Throttle cable installation for mini bikes and motorized bicycles
HTML-код
- Опубликовано: 9 окт 2020
- We'll show you how to modify your throttle cable to work with the twist throttle and carburetor combination you are using with your mini bike, motorized bike or even a motorcycle. Obviously if you purchase a cable for your specific bike you will not need the information in this video but if you are buying universal throttle parts and need help getting them to work this video may have some information to help.
Parts used in this video from www.afforablegokarts.com
Twist throttle assembly p/n 12120 affordablegokarts.com/product...
Throttle cable p/n 10570
affordablegokarts.com/product...
Cable fitting p/n 16430
affordablegokarts.com/product...
PZ19 carburetor p/n 10590
affordablegokarts.com/product... - Авто/Мото
After seeing this video I am ready to add my new thumb throttle to my motorized bicycle. Custom throttle cables made easy! Thank you!
Glad it helped!
Very detailed and very grateful for your time and video!
Amazing job keep it up
Ahhhh.......So THAT'S how it's done ! 😀 Thanks
Can you tell me what is the throttle grip. Both grips with the "kits," broke because they are plastic.
Still not coming out and I don't want to mess up my new throttle. Is there another way to do the cable
thank you
Safe to assume you needed a "4 inch cable moving length"? 3" on the carb side and 1" on the throttle side?
I’m not sure if I installed mine properly. When I twist I goes back to its original position but it doesn’t twist much.
Bought a chinese made gas bike kit and installed it. The only problem is that it came with a bad voltage regulator lol. might just go get a brand new throttle stick and carb now............
Yanni called. He wants his music back.
Flywheels??
💯
How on earth do I take of the cap from the elbow
If you're talking about the black rubber cap on top of the carb, you just pull it off. Give it a little twisting motion as you pull.
Can I cut the cable and repair the cable. And is there a wire clamps I can buy
We sell a cable fitting (p/n 16430) that works on the carb side of the cable.
my bikes housing came broken but the twist throttle is fine just the part that protects the cable. should i buy i new one or will this do for now
If you're planning to use it just be sure the throttle returns to the completely closed position and it doesn't get hung up.
give yourself a shake son, wake up, get into gear and sort that yourself, would I ask you if I should wipe my bum or will it do for now, are you seeing what I'm saying. . l0l. . I'm having your life mate,
are the cable ferrules commonly available for 19mm carbs?
We sell them on our website: affordablegokarts.com/search?q=cable+fitting
What type of solder and flux did you use ? Thanks!
We used BernzOmatic products. Water soluble lead free flux and silver bearing solid wire solder.
@@agkracing140 awesome ty
I got a question does that throttle work on a 1984 Kawasaki 2 stoke
Don't know if it will work on the Kawi.
no, it will blow up as soon as you open the throttle past 1/2 way, you plonker,
Cable too short now, I can’t twist more than 1/4 now
If the cable is too short you can cut back some of the outer housing which will allow more cable to stick out.
How the heck does the wheel come off of the metal throttle part
hey my bruva! i just upgraded my throttle & carb! i got the metal throttle! all is good! just a question id like 2 know the answer 4 please! those metal throttles where the throttle cable screws into the actual throttle theres a "ALLEN KEY HEAD LITTLE BOLT" just next to it.... WHAT THE FUCK IS THAT LITTLE FUCKN BOLT MADE 2 DO? or is it legit 4 show? 🤣🤣🤦🤦 cheers
Hmm I usually eyeball it. Lol
Your not showing how to remove the wheel in the throttle. Help.
Just remove the screw that goes through the wheel and remove it. Sometimes it doesn't want to pop out very easily so we'll gently persuade it with a screwdriver being careful not to scratch or damage the wheel.
Hello yes it's me again. And my wheel still don't come out. Is there another way to put the cable on
all this nonsense wasnt needed, cut the other end off measure the outer and trim close to the hole with the wheel in
If you cut the other end off you'll have to solder on a new barrel to fit inside the twist throttle assembly. Either way you're cutting, measuring and soldering.