Harley Davidson Dropped Without A Scratch! Motorcycle Drop Guards Saved The Day!
HTML-код
- Опубликовано: 11 июл 2024
- Motorcycle Drop Guards
Save 30% Using Code HDVIBE2024 at checkout
motorcycledropguards.com
TCMT Saddlebag Guards Link
Save 5% Using Code HDVIBE5 at checkout
shrsl.com/42vhz
In this video, I show you some Harley Davidson Dropped but No Damage and they all have Motorcycle Drop Guards installed. Drops Happen, but Damage does not have to happen. Protect your Harley Davidson from drops by adding motorcycle drop guards. A dropped Harley Davidson motorcycle brings chills to the the spine, but, with motorcycle drop guards your Harley Davidson being dropped will protect it from damage. @motorofficertraining
Chapters
00:00 Harley Drops
00:47 No Damage
02:24 What you Get
03:09 Motorcycle Drop Guards
04:05 How to Install
10:22 Save 30%
11:10 Like, Share, Comment and Subscribe
#harleydavidson #roadglide #streetglide #motorcycledropguards 
Авто/Мото
Dropped without a scratch...motorcycle drop guards save the day! Check out this week's video and learn more about Motorcycle Drop Guards, how to install them and watch until the end to get the exclusive HDVIBE discount code to save 30%.
Please like, share, comment and subscribe to the channel. If you are a new subscriber, please leave a comment below stating New Subscriber so I can reach out and thank you for supporting the channel.
Ride safe and without fear of dropping your motorcycle.
Thanks for your support and ride safe.
Rick
HDVIBE
Been eyeing these for at least a year but 30% off had to do it now! Just completed the order! Thanks for the content and code!
Thanks Paul for watching and commenting. At 30% off, it I'd a great value for peace of mind. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
What a great idea and thank you for supporting small business.
Thanks Scott for watching and commenting. I appreciate your continued support to the channel. Jay appreciates all that support his small business as well. Ride safe and enjoy. 👍✌️👊
Great product,need order set for my road glide,thanks rick👍👍
Thanks Darrell for watching and commenting. I appreciate your continued support to the channel. Ride safe and enjoy. 👊✌️👍
Great video and looks like good product Rick, thanks for sharing
Thanks Bob for watching and commenting. You need to get a set for that fancy new road glide. Ride safe and enjoy. 👊✌️👍
That's a great discount code for your viewers! Great job showcasing the install.
Thanks Eric for watching and commenting. I appreciate your support. Ride safe and enjoy. 👍✌️👊
Just purchased mine. They were out of stock the last time I looked for them. I very much appreciate the code for 30% off.
Thanks for watching and commenting. I'm glad you were able to use the code and save 30%. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊
Darn right I’m purchasing those! Thanks!
Thanks Dennis for watching and commenting. Definitely a good choice to protect your bike. Don't forget to use the HDVIBE2024 code at checkout to SAVE 30%. Ride safe, train hard, and enjoy. 👊✌️👍
Wow. What a great way to protect our bikes. Thanks Rick! Great video!
Thanks Bob for watching and commenting. I appreciate your support to the channel. Ride safe and enjoy. 👊✌️👍
Just ordered, thanks Rick for the discount code, no more excuses for not practicing!
Thanks Jeff for watching and I'm glad you got the code to save the 30%. Like you mentioned...now practice,practice, practice with no fear. Thanks for your continued support to the channel. Ride safe and enjoy. 👊✌️👍
I like the idea 👍🏼 I have to check how they work with my 2021 CVO RoadGlide with foot pegs. It has the chopped guard as well.
Thanks for watching and commenting. You can install them with highway pegs as well on the front engine guards. You may need to edge the highway pegs up just a bit to get the drop guards also on the bar. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊
These are definitely on my get soon list. I want to practice more slow speed maneuvering and know I will drop the bike doing so. Thanks for the video.
Thanks Mike for watching and commenting. We have some fun slow speed practice planned for April 20th. Ride safe and enjoy. 👊✌️👍
Adding drop guards to your bike is worth it even if you don't practice slow speed motorcycle skills. Great video 🤘🤘🤘
Thanks for watching and commenting. Much appreciated. Ride safe and enjoy. 👊✌️👍
I have a 21 Ultra Limited and purchased them when I purchased my bike. I highly recommend them.
