M.B ESL diagnostics / Repair.
HTML-код
- Опубликовано: 15 июн 2022
- This video shows how simple it is to diagnose your M.B electronic steering lock and replace it with a bypass or a new unit.
These are very common for them to fail and will not allow the vehicle to turn on or start.
Contact me if you need any services related to keys or bypass modules at the instagram below.
Please support this channel by hitting the like , share and subscribe button !
Snapchat : mustafa-jh
Instagram: mustafajh
Tiktok - mustafa.jh
Email - Mustafajafarh@gmail.com Авто/Мото
Great solution
My car 2010 glk 350 had same issue .and fix it my self absolutely same method .
I did it . Thank you so much.no questions this video is perfect!!!!!
I'm an industry professional of 30 years and I now I work for a scan tool company as tech/sales support. This is one of the most thorough, useful presentations I have ever seen. Bravo sir! 👏🏻
Top man, had the same issue on my w204 C220 in 2011 got repaired by Mercedes cost £4000 car was 3 years old, now in 2021 same issue started again leaving me stranded in a cemetery. Managed to get it going again and realised it had something to do with me taking my key out. So I kept the key in at all times taking all the right precautions.. NOT ADVISED but it helped..I did this for 2 YEARS keeping it in my garage and didn't tell a soul not even my family. I did take it out for the odd run now and then but very cautious at all time when leaving it alone. I was quoted £950 to fix by a friend at a local Mercedes-Benz specialist. I considered it till I saw your RUclips video. I kept putting it off then shown a local garage the video two weeks ago he said he can do the job for £600. I finally plucked up the courage to have a go myself after watching it one more time and also replacing the little motor in the ESL for £7. Wasn't easy but wasn't too hard I enjoyed the challenge. Job done car up and running no issues what so ever. Total cost £53.49 for tools and esl motor. Massive thanks to this guy couldn't of done it without you bruv. Respect 👍
Im glad you found my video helpful and got it going for now , hopefully the repair lasts longer. If you need an emulator in the future , i can definitely beat the price you were quoted.
Probably the vampire's wanted your blood!
Hey, do you have a link for the motor, did you buy the screwdriver things for the pins? I got quoted £700 from mercedes dealer, shocked they charged you £4k!
That’s so weird? I had the same problem Mercedes only charged about $870. Wow, 4k was what they told me if I needed the knocking fix in the engine.
£4k !!! - that is outrageous , even for a Merc dealer. Mine is still functional at 128k miles but i am anticipating replacing it before it fails and my local Merc Indy quoted me £430 to replace as original
A brilliant video that provides 2 important lessons. The lock is reachable without dismantling the entire dash and the lock most probably has not totally failed so a light tap will probably give you another chance to get it to unlock. Well done. For those not wanting to use an emulator, remember that the lock motor can be replaced at minimum effort and cost.
Thank you.
Since my ESL failed on April 5, 2023 until today 06/30/2023 I have seen and read all kinds of information on the internet about this problem and believe me when I tell you that this is the only video on the entire web which is professionally explained simple and coherent and straight to the point with no BS. My question is: How do I get an emulator from you, Sir?
Thank you , you can contact me by email mustafajafarh@gmail.com
@@MuLife Ok I will right now. Thanks for the reply.
WATCH THIS VIDEO! Your presentation is the most thorough, complete, and fat free fix of what I've been chasing down in a friend's 05 clk320. Thank you!
Found a person to make the emulator and then changed it myself, I had a bit of luck the ESL failed in the unlock position took me a while to manage it but id did. Thank You so much your video saved me a ton of hassle a fair bit of money 👍👍👍.You rock man!
the best run down on youtube, detailed and spot on.
Thank you! This is the best video for M.B. ESL repair video !
Your the best of all the videos i have seen on the esl replacement very detailed video and explanation 👍 thanks for sharing
Seen few other videos,, by far you are the best. Great explanation.
Thank you Sean !
Awesome information , man god bless 👍
Wow this happened to my C300 and have watched a bunch of videos on it BUT this one is the best ... THANKS SO MUCH !!!
you are the MAN! thank you so much
Felicidades amigo un gran video ilustrativo y muy didactico ...
