Making a seat for my dirtbike! (DIY Comfort Mod)

Поделиться
HTML-код
  • Опубликовано: 29 июн 2024
  • The X-Pro Storm 125cc Dirtbike gets a much needed Upgrade in Comfort. The guts racing ktm 50sx tall seat helped tremendously, but was still a little too narrow for an adult rider and the cushion thins out towards the end of the seat. So what's better than one guts racing seat (2) 😁 Check out today's video to see what idea I came up with to make the bike more comfortable. Thanks for watching! Make sure to leave a like, drop a comment, and subscribe if you would like to see more content like this in the future.
    If you are interested in the X-Pro Storm or any of the upgrades I have on my bike you can purchase them from these links. I am affiliated with Amazon and Ebay and make commission off of the links below.
    You can buy the NEW 2023 X-Pro Storm 125cc dirt bike from
    amzn.to/3sYLss3
    or
    www.powersportsmax.com/produc...
    (Parts installed)
    Nibbi Carburetor
    amzn.to/3l7lheL
    Nibbi Foam Air Filter
    amzn.to/3yro4lZ
    Nibbi High Flow Black Air Filter
    amzn.to/4314utL
    Pro Taper Xr-50 bend Handlebars
    amzn.to/3vy9pEo
    Pro Taper Pillow top grips
    amzn.to/3Z4pL4Y
    ODI Dbk fifty handlebars
    www.odigrips.com/products/mx-...
    ODI rogue mx single ply grips
    www.odigrips.com/products/rog...
    Rk racing chain
    amzn.to/3HqKOqD
    Uni filter
    amzn.to/3H8MFQn
    Rear Shock Upgrade
    amzn.to/3R6YtHz
    Maxima Fork Oil
    amzn.to/3j3DqJn
    Guts Racing KTM 50sx 2016-2023 Tall Soft Seat Foam with Gripper Seat Cover
    Replacement Spokes
    ebay.us/rma3Xc
    amzn.to/3MNQjTs Motion Pro Lite Loc
    amzn.to/49SunRl IRC Tire Tubes
    ebay.us/N4XuDJ Dunlop MX 34 Tires
    TBPARTS.com 141cc racing engine kit with 78mm cylinder and 32 tooth cam sprocket.
    Thank you GO PRO, ODI, TBPARTS, LEATT, TBOLTUSA, NIBBI RACING, FASTER MINIS and BIKEGRAPHIX for sponsoring us and helping the channel continue to make videos.
  • КиноКино

Комментарии • 22

  • @philsadler7087
    @philsadler7087 2 дня назад +1

    I bought my daughter the x-29 110cc and it has the same size seat and it hurts the hell out of my ass because its too narrow. Thanks for the video!

  • @colbymartin1131
    @colbymartin1131 Месяц назад +2

    Looks good!🔥🔥

    • @MartinRacingChannel
      @MartinRacingChannel  Месяц назад +1

      Thank you, man! It's way more comfortable than what we had from the factory. This bike has come a long way. Once you're healed up all the way, you'll have to take it on the track.

  • @Cruizerdoesit
    @Cruizerdoesit Месяц назад +1

    I liked how the seat looked before better but i bet the functionality is better

    • @MartinRacingChannel
      @MartinRacingChannel  Месяц назад +1

      Definitely feels a lot better the guts racing tall seat foam and gripper cover looks the best. The feel of this one for an adult is much better. For a younger adult or kid the ktm50sx tall seat kit from guts is the way to go.

    • @Cruizerdoesit
      @Cruizerdoesit Месяц назад

      @@MartinRacingChannel got ya

  • @coreyfuchs730
    @coreyfuchs730 Месяц назад +2

    Came out great😂

    • @MartinRacingChannel
      @MartinRacingChannel  Месяц назад +2

      Thanks, I would have liked to have kept a lower profile, but the seat length is so short and the width is so narrow that this was the only option I was able to make work with what I had. The bike feels way better now that's what matters😏

    • @coreyfuchs730
      @coreyfuchs730 Месяц назад +1

      @@MartinRacingChannel 🦾🔥💪💣💯

  • @jeraldbogues5596
    @jeraldbogues5596 Месяц назад +1

    It basically 50/50 like can hurt by little bit

  • @jacarionrogers
    @jacarionrogers Месяц назад +2

    That look better, see you tmr ❤️‍🩹.

    • @MartinRacingChannel
      @MartinRacingChannel  Месяц назад +1

      Thanks man! Definitely feels better riding. See you tomorrow😏

  • @smenginemech
    @smenginemech Месяц назад +2

    NICE JOB THATS LOOKS GRAET

    • @MartinRacingChannel
      @MartinRacingChannel  Месяц назад +1

      Thanks very much! It took a little more work than I wanted it to, but it was definitely worth it.😁
      The bike is way more comfortable compared to stock or the aftermarket seat.

    • @smenginemech
      @smenginemech Месяц назад +1

      @@MartinRacingChannel it sure looks like it my original seat is just bad

    • @MartinRacingChannel
      @MartinRacingChannel  Месяц назад +1

      @smenginemech I understand that, i had to make a change. It's scary cutting up your seat foam at first, but it's Awesome when you follow through with an idea and it turns out nice.

    • @smenginemech
      @smenginemech Месяц назад +1

      @@MartinRacingChannel yes definitely

  • @Thepreppersbunkeroutdoors
    @Thepreppersbunkeroutdoors День назад +1

    Ill be checking out these seats!
    My ice bear whip 125 came in. 12/ 14 wheels was in the description but its a 14/17. I really wanted a 12/ 14.
    Anyways, my bike came with a 26mm carb- do you think it would need a 26mm nibbi because of this? Or would you stick with a 22 or 24?
    Apparently the ice bear/ syx has a large valve head and the compression is a LOT higher than i expected!

    • @MartinRacingChannel
      @MartinRacingChannel  День назад

      You probably could get a set from Amazon or Ebay cheap.
      I believe mine did too. The carburetors are different styles. I'd stick with the 22mm nibbi. The 24mm nibbi was too big for a stock 125cc engine.
      ruclips.net/video/gdQr3prm9D0/видео.html

    • @MartinRacingChannel
      @MartinRacingChannel  День назад

      ruclips.net/video/9Bh-WyGMCYg/видео.html

    • @Thepreppersbunkeroutdoors
      @Thepreppersbunkeroutdoors День назад +1

      @MartinRacingChannel yeah I watched that whole video! It is a great video! I'll go with the 22mm and I'll use yalls link if you have one 💪🏻

    • @MartinRacingChannel
      @MartinRacingChannel  День назад +1

      @Thepreppersbunkeroutdoors That's Awesome thank you!