Thanks Robert for watching and providing your perspective and input on the topic. I appreciate your support to the channel. Ride safe and enjoy. 👊✌️👍
Great Video - really helped! Question - the bolts can just be hand tightened and don't need to be torqued?
Thanks for watching and commenting. There is no specific torque spec for the bolts. I just tightened them down with the Allen and wrench and check them from time to time. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍
They make plastic ones for like $ 20 for black bikes formed to the bars
Pro guards on Amazon
Thanks for watching and commenting. I have used those as well...they work well to a point. Then at some point the plastic wears down to the bars causing damage to the crash bar or saddlebag guards. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍
Great video and discount, folks who don’t have should jump on it 💯👍
Thanks for watching and for the comment. I appreciate your support. Ride safe and enjoy. 👊✌️👍
@@HDVIBE 🤙
If you ride a bagger and if you practice slow maneuver riding, which we all should, a drop is bound to happen sooner or later. The drop guards were the first accessory I put on my 17 CVO Ultra. Yes, my drop guards have scratches on them because I like to practice. Keep it loaded guys!
Thanks for watching and providing some great perspective on the topic. It's all about practice and if you are pushing your limits to improve...you will drop the bike. 👊✌️👍
my 05 ultraclassic came with bag guards and lower fairing guards. dropped my bike 3 times already. once, it just got tired and decided to fall over while dismounting.
Thanks for watching and commenting and sharing your input on the topic. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
I'm curious. I've seen many videos on these, but one with the stock stretched HD bags that come on the specials and cvo bike. Will these prevent the stretched bags from damage as well?
Thanks for watching and commenting. I put them on the CVO that has stretched stock HD bags with saddlebag guards. The combination will protect the stretched Special and CVO bags. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊
That is the first part I placed on my bike. They work well. I noticed you had a gap on the first one you mounted. It looked way too high on the crash bar. By the way Jay the owner will contact you directly if you have a question. Too notch customer service.
Thanks for watching and offering your thoughts on the topic. I actually needed to slide the front one up just a little. I speak with Jay almost weekly and he saw it was just a bit low. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
@@HDVIBEI’m a subscriber. I think your videos are really informative and entertaining. What do you think about the new cvo and standard models?
@troncoparati Thank you. I had the opportunity to ride a 2024 Road Glide. Overall, it was very impressive. The 117 seems quicker than the 117 I have on my CVO and ST. I think the ride modes make a big difference. I rode it in sport mode and throttle response is immediate. I did sit on the CVO ST...the stance is different than the standard and the floor boards are not good in my opinion. They are very small and they have a lot of play in them. The standards bars are much improved over my 2021 RG, however, the bushing in the triple tree is very soft...as such the bars move a bit when you push forward or pull back on them. More to come as I have the opportunity to get more seat time on the 2024s. 👊✌️👍
Sir,
Thanks again for the find! Just installed the set on my bike. Great product and informative video!
@charleshuffnagle4807 That is good to hear. Hopefully you took advantage of the HDVIBE2024 discount code. It is an awesome product that takes the fear of dropping out of the equation. Ride safe, train hard, and enjoy. 👊✌️👍
Front location is right where my highway pegs are mounted.
Thanks for watching and commenting. I assume you have chopped engine guards? If so, it is difficult to have bar mounted highway pegs with the drop guards. If you like highway pegs and want to add drop guards, frame mounted highway pegs from under the floorboards work best. If you have the full size engine guard, no problem mounting the drop guards and highway pegs. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
Will these work on thicker rear aftermarket guards?
Thanks for watching and commenting. The drop guards are designed to fit on the standard size harley front crash guards and saddlebag guards. The rear drop guards will not fit thicker saddlebag guards. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
I'm assuming these are for use without highway pegs?
Thanks for watching and commenting. You can use the drop guards with highway pegs on the full size crash bars. It gets a bit more challenging with the chopped crash bar. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
Do they not just lessen the already poor lean angle?
Thanks for watching and commenting. I do no believe your crash bars lessen lean angle so these would not lessen lean angle. Your floor boards the floor boards will hit the ground before any crash guards or the drop guards. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️
Hi there, where can I get these, I have looked everywhere man?