Saludos desde chile!!
Excellent video...thanks for sharing
Thank you man for helping us you are awesome. I'm so happy that i find this video .
Merci pour votre démonstration très utile pour les amateurs comme moi
Excellent video. Subscribing to your channel now. Keep posting more videos like the one.
Great great video mate and nice explanation. I have also done plenty of this to my customers without steering removal 😃😁💪👍
Brilliant, thanks mate.
Man this was excellent
Thank you for making this especially part 2 we all appreciated it i cant wait to send you my equipment i never understood why dont they sell a repair kit but after comments after comments it will just happen again
Your welcome , contact me by email if interested in proceeding with an emulator
How can I buy the esl
@@bartleysmith contact me by email in description
@bartleysmith you can't mercedes-benz won't sell you one but you can repair the inside but it will go out again and again go with this guy and get the mod. I went to 2 junk yards and get a replacement oit of the 8 card all where the same burn out
@@bartleysmith mercedes-benz states ot part of the anti theft system
Hi there. After the ESL are disconnected, can the key be removed from the EIS for the duration of the repairs on the ESl.......Mercedes c200 kompresser, 2007 model......thanks for the video
Wow, fantastic work!!!
Thank you
Hello,
Excellent video! ❤️How can I order an emulator preprogramed to work with my car?
Contact me at mustafajafarh@gmail.com
Thanks for your great video very useful.
And could be much more to show how you've read the data from the ELV anyway.
Quick question,
Is there an ELV on E200 2013 thank you very much.
Just opened mine No elv.
More updates,
I've added a key to E500 after successfully programmed spear EIS locked no sound of ELV turned out to be the f EIS.
Fixed by next locksmith.
Thank you great video
Tony UK
Good video, thanks. Question: I have a BMW e90 with ELV locked, it seems impossible to remove the lock without removing column which I haven't been able to do. I installed the emulator but steering is locked so the problem still exists. any suggestions? thanks.
My 2012 has no crank no start and the key fob will not come out? Do you have any ideas? The battery fully charged and it’s in park
Hello I would like to know what I need to do in order to get the emulator I have a bad esl I was able to get get my car started again by following your method by tapping the steering column I want to avoid ever having this issue again
Wow, great video for a DIY
Where are you located ?
do you need to program emulator to all models? i have seen someone put simulator or emulator with out programing, my point . if i need to program emulator how can i do in my back yard ? still i need the software that can not get easy
Is there anyway to have an emulator programmed without sending the failed one in and have it ready just encase the module fails while on a trip ?
Had this happen to my E350 2 days ago, I undid the steering column adjuster pull wheel in out up down a few times and got it working again, how long it lasts who knows. What I will say is I had loads of fault codes I had to clear, this probably can also be done by disconnecting battery for 15 mins.. hope this helps someone like this video does 👍
Basically what you did there was sort of tap the ESL to get it to work until it stops again.That is not a permanent fix but only temporary. Suggest you replace it now before it fails in the lock position.
EXCELLENT !!
Hey I have a question what about if no sound or dash lights pop up once you insert the key could still be the ESL?
Cus I’m having same issue car won’t start I even check my starter but is good. A month or 2 bk car didn’t want start I had a dangle left ,right the steering wheel and the car started this happen 2-3 times in morning , also no dash lights or sound had come up when car didn’t want start.
Yes they also fail completely without any sound. The fact you hit the wheel left and right , that causes the steering wheel module to get effected and hence it worked.
I have esl problems 2000 Mercedes clk320 how can I get in touch with you
Man I have 3 of them. 2014 c300, 07 c280 , c320. Learning my babies..
wow this is an excellent video..on a C250 the fob will open and close doors but steering is LOCKED..So car wont start 2012.. can u just relay (starter) as some youtube video show turn key to sec position remove 7.5 fuse and start the car like that ? Ive seen several videos on here with people doing that in the fuse box under hood thety jump the starter relay after removing 7.5 fuse for a few mins then car starts???
