Does a Nibbi Racing Vortex Throttle and Throttle Cable Make a Difference? (Install Video)
HTML-код
- Опубликовано: 13 авг 2023
- In this episode of the pit bike build I install a Nibbi Racing vortex throttle assembly and Nibbi racing throttle cable to replace the stock cable that broke when riding last week. The Nibbi vortex throttle was installed with the cable to see if that would make the throttle feel smoother and snappier. Watch the video to see what I thought.
If you are interested in the X-Pro Storm or any of the upgrades I have on my bike you can purchase them from these links. I am affiliated with Amazon and Ebay and make commission off of the links below.
You can buy the NEW 2023 X-Pro Storm 125cc dirt bike from
amzn.to/3sYLss3
or
www.powersportsmax.com/produc...
(Parts installed)
Nibbi Carburetor
amzn.to/3l7lheL
Nibbi Foam Air Filter
amzn.to/3yro4lZ
Nibbi High Flow Black Air Filter
amzn.to/4314utL
Pro Taper Xr-50 bend Handlebars
amzn.to/3vy9pEo
Pro Taper Pillow top grips
amzn.to/3Z4pL4Y
ODI Dbk fifty handlebars
www.odigrips.com/products/mx-...
ODI rogue mx single ply grips
www.odigrips.com/products/rog...
Rk racing chain
amzn.to/3HqKOqD
Uni filter
amzn.to/3H8MFQn
Rear Shock Upgrade
amzn.to/3R6YtHz
Maxima Fork Oil
amzn.to/3j3DqJn
Guts Racing KTM 50sx 2016-2023 Tall Soft Seat Foam with Gripper Seat Cover
Replacement Spokes
ebay.us/rma3Xc
amzn.to/3MNQjTs Motion Pro Lite Loc
amzn.to/49SunRl IRC Tire Tubes
ebay.us/N4XuDJ Dunlop MX 34 Tires
Mods to come soon
TBPARTS.com 138 cc racing engine kit
Thank you GO PRO, ODI, TBPARTS.COM, LEATT, DUNLOP, NIBBI RACING, and BIKEGRAPHIX for sponsoring us and helping the channel continue to make videos. 
Кино
First time i seen the storm i think im getting the colbolt same nice seat most of them have lousy seats colbolt the back fender points up more that broke in 8 months
I upgraded the seat to a guts racing tall seat foam and gripper seat cover.
Ohh wow ❤️
I love my Storm 150 DLX its a gr8 bike! I may do this upgrade, my bike is bright green soooooo it would match nicely
It definitely catches your eyes. Super bright! That's Awesome! Glad it's a good one.
What pilot jet and settings on that carb? Needle and main?
ruclips.net/video/gdQr3prm9D0/видео.html
Here's a video on the installation and tuning. I run the factory jetting on the 4th needle clip.
Without being there I can't be much help on the stock carb , because I'm not sure about the carburetor you have. I will tell you that my bike ran perfect from the factory and my brother's did not. We had to put a new carburetor on his bike for it to run right. Now, what I would do is take the carburetor off and make sure that the main jet and the pilot jet are clean. Once you know they are perfectly clean, then you'll know if you need to look elsewhere. Make sure your air filter is tight on the carburetor, too. That way, you know there isn't extra air coming in throwing the mixture off.
What clutch lever fits the best on these bikes? Do MVS for good?
I kept mine stock so far. My brother upgraded his to the shorter levers from pitpro racing. The stock levers are a foldable design so I haven't needed to change yet.
I tried putting my nibbi carb on. The cable was like 1 1/2 inches too long. Because i couldn't use the stock 90° elbow on carb cap. Did you have the same issue?
ruclips.net/video/gdQr3prm9D0/видео.htmlsi=tlqMhEnoMwjFxvbL
Check out this video at 4:38 mins and 6:05 mins and see if this helps you out.
Let me know either way.
Factory sucks as soon as the cable comes out of the throttle it's a corner i had a Yamaha 80 that wore out there should b straight up to a bend if you ask me.
Hello,
I have an apollo rfz 125 jaguar and thinking about the nibbi 22mm. Will it be good? Mine actual carburetor cause my pit bike to bog on high rpms also feels like it’s soo weak tbh, will the nibbi help somehow? And should I change the jets or leave it as it is and try to tune it?
ruclips.net/video/gdQr3prm9D0/видео.html
ruclips.net/video/9Bh-WyGMCYg/видео.html
Check out the two links above. The nibbi carb woke mine up tremendously, the speed test video will show the proof. The 22mm should be perfect for your bike. If your bike is running perfect and tuned perfect now, you might not see a huge gain mine was significant though. After you watch the videos let me know what you think and if you have any other questions.
@@MartinRacingChannelthe speed test proces that it definitely does something, also my bike is weak (does not want to rev up while going uphill) and my actual carb is just a pain in You know where to tune because the screw is under (?) the carb and you are getting your fingers burn from cylinder while trying to do something with it + when I am doing top speed run on 4th gear my bike on high rpm just bogs and I have to let the throthle off and then on again to go on. The top speed is 40/45 km/h (not sure how much in mph it is) also can’t ride while not wide open, because it bogs in middle of the throtle so. Annoying as hell being honest hope this nibbi will help me out somehow it looks like it’s easier to tune than mine actual one. I don’t think I have any questions everything is in Your videos, also thanks for fast response!
(I’m from Poland so if there are any grammar problems, Please ignore still learning)
@sewerynsowik797 No problem at all. I hope it helps you out. You could also get a new spark plug when you install the carburetor. That way you will know the fuel and spark are good to go. Let me know how it goes after installing them. If you need any help let me know. That's Awesome we are so far apart ,thanks for checking out the channel!
@@MartinRacingChannel So I'm holding with buying new carburetor because the nibbi one is not available in any shops in my country (must order from amazon so shipping price etc.) but I have an issue with my actual one: The idle screw is doing nothing, my pit bike is goes out this screw is doing really nothing, don't know what could be wrong tbh, also I will try to get the air-to-fuel screw (This one "under" the carb) to go all the way in then 1 and 3/4 out maybe this will help somehow. Also the idle screw issue seems strange to me (Maybe some leak and getting air from where it shouldn't)
@sewerynsowik797 ruclips.net/video/V0fd0bFA1yA/видео.html
Check out this guy's videos he normally works on apollo 125s however some of the videos are a couple of years old so I'm not sure if he will respond or not. Let me know how it goes.
Just ordered this exact bike, super excited, the site says it goes 55, does it really go that fast?
That's Awesome! I haven't done a top speed run with a GPS to check the speed , but I would say yes. Over or under by a few mph depending on your weight. They're quick for a pitbike! You'll be impressed if you've ever ridden a crf110 or something similar.
@@MartinRacingChannel i ordered it off powersportsmax, it said refurbished fully assembled, the pictures it still looked brand new wrapped in plastic, hopefully it’s good when it comes
@Shane.Snowhill cool, you probably got it for a good price too.
@@MartinRacingChannel Yeah i got it for like $450 it’s also on sale for labor day right now but the $300 shipping is what sucks lol, also is the graphics just stickers? if i take them off i think just black and white would look really good
@Shane.Snowhill Yeah, the shipping is tough. I wish they would let you pick them up, but it is very quick. The graphics are just stickers. The ktm 50sx graphics fit really close. You can take the stock graphics and use them to trim the others to make it fit perfectly.