. Velocity stacks are made dedicated for each bike.

  • @jakeheppting
    @jakeheppting 9 дней назад

    Does this SC1-R have the baffle removed or still intact? Still sounds amazing

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@jakeheppting Baffle removed. Both sound amazing in person ✌️

  • @660xV7
    @660xV7 9 дней назад

    Looking forward to the RSV4/660 comparison! Just installed the sprocket cover on my 660. Shifting definitely feels improved. Interested to hear your review. At the same time, I installed the Lightech adjusters and used the Motion Pro chain alignment tool to get the chain perfectly straight, so maybe that helped too? Either way, it’s much nicer now.

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@660xV7 I’m doing lightech chain adjusters next. 👌✌️RS660/RSV4 comp coming soon.

  • @jamescsl88
    @jamescsl88 9 дней назад

    @alfavitaga this may be irrelevant to the sprocket cover but I would like to know where you get the selfie stick holder and is it universal?

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@jamescsl88 This video will go over all the details. But yes it is universal. ruclips.net/video/g994e00GrUw/видео.htmlsi=g3X0BiRFG3l_5AYH

  • @sabahanlife6141
    @sabahanlife6141 9 дней назад

    The GP22 sounds like a beast ready to kill

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      @@sabahanlife6141 💯👌✌️

  • @AlenFrank-wq6mu
    @AlenFrank-wq6mu 10 дней назад

    Always fun watching your Aprilia content! Question, if you could only do 3 mods on an RS 660 which would they be? :-) Also would be great if you could show before and after in your modding videos at the end perhaps 😇

    • @ALFAVITAGA
      @ALFAVITAGA 10 дней назад

      @@AlenFrank-wq6mu Thank you! It’s difficult to choose only 3 mods. Also every mod is based on personal preference. My preference would be 1) Triple Clamp and Clip Ons - The stock handlebars, although very comfortable, are too tall for a proper race position. 2) Exhaust & Tune - This will eliminate the flat spot and give it a bit more power as the RS660 needs it. 3) Suspension - Not so much for the front forks as they are decent if you are under 200lbs but mostly for the rear shock. And if I could do a 4th mod it would be gearing. Preferably a 47T. ✌️

    • @AlenFrank-wq6mu
      @AlenFrank-wq6mu 10 дней назад

      @@ALFAVITAGA Awesome thanks 🙌

  • @demmyk
    @demmyk 10 дней назад

    Definitely worth it!! 🙌🏼🙌🏼🙌🏼

  • @project618
    @project618 10 дней назад

    wow a year already in owning the RSV4 that's gone by quick. Can't beat a gold chain so of course you have to show it all off with the semi see through cover.

    • @ALFAVITAGA
      @ALFAVITAGA 10 дней назад

      @@project618 It’s crazy how time goes by. True, nothing beats a gold chain 👌

  • @superbikesquadracer
    @superbikesquadracer 10 дней назад

    Every single detail makes a huge diffrence! Great vid buddy! Amazing parts!

    • @ALFAVITAGA
      @ALFAVITAGA 10 дней назад

      @@superbikesquadracer 💯 👌 Thank you!

  • @gfs851
    @gfs851 11 дней назад

    Great video, please let me know if this is the same process for 2020 RSV4 Factory. Thanks

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      Yes the process is identical ✌️

  • @abeejacob
    @abeejacob 12 дней назад

    Would you be able to do a comparison video between rs660 vs rsv4 and your thoughts on it?

    • @ALFAVITAGA
      @ALFAVITAGA 2 дня назад

      Yes. It’s in the plans to make one ✌️

  • @lc500yyc
    @lc500yyc 13 дней назад

    Looks great you could even add a seat warmer while you're at it

  • @lc500yyc
    @lc500yyc 13 дней назад

    I didn't know these existed, I vynil wrapped mine

  • @andrelima5124
    @andrelima5124 13 дней назад

    What a wicked spitting fire little dragon 🔥🤣

  • @lucatrezzy
    @lucatrezzy 13 дней назад

    the crt is so loud, yet sounds so good