Do you have to program the new motor if that’s all it was
This is a great video with tons of valuable information. I had the same issue with my car and was able to unlock the steering wheel by tapping on it. I would like to have you guys remove the ESL and install the emulator. Where are you located. Is there a number I can call you guys?
Thank you for all the great info.
Thank you for the information.
So mine just got really loud today but still disengages. Could there be some internal damage I should look at right away?
Great video
Hello, great vid, I think this is my issue.
1. I have a 2017 Metris, they call it the “Metris Class” but all the Mercedes stuff seems to have a “W” then a 123# etc.
2. I can’t find a W # for my Metris, like if I wanted to order the actuator, I’m 50/50 liking the plug and pray option.
Tried eBay but I just don’t know what W to order.
3. You mentioned it’s easier or faster with key and starter, can you do a universal program for the ESL for my Metris?
Yes contact me for more information.
WhAt if you can hear the suction of the key and have power but no crank ?.?. I have that issue in my c300 2010 today.. I put the key it makes the noise like the key is inside. But when I turn it nothing everything has power. But ignition doesn’t start and I can’t even put it in neutral
I would start by checking the fuses. If all good get your EIS checked.
Awesome thanks 😊
He is 1000% right!
Boy you are good
Love that Skyline in the blue.
I have a friend who has a 2011 c300 that did the and stranded him in town. After he towed it to a shop . After trying to get the steering wheel to unlock which he did apparently it now has a fuse nuber 24 blowing in front sam unit no com ect . You ever seen this happen before thanks
very good bro ❤
Great video thank you very much!! I am having this issue with my car (2008 c350) where can i buy this emulator?
Please check description for contact information
I have a 98? C. LK320 and I lost the key? If I send you the Ignition and all that can you do the? The emulator with it and program all that how much would it run
Contact me at mustafajafarh@gmail.com with details , also send me a picture of the key style you had from google.
can i cut both the lock position bolt ? and the tangue sticking out so it wont lock anymore ?
No, even if you cut the tongue off, the lockout inside will still prevent the ESL from being removed from the column. You could possibly repair the ESL and not re-fit it to the steering column which makes it easily accessible if it failed again.
What is the black thing you plug in at the last on the video? Is it replace for the ESL and never unlock again?
That is the emulator that gets replaced instead of the electronic steering lock.
Contact me at mustafajafarh@gmail.com if you are interested for details.
Where can i tap with the hammer?
In the middle?
What kind of socket is the one u used for the steering colum bolts
CASlots Need 12 mm torx key(female) and 13 mm socket !
Are you in New Jersey I have that problem right now ?
If i manage to unlock the steering wheel. Do i leave the key in and remove the esl connector and module etc or do i unlock and then leave key in and disconnect battery?
If I wanted to send in my EIS, does it need to be the old one that I took off with the original key or could it be from a donor car with my original key? Thanks.
It has the be the original one from the vehicle.
Thank you!
Is it normal to have this problem and windows or sunroof dont open or close (steering not locked) ? Thanks! 🙌
If the ignition turns on ( have lights on cluster ) then it is not ESL
Hello,
Great video!
1. 6 months ago when it first have this problem. When I turn the key or use my push start button, no sounds what so ever, but dash cluster lights comes on.
Mechanic say it’s my EIS cost $1750 to replace. I never fixed it, because car starts and runs intermittently. It starts after a while when it stall.
2. Now, when it happens, no sounds, and no dash light clusters at all! But car still starts ups after a while, and check engine light disappeared.
What do you think? Is is my ESL only or both ESL and EIS. Can you give me some suggestions?
Hard to tell but most likely EIS was your issue at the beginning , but now it could be a combination.
you can send me your units for testing. contact me if interested.
Excellent video, are you in Canada or US?
I had no lights on my C300 - 2011 . Got a guy charging $350 to re program the ESL and $200 to install it back. Now the lights are On In Cluster
but car not starting, he is saying - The Starter motor is gone... ? Can that be true ?? because I drove it quiet a few times with relay by-pass method
Please assist.
