How to Replace the Fuel Filter for Ford F-150 1997/2003

Поделиться
HTML-код
  • Опубликовано: 4 окт 2024

Комментарии • 5

  • @Mike-su8si
    @Mike-su8si 10 месяцев назад

    I need both those short lines. Their rotted on the inside so that tool wouldn't have worked if i had one the fuel filter nipples rotted out inside those line connectors
    So i just need 2 new short lines and a crimping tool im looking for those and not finding it. It doesn't need the whole long gas line

    • @LessExpensivefix
      @LessExpensivefix  10 месяцев назад +1

      Is very easy to change the fuel filter there is some stuff you have to do before they change the fuel filter remove the key from the car and open the gas cap to release the pressure from the gas tank and before that you have to go to the store AutoZone or Advance ask them for the fuel filter tools is cheap is not that expensive after that just plug the tools between the filter and the holes to release the clamp and be careful with the gas can go for your eyes always safety that's a glasses to stay away from gas

    • @Mike-su8si
      @Mike-su8si 10 месяцев назад

      @@LessExpensivefix there was no pressure the ends connected to the fuel filter was rotten and gas was leaking out each nipple end of the fuel filter is rotten and is rotten in the quick disconnect line
      So i have to replace the 2 blue flexible fuel lines and get a new fuel filter to
      I know its not hard taking off or putting on i just am having a hard time finding those 2 flexible quick disconnect lines and a crimping tool to crimp the new lines on so i can then hook up the fuel lines to the filter

    • @Mike-su8si
      @Mike-su8si 10 месяцев назад

      @@LessExpensivefix i really don't wanna use finger clamps and rubber gas lines so will cut off that old flexible line and take it in so they can match up what i need

    • @Mike-su8si
      @Mike-su8si 10 месяцев назад

      @@LessExpensivefix if mine was in that good of shape it sure would make my job alot easier to do but its not in good shape so I'll cut the rotten lines off and take them in
      That sisor tool would just break the rotted inside of that line connector that's how mine is well is in bad shape