RST X5 1.5" Front & 1.4" Rear Lowering Spring Install on a 2010-2015 Camaro - Phastek

Shop RST X5 Lowering Springs: bit.ly/3bniPf3
Lower the center of gravity and eliminate some wheel gap in your 2010-2015 Camaro with RST X5 Lowering springs. They are made right here in the U.S.A.
Torque Specs for 2010 Camaro SS
Front
Sway bar end link at strut 52 lb ft
Lower strut bolts 59 lb ft plus 180 degrees
Top strut mount bolt 52 lb ft
Strut assembly bolt 52lb ft
Rear
Trailing arm 30 lb ft plus 120 degrees
Sway bar end link 36 lb ft
Lower control arm 30 lb ft plus 120 degrees
Strut bolts 43 lb ft
Upper control arm at knuckle 44 lb ft
Strut mount 33 lb ft
Lower rear shock nut 59 lb ft
Contents of This Video
00:00 Introduction
00:43 Tools Used In Video
00:52 RST X5 Lowering Spring Install on 2010 Camaro SS
05:44 Before & After Camaro SS Lowering Springs
05:58 Outtro
Subscribe at - / phastekperformance
Instagram: / phastekperformance
Facebook: / phastek
Twitter: / phastek
BACKED BY GM AFTERMARKET PARTS EXPERTS
Phastek Performance has everything you need to modify, customize, and upgrade your Chevrolet Camaro, Corvette, Silverado or GMC Sierra with our large online aftermarket parts store. We carry a large inventory of aftermarket performance parts and styling upgrades.
PHASTEK HISTORY
Phastek was founded by Auto Enthusiasts, for Auto Enthusiasts! PhastekPerformance.com was launched in 2009 as the best place to purchase upgrades and modify your new 5th Gen Camaro. With our own dedicated shop car, a 2010 Camaro 2SS/RS in Victory Red with Manual Transmission and LS3 Engine, we installed multiple aftermarket performance and styling upgrades, as well as tested multiple other upgrades options for our customers. Our 2010 Phastek Camaro is currently Turbocharged, along with a host of other upgrades, and produces over 800 Horsepower.
Over the years we have added multiple vehicles to our line up. In 2019 we included Chevrolet Silverado & GMC Sierra aftermarket parts. In 2020 we made the decision to add Chevrolet C7 Corvette and Chevrolet C8 Corvette aftermarket parts.

[@_JTPR_]

You can stop smiling for a second to talk 😂

[@jayay3089]

Can you run these with 305 30 20 tires with no rub???

[@adambedell73]

Great video!- thank you. Quick question- do the springs make the chassis of the car lower to the ground and if so how much? I am concerned with ground clearance as i have an old hydraulic cylinder hoist that you must drive over top of.

[@PhastekPerformance]

Yes, it does make it lower. There is still a rake to the Camaro, its not leveled out. So the rear does sit slightly higher. We drive it over speed bumps in parking lots and it does not rub. If that helps.

[@adambedell73]

@@PhastekPerformance ok- thank you!

[@tylerjoe765]

How long will it take with no lift

[@PhastekPerformance]

Probably about 3-4 hours. I'd give myself an hour for each spring.

[@josecalderon4417]

How long would shipping be to Fontana ca

[@PhastekPerformance]

Shipping these springs would take about 3-4 business days to get to California.

[@juancorral7155]

Will it scrap my tire 275 40/20r ?

[@PhastekPerformance]

If you are asking about the Factory Rear size tire, then No it will not rub.

[@jacobmartin1181]

How well did it ride on lowering springs?

[@rnrcustomwheels8942]

ehh

[@PhastekPerformance]

It rides ok, Since you are lowering the car, you lose shock travel. So if you hit a pot hole you are going to feel it.

[@Tlopez0]

Any rubbing ? On a v6 with 245/55/18 ?

[@PhastekPerformance]

No, we have not had any issues with rubbing for that size tire.

[@trevornull2249]

Does this Camaro have 20 inch wheels or 18

[@PhastekPerformance]

20"

[@HourGlassLife]

you told people not to use spring compressors . bad advice. horrible advice.

[@mobbmikeyy]

real men dont use those shits