RSV4 | Spider Gas Cap | Install
HTML-код
- Опубликовано: 12 сен 2024
- How to install the Spider Racing Gas Cap on the Aprilia RSV4 and Tuono V4.
Spider Gas Cap: www.hsbkracing...
Like and Subscribe for more videos.
Disclaimer: I am not a mechanic. You are viewing the materials and using the information contained in this video at your sole risk.
Nice video thanks for taking the time to share it 👍👍🏍️🎉
Absolutely! ✌️
Thank you so much this is life saver. I left the spacer and rode with gap on the fuel cap 😵💫
Thank you, I’m glad it helped! ✌️
Bravo sir… bravo..👏 👏👏👏 couldn’t have done it the CORRECT without this wonderful information 😊
Thank you! I’m glad it helped! ✌️
If I didn’t need the key for the gas cap I’d probably leave it in the ignition returning to a space where my bike once was after paying for fuel ⛽️
I do leave my key on the ignition when I fill gas, but I fill while being on my bike. If I choose to walk away I take my key with me and probably lock the handlebars too ✌️
Great video Mike! Thank you for the tips! 👍🏼
You’re welcome! ✌️
Nice video , they should really think of giving black screws and change the hex for torx, those small hex strip to quick.
Black torx screws would be perfect. But we can always change them ourselves. ✌️
0:42 hello, great video. Was hoping you could tell me the dimension of the spacers. Mines were missing when I bought kit (long story but supplier couldn’t help) was wondering if you could give me dimensions to see if I could replacements or use something similar to do same job. Thanks for your help in advance.
You can still install the gas cap if you don’t have the spacers. As long as you have the hex nuts. The spacers are just there to make the install easier.
Great content
Thank you! ✌️
Were you able to find tank pad (carbon look) that goes on Factory models, between number 54 on tank and gas cap?
Yes! I installed it. I will upload an on board ride video in a few hours and you will see the carbon tank decal. ✌️
@@ALFAVITAGA Awesome. Where did you buy it?
@kecabojan From AF1 Racing
Did you notice fuel condensation at the top of the Spider cover ? I installed mine yesterday and noticed today some residue around the cover and it stays, is it normal venting ?
I noticed that with the Spider cap I get more tank pressure compared to stock when I open the cap. As if its not venting as good as the stock. Thats why I want to remove the evap canister in hopes that it will help. But yes it does leave a bit of fuel residue on the cap. Nothing crazy though.
Do you get more tank pressure when you use one of these? I replaced my stock cap immediately after I bough the bike with the TWM cap. I'm getting a big whoosh after the bike warms up properly and I open the cap. Can't tell if the bike has a problem or the cap is messed up somehow. The dealer says it's normal but I have a few other bikes, none of them have that issue and they all have TWM caps.
RSV4’s tend to build pressure in the tank. Even with the stock cap. But with the aftermarket cap, I get more pressure than before. I will remove the EVAP canister and see if that helps a bit. But it’s normal though..
@@ALFAVITAGA Thanks. I'll remove my EVAP too. I had issues with it on the Panigale V4.
Man I wish this was available when I installed mine! Lol my dumb self managed to drop one of the nuts in the gas tank smh
Oh man Im sorry about that. I noticed there was no good video available, so I figured Ill make one to help others installing it the right way. ✌️