How did you remove the OBD
NO fuel pressure and I’m getting a phone issue where it says the TELEcall SYSTEM not working ITLL crank
it will do everything
SAYING my roof is in the middle of being put up and put DOWN
there’s an SRS Restraint
And an SOS I feel like I just need to get the gas going
. Is there a bypass?
2006, SLK 350
I need to get the part and get it fixed how can i contact you and find out how to send it to you and how much
So I bought this car with no key for my daughter's 16th birthday and she is extremely excited about her first car is a Benz and that is cool but I need a price on what it will cost or if there is a easier way than sending it is
Great video! Very helpful. Do you only need the key to program the emulator, or do you need both key and ignition switch?
Will need the key and ignition switch. It can be done without the key but faster if available.
@@MuLife so when the ESL goes bad and I put my key in the key does not turn and the red light on the key flashes while the key is in the egnition. Is that the problem because I notice earlier on before the key quit turning it would sometimes turn and then sometimes it wouldn't now it does not work at all whats your oppion? So note when I put the key in and turn i notice that the the instead of the key flashing red it would aluminate green then start but when it don't want to turn and it stays in lock position the key flashes red
@@biggd9817 what was the issue
@@MindingmyBizzness it needed a new key which was $577 but thank God it wasn't nothing else. The last key would work occasionally and then it wouldn't start the car at all but the door locks trunk release work but after a while none of that worked. I checked the signal at an auto parts store and it said that the key was fine I changed the battery but it STI wouldnt start the car so i paid the money and it fired right up no more issues at all it runs like a dream. Thanks for being wing to help i do appreciate that.
@@biggd9817 did the wheel unlock when you put in old key or was it not responsive at all?
hey bro my esl lock just failed in the unlocked position. i was wondering if i can just take out the plug to the esl and plug into the emulator without needing to take out the esl
Is it possible for the connector to get disconnected from the ESL. I was working on parking break since then I have this issue. My problem I can't send car to u as I'm in Ireland 😂. Bit lucky I'm in unlock posistion
No there is no way it will be disconnected if no work was done under the steering column. it could be a coincidence that it failed at your shop. you can send me the ignition switch and key and i will program an emulator and ship it back ready to plug in.
Hello, I was just in a flash flood 3 weeks ago. Water did enter my intake but I can still turn engine by hand and all water was removed from engine and nothing entered cylinder area from what I can tell. I have replaced all can bus boards and replaced starter and still no crank no start and now have a parasitic drain in my battery any advice? This has caused me to loose my apartment as I am a Uber driver and can't work without my car please help any advice will help!
How do I get you to program the key with the emulator you showed in this video. I have a 2011 mercedes 350 sport. You did an excellent job and video was superb.
thank you for positive feedback , I will need your key and ignition switch sent out to me to be able to send you back a programmed emulator ready to plug and play. Contact me by email for details and pricing. Mustafajafarh@gmail.com
@@MuLife I will contact you later today. Thanks
Hello I have the same problem as you described for the Mercedes 300 C model with the steering locking mechanism . How can I get in contact with you in regards of getting this fixed or programming a new emulator thank you, Nick.
email me at mustafajafarh@gmail.com
I tried to email you, but it does not go through
@@nickmitrakos2160 make sure the email is entered correctly. I get constant emails through this videos with no issues
Where are you located, I am having that problem right now, with the unlock position, I would like to do the same thing you did, can you let me know what I need to send you to fix it, thank you
Canada , please send me an email. Contact details is in the description. Mustafajafarh@gmail.com
Where is your shop?
The Best
Can I program the ESL on a BENZ with a Autel 909 scan tool
No.
I have this issue but I don’t know how to get it to you or anyone other then the dealer to get fixed can you help
I should have said it’s on my 2011 c300 4 Matic
Thank you. This video was awesome. So if I send you a key I could buy an emulator plug and play? I’m in Japan and communication at local MB dealer might be a hassle if they will even program an emulator for me. I have a U.S. military address for USPS.
You are welcome , yes i will need you to send me your key and ignition switch for me to be able to program an emulator snd send them back ready to plug and play. Contact me by email in description for details.
