We build a 100cc Motorbeast!
HTML-код
- Опубликовано: 20 апр 2023
- You and I hang out in the Brap Cave and build a gold-trimmed 100cc monster! Check out this motor bike package here!! www.motoredlife.com/products/...
Parts List:
Frame - Zeda Dawn v2 bit.ly/BEZedaDawnV2
Engine - Zeda100MAX 80cc/100cc 2 stroke bit.ly/BEZeda100Max
Exhaust - Gold ZDX65 bit.ly/BEZDX65Exhaust
Accents - Duct Tape Mirror Gold Crafting Tape No.285279
Ultimate Motor bike parts list - bit.ly/MBPartsList Авто/Мото
Beautiful frame, Great New Re-Done YD100 Great build w/disc front and rear, A very highly sought after setup for all to buy! It has taken some years now for it to be done right but finally a Real Setup can now be purchased, Great Video As Always Alex 👍
I put a Predator 212 in my Giant frame, Honda 10 amp charging coils, a 7" Harley led headlight, bullet style led tail light with brake and turn signals, 14" riser bars, Rock Shock front end, with 4 piston hyd brake. Comet 30 trans, and a 6 spoke mag wheel in the back, with 2 canvas saddlebags slung over the back rest. A 2 gal gas tank sits on the crossbar, With some flowing, jetting, big air, and smooth exhaust, the engine produces about 10 or 12 hp, which gets me over 70 mph, but I keep the throttle stop screw set at 80 kph, which keeps the rpm's under 5,000. I can pick up the front wheel almost effortlessly from a stop, and it rides like my old 76 shovel head Harley. If you want a more serious ride, I highly recommend the Monster 90, 78.5cc 4 stroke engine, using a Comet 20 trans, and Go Power Sports Juggernaut clutch. You won't need to modify the frame to fit the Monster engine, but you do if you use the Predator. These engines will outlast those China Doll 2 strokes, 10 times, or more. I've been riding mine over 7 years, and it runs like new. I think it will probably outlast me, as I'm 70, blind, and deaf. Wish me luck.
Love the brapp cage. I just got the gold rear gas tank today and I’m ordering the gold pipe to match. They have improved the spoke wheels I’m so happy with mine.
Wax on,wax off
Gas on,gas off
Just starting out in motor bikes my 1st absolutely awesome on my second, thanks for the old forks truing set up, great idea & free, & I have all the materials 😂
What an awsome bike bro. Looks real nice. Sounds good too.
Nice build good to see you still at it been around building these bikes since 09
Just picked up that motor. It looks good, and I can't wait to get it on a bike! Thanks for the build plus ride, brother! Good work! 👍 ❤❤
where can i get the motor? cant find it.
@@tannerthuemmler7132 It has that darned g4 style cylinder they wreck rings after 6 months like clock work
@@catsbyondrepair some Chinese garbage isn't it ? Wouldn't bother
I dig these kinds of videos
Beautiful build!! A+ love the gas tank.
Awesome built my friend!!
What's up love watching you build bikes I am wanting to build me one I'm from bogalusa Louisiana
The little edge on the tape is going to shredd your shock seals
Always nice to see you post
Hey Alex you should do the gas cap and gold.
Hey Alex from the czech republic. I purchased the 100 max cylinder to upgrade my yd100 to a 2 piece. Cool cool bike man
How did it work out? Hi from America
@@chadhunt6596 it's not here yet😁 it'll come in 14 days, I'll make a video on it sometime
It's not a upgrade the open transfers wreck rings
@@catsbyondrepair did it break on you?
How did it work out?
Gold tape the outside edge of wheel rims be the finishing touch.
Alex send me that frame to Portugal! beautiful bike buddy
Love the truing stand! Thanks for the idea!
Nice bike! Just love your truing “stand”! So simple!
I own Schwartz 15 speed limits bicycle I purchased from Walmart 25 years ago
Nice ride Alex
Nice builds bro, u help me out a lot with your vids, keep it going bro 👍👍, I got the varka scooter cause of your vid on it, that thing is fast, did not even get to 3rd gear yet, lol 😅😅,
Volume level all over the place! Nice looking bike!
Looks great. Just one thing, take off those
silly reflectors on the rims. Would look
cooler without them. Bike sounded great too. I'm going to smash the like button.
Also they throw the wheel out of balance
Legally you have to run reflectors
@@catsbyondrepair There are better reflectors out there.
that bike is sweet . nice color combo .👍
You are awesome!!
Hi Alex, very nice bike! You know what would give the bike that extra special something... Paint a long, horizontal, tear drop shape, gold colored decal or stripe along both sides of the blue colored gas tank. Start with the round part of the tear drop shape at the front part of the tank...👍
Love the bump start! Takes me back
built 2 motorized bikes, FUN to build! But rear bearings gave out even when I packed them with grease
A lot of the time it’s not the bearings “giving out” , but I find the bolts move a lot with coaster brakes
@@cameronbernhardy8357 non coaster brakes
You over tightened them
Same
Love the blue and gold color combo looks great…
In the South we call those pipes leg burners. Why put it there where you are destined to get burned?
Do you guys recommend using an expansion chamber during break in? Is there any harm in the longevity of the engine?
i did
expansion chamber is good for the bike
While I love your "mods,and builds",I asked for all of us who can barely add to our bikes>Look at my next post here.We can't spend $5-600 for a frame.We have a bike,like You started with.Please remember us and Do videoes for Us too.TY.
I still ride my Cranbrook everyday. Want me to record while I go on adventures to the store?
