1978 Bronco Liftgate Window Electricals

Поделиться
HTML-код
  • Опубликовано: 26 апр 2024
  • Rear liftgate window wasn't working from the dash switch or with the key at the liftgate, I start at the begin of the circuit, and test every component in the section of the rear window wire harness to find the problem. #electricalrepair #wiringrepairs #fordelectricalrepair #bronco
    Jamieson's Repair Shop - Fixing things...because that's what I do!
    @J_R_shop
  • Авто/МотоАвто/Мото

Комментарии • 13

  • @edmiller3442
    @edmiller3442 4 часа назад

    Thank you for this video. My rear window is working perfectly now. Bad breaker and a couple bad factory connections. Thanks again!

  • @walterjoncas12
    @walterjoncas12 2 месяца назад

    Thanks Alvin. Good wiring exercise. Chasing electrical issues can be frustrating at times. But no blue air in the shop like the previous caddy job....walt

    • @J_R_Shop
      @J_R_Shop  2 месяца назад

      Thanks Walt, this project was a little more fun to do, it's always nice to get to know how these things work. 😊

  • @SierraJohn
    @SierraJohn 2 месяца назад

    Nice job tracing the issue. It's always in the last place I look. If I could only start with the last place I'd save a lot of time.

    • @J_R_Shop
      @J_R_Shop  2 месяца назад

      Lol... isn't that always how it goes., just like there is always one bolt/screw that won't come out.

  • @joernone
    @joernone 2 месяца назад

    Alvin,
    I noticed a huge problem under the dash. Unlike our T-Birds, there's 4000 bundles of wire missing. You best get to finding them, my friend. Meanwhile, good fix!
    Regards,
    John

    • @J_R_Shop
      @J_R_Shop  2 месяца назад

      Hey John,
      Yes...a lot less complex than the T-bird, but there are still those pesky vacuum hoses! Lol

  • @Exit45Restorations
    @Exit45Restorations 2 месяца назад

    I agree with everyone else. Great example of how to chase wires until you find the issue. And it was a small problem as it usually is.

    • @J_R_Shop
      @J_R_Shop  2 месяца назад +1

      Thanks Matt, this was a good basic circuit to show as an example. 😊

  • @servicetechnician3264
    @servicetechnician3264 2 месяца назад

    Hello Alvin. Excellent troubleshooting. I thought you would find one of the switches corroded. That set up is very simular to my 65/66 Mercury Colony Park. Is there a safety switch to prevent the window operation when the tailgate is down in the Bronco? I also am looking for a new weather seal for my tailgate, maybe the Bronco is simular. I'll have to look into that.
    George B

    • @J_R_Shop
      @J_R_Shop  2 месяца назад

      Hi George,
      They are very much the same, and you are correct, that limit switch also prevents use of the window while the gate is open/down.

  • @dougabbott8261
    @dougabbott8261 2 месяца назад

    That corrosion in the connectors can drive a person crazy. Nice trouble shooting.
    What about using dielectric grease in those connections? Does that stuff work ?
    Thx

    • @J_R_Shop
      @J_R_Shop  2 месяца назад +1

      Thank you Doug, dielectric grease works very well, a little goes a long way to keeping moisture out on those sealed plugs.