Go to the link in the video description. It will take you direct to the website. Then use Code HDVIBE2024 at check out to save 30%
motorcycledropguards.com
Thanks for watching and ride safe.
Thanks Rick.
@MightyMick88 You are welcome.
i drop my bike often, obviously not at speed, but at low speed practice. if you dont drop your bike, you will never learn how to ride with a high level of skills. i ended up putting plates under my bags to act as a hard skid surface. no point in dumping money into a super custom build that you know will be dropped... same reason i left my wifes classic camaro in primer and just vynil wrap it, no reason to put a $15k paint job on a car she will drive daily, 1 rock chip and 15k is a complete waste. 1 door ding, 1 bug at 70mph.... just wrap it, more durable, a fraction of the cost and easily changed color.
Thanks for watching and providing your perspective on the topic. I appreciate your input. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
@@HDVIBE of course. I figure out the damage mitigation when I lost my first toy. ( I started on slant bikes, it only took on drop to figure out that slant bikes get totaled wit one little scratch but a harley can have thousands in damage and they tend to hold value....) if you want to ride it, don't put more money in than you can afford to loose. Those stretched bags look good, but are more expensive to make look pretty again. You have great content keep up the great work.
Thank you again for the support and the very kind words. Much appreciated. 👊✌️👍
I bought split shaft collars for $10 each that do exactly the same thing. Less weight too, but they do not look as nice as those.
Thanks for watching and commenting. I have heard of people using that method. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
I used collars at 1 point but they damaged my bike. The collars dont fit the bars correctly and do not have rubber gaskets to protect the chrome. We had to cut the rear ones off which ended up burning the chrome bars. I would not recommend using those if you train a lot but even if you dont they look cheap on the bike as opposed to the drop guards which look factory.
@MikeBrown-zg5ne great point. 👍
@@MikeBrown-zg5ne Have never damaged mine and it has gone down several times. I just wrap couple winds of silicone tape under them. Work like a charm. Yeah, they don't look great but they come off in 60 seconds for all 4 👍
@user-bk8db7ud6k 👍
I’m sorry but i’m not paying 400 dollars for this when that’s what I paid for a Santoro fab works crash bar that looks better to me And all you have to do is change the plastic or skater wheel tips out if you drop your bike. To each their own but this is a pass for me. Thanks for the video.
Thanks for watching and commenting. I understand your perspective given that you have invested in Santoro crash bars. Just to be clear for other viewers reading this comment, the Motorcycle Drop Guards are not $400. With the 30% discount code, they are less than the cost of the Harley Saddlebag Guard kit. Thanks for your support and ride safe. 👊✌️👍
Hi Mr. Potty pants, let's see you cop your same dirty diaper attitude when some got your bike out on a ride, &, they dropped it or the bike got plowed into by a reckless driver trashing your saddle-bags and forks! You won't be complaining about the $400 cost of those drop guards-actually you will because you didn't have them on your bike when it got plowed. Don't even bother to mouth off at me for this text, you won't get the satisfaction of any kind.
@@HDVIBEhey slick Rick, love those drop guards, always worth the price when take care of your ride! 🏍️😎🐻🤓Doug
@douglasradowick508 Thanks for watching and commenting. I appreciate your input and support to the channel. Ride safe and enjoy. 👊✌️👍
Rick, I love the Drop Guards because they look like they are part of the bike. i dont want 4 skateboard wheels sticking out on my 45K Harley. To each his own BUT dont forget your kneepads to match your skateboard look. SMDH! Plus the drop guards can be repaired for those of us who actually develop amd maintain our skills. Like Motorman Palladino says, dont be a doofus and duck walk your expensive Harley.
Makes no sense. Isn't the crash guard made for the same reason?
Thanks for watching and commenting. The drop guards are designed to protect the primary and guards from getting damaged in the case of a drop. The drop guards are much thicker than the crash guards so they will not wear through and when you take them off you will have no scratches or marring on the crash guards. It's another level of protection...especially for the primary housing. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
$300+ for rear HD guards in Canada, got mine, just need to get off my butt and install them... now to shut up and continue watching ;-)
Thanks for watching and commenting. I appreciate your continued support to the channel. Ride safe and enjoy. 👍✌️👊