Se ve muy bien! Pero en realidad es un dolor de cabeza! Vas a estar más tiempo arreglando todo los tornillos que se afloja con la vibración del motor que manejando!
this looks cool
Very nice colors. Great bike. Please tell me how did you filmed it? Some special bracket? I would like to film my ride too
That's going to look Great
Kickstand with the gold tape and forks are impressive.
I didn't see the wheel set do they come with the frame?
I cant wait! Watching this in anticipation of my brapmobile .( Its adam from PA)
I’m working in my shop now and listening to you building your bike while I’m working on a $200.00 budget motorized bike
best thing ive done is get a $180 rockshox 30 Silver TK and a $80 SR Suntour SP12 NCX seat post . i run my cables/wiring in expandable cable sleeves and use a $13 bmx hallow stem bolt to run the front brake cable threw the stem . clone vm18 mikuni carburetor with a k&n type filter is a must have to get those motors tuned right and nice
Bad ass bike bro.
I would definitely use an offset intake or use some heat wrap on the pipe as the pipe being that close to the fuel line would make me nervous. And cold fuel makes more power.
Which of the 3 engines would you suggest for long term use? Zada 80, Phantom 85, or the new Zada100 max? I'm 155lbs, travel 38 miles round trip at 24mph once or twice a week pulling a trailer to haul groceries, water, propane, gas with a couple small hills, about 400ft long. Presently running a BBR Stage 4 with a MZ 65 clone and OZ reed valve. Thinking l want a bit more torque to run a 36t and still maintain 25mph. What would suggest? My bike is a GX7 Genesis 29r
In my opinion the yd100 has been the best. I got over 2,000 miles out of built engine
That gold pipe nice the frame paint that blue killer
how fast will that 100c engine go?
Alex? The alex that helped me out sooo much with the mags?
Bueatiful! Sound great.
Happy to subscribe
Nice 👍 build.. I built a few 2ts had my custom redone phatmoto 4t for a few years but now if I'm going to push the legal limits of what is a bicycle I'm sticking with my sur-ron LBX all that noise I forgot how loud these things are lol I have the 125cc 2t power on a silent platform that I can wheelie and jump 🦘❤ and so far almost 5,000 miles and cops leave me alone for the must part been pulled for rolling a stop sign changing lanes without a signal but nothing was said about the bike itself.
A yd 100 has plenty of power stock
I just ordered the same bike , I was wondering what size handlebars can I use , I want bmx or ape hangers do you have Any links for other handlebars that will fit this stem?
I'm also Working on a good handful bikes modifying them
Looks very cool, hut that 2 stroke corn popper sound drives me nuts... a 4 stroke would be very nice....
This 🔥🔥🔥
good job 👍👍👍👍 from ja
Hey alex how fast should I run a yd 100 100cc during break in because it at a slow speed it jurky.
Sounds so much better than any motor bicycle I've herd.
Nice bike,I have one very similar
that frame is electric colorwise anyone who couldn't see it shouldn't be driving
Driving or riding - perhaps you shouldn't be typing. Whoops, I'm an asshole.
@@simsum1argh882 lol its ok
Don't forget to get your covid booster
Beautiful bike Alex! You know how to Build them Crispy 😊... Awesome 👍
That tape is gonna kill the seals on the forks
Whats up guy I have the same engine I can't get it to idle
Turn it into a trike and hopefully had a Honda a Honda 125 or 110cc or a smaller scooter engine like from Honda ruckus Or Honda zoomer engine
From Somerset KY
U should put a jackshaft with a derailleur on it
Yo bro what size is your rim and your fork is it 26ER?
Love from ireland
Can you do a SICK Phantom build?
💯👍👍👍👍 it wood be better if you added a pull start on the engine kit
i love this projects , why not a 49cc? more cheap and silence? or 4 stroke motor for garden motor?
Do you like this engine more then the Phantom v3?
Looks very good except for that chain too tight we're out the bearing on the engine and the will. And it's geared for 120 mph😊
How’s the vibration on this thing?
I've been seriously looking at that bike but how are the forks are they strong??
Cool ❤❤❤
I’m looking to buy this exact one on your website! Can you get it delivered assembled?
I have a Schwinn stingray I've been wanting to go motorized with just can't decide what engine size to go with
I like the way the bike is made but you want to fast thrue the way that you did so it should have been done in 2-3 segments other than that fantastic bike.
Did you think about MCU-powered ignition system, like for example Sparkduino?
What frame is that m8 , I'm stuck in blighty,,, just asking ta
From North Carolina does that max 100 have 10mm or 12mm pin
Beast? Bmb.
Dam your first ride kinda discouraged me from trying something other than my 4 stroke builds.
How did the gold color hold up on the exhaust ?
Is it possible to add ape hangers ??
I find the engines that have those 6 dots on the bore tend to be the best engines.
Hi you seem knowledgeable about this if I have any questions can I ask you questions
I'm from Goderich Ontario
I think this will be my next build. Are the frames on Amazon any good?
The triple fork tube does not line up in the top.and need up a little the gas
Sounds just like an old 70’s Suzuki RM… Nice….
That is very cool and that bicycle go very fast like motorcycle God bless you 🙏 rock on 🤘
You wrecked your forks
Very cool! Would it be able to create a side car for a dog?
What bike frame is that
That gas line is dangerously close to the exhaust. You need an offset intake
I'd get an angled petcock before intake. Those intakes rooob power
Wondering if it's possible to put a 100cc motor on a Himiway Zebra ebike?