@@MuLife Okay, thanks. Wow, ignition switch too. I’ll have to think about this more and consider all options.
Hi, Great Video.
I have a 2012 C300 and I’m having this issue. I removed the ESL and replaced the motor in it and still no luck. Still says remove key but no instrument cluster lights or anything. The car locks and unlocks with key fob.
Any suggestions? Thanks in advance
Brake light switch when u step on brake pedal a lil switch get compress
Its not always the motor that fails , best to get an emulator or replace the ESL.
Great Video, very informative, I am having that very same problem, how do I contact you if I need to program an emulator? Or if I buy a new ESL motor, does it need to be reprogram?
Raul , you can reach me at mustafajafarh@gmail.com for pricings and details
My mothers Mercedes C300 is having the same issue. How can we get this sent over to you?
All i need is your key and ignition switch sent to me for me to be able to send you back a programmed emulator. Contact me at mustafajafarh@gmail.com for details
Hi, what are the sockets sizes? Are they torx sockets? Thanks a lot.👍🏼
I didn't have a torx socket to remove the steering column. I found that a 3/8" 12 point socket worked for me.
Very informative video! I have a problem with removing the ESL, the steering is not in a lock position but the bolt is not moving, do you know what may be the problem? If I change the motor in ESL, do the ESL needs to be Re-programed sync with the Key?
The bolt is a 13MM , then you can depress the stud and remove it from the slot. No need to reprogram anything if you are replacing the motor only
Just had this happen to me only way to fix was emulator I had to cut top of old esl and take the inners out to remove the bolt reprogrammed ESI and works good no other way of removing the bolt I could find
@@karimsadoouk7819ko
Is this also applicable to a 2006 ml350? Thanks.
Most likely yes , best to confirm if yours is the same.
My GLK 350 ESL does not work. The steering wheel is locked without any movement at all. How can I get you fix it for me? Thank you.
I will need your key and ignition switch sent out to me , contact me at mustafajafarh@gmail.com for details
can you do this method if you have the power telescoping steering wheel position and not the manual. I really want to get this done before it fails. would i also have to remove the eis. please advise
Yes
Awesome, thanks. I just sent an email. @@MuLife
Hi Thanks, If I'm going the emulator route, can I just leave the old lock in if it's in the unlocked position, and not connected. @@MuLife
Hello guy great video my car is doing that how can I get you to fix it please respond thanks
Contact me by email mustafajafarh@gmail.com
@@MuLife okay thanks
How can I contact you?
Could a mercedes dealer program the amulator? I live in Norway and do not know of anyone that can program it .
The dealer will not program an emulator. You can send out your key and ignition switch to me and i can help you out. email me at mustafajafarh@gmail.com for pricing and info.
I have the sound the steering unlocks , but it still doesn’t power on like in the beginning of your video
Explain please.
Excellent video thank you for sharing !
Is there any way to " bypass the ELS module without the Emulator?
No , the vehicle needs to get authorization from the ESL / Bypass.
I own a Mercedes GLK and when I turn it on, I don't hear that sound?!
What does that mean?
Does this mean that the EIS has been removed?
Where are you located and how do i contact you?
do u have to program the emulator?
Could I just open it and use a griding machine to cut off the lock pin, ???
Can I have your contact information to send you my ignition and key. Currently the key is stuck but I took out ignition and the key came right out. I pulled it back in and the key stuck again. The car was in a front end crash, now it won’t start no crank. Pyrofuse was replace, I can start it if I manually activate starter relay. Thank you for your help
Hi Frank , send me details to my email mustafajafarh@gmail.com
How long does it take you turn around time if I send you my equipment? What do I need to send you? Just key and esl ? Or do you need that part also The key goes in
1 business day turn around, only need key and ignition switch.
contact me by email in description for details
@@MuLifehow difficult is it to remove the ignition switch?
I had no lights on my C300 - 2011 . Got a guy charging $350 to re program the ESL and $200 to install it back. Now the lights are On In Cluster
but car not starting, he is saying - The Starter motor is gone... ? Can that be true ?? because I drove it quiet a few times with relay by-pass method
Please assist. I've sent you an email