Видео

Thank you. Depends on which stage I am at. Early on it's around 600-800 rpm. Finishing and polishing it's right up there.

Thank you very much for your kind words. I wasn't sure at first but am happy with the end result 👍

Thanks Doug. Unfortunately my lathe isn't at my home where my epoxy was so I had to do it a little more convoluted. Same with the finishing spray. But yes that would have been easier. Cheers mate 👍

Thank you very much for your comment- I really appreciate it.

Thank you Freddy. The leaf spring I think was 3". The paste is a home made finish that is really good and a lot cheaper than the store bought variety. I made it according to Deadwood's channel. ruclips.net/video/0zdLQczkNbE/видео.html

Thank you Karen! 👍

Thanks Tim 👍

Thanks Dan 👍

Lol thanks Shani. I'll have to get it to you sometime 🤣👍

Thanks very much Brian. Well do a pinker one at a later date.

Thank you Karen. Still need to do a bright pink one though! 😊

Thanks Doug. Hopefully I can keep him interested in it. Thanks for the kind words mate. 👍

Thank you Mauro I appreciate it.

Heya Brian. Thanks for your kind comment and for subscribing. Which ones do you refer to- the silver metal ones or the gold plastic ones? I started with the silver metal ones from a guy on Etsy in Ireland but they work out at close to $10 aus each. The gold plastic ones I had done locally and they were 18 for $65 aus.

@@makermark1 Is the one you used in this video the metal or plastic version?

@@briansbuildsandoutdoors4936 that is the plastic one. Subsequent to getting the 18 done for $65 I sourced the base material from an engraving supplier and have had hundreds done for a fraction of the cost. I can give you the details of the supplier if you like but you will need to find an engraver who is happy to use your material as it cuts into his profit margins.

Thank you for your kind words Barry! Cheers!

Thank you very much Mauro 👍

Thank you very much Ray. Hopefully he will want to do more! 👍

Thank you very much Dan. I wasn't too happy with how thick I left the base on Big Blue so I worked on it a bit more when I made the large round nose scraper (which incidentally goes up in a few hours time 😁)

Thank you Rusty 👍

Thank you Dan for your kind comment

Thanks a lot Doug for watching and your kind comment. 👍

Thank you Rusty 👍

Thank you very much for watching and for your kind comment 👍

Hi Steve. Thanks a lot for watching and your comment. I appreciate it 👍

Thanks Morgan. I was disappointed as it could have turned out so much better. Thanks for watching and commenting. 👍

@@makermark1 they say we are our own worst critic....

@@morgancalvi6675 true 😁

Oh I didn't know that. Thank you Morgan.

@@makermark1 well, hey, you said you didn't really do Christmas...learn something new every day though.

Thanks Doug and thank you for watching 👍

Lol thanks Tim. 😁🤣👍

Thank you very much gamer! I appreciate it 👍👌

Thank you very much Mauro 👍

Thanks Barry 👍

Not always original but thank you for watching and your kind comments Mauro 👍

Thanks for that. Yeah I had never seen that kind of bottle opener either.

Thanks Doug. 👍

Cheers Aston

Thank you Petrica. I'm very happy with how it turned out.

Thank you very much for watching and for your kind words Karen 👍

Hi Marilyn. Yes it is a large round nose scraper and I find it invaluable. I actually made it myself for quite cheap and it's quite easy to do. Here is a link to how I did it. ruclips.net/video/MpH9c28wD00/видео.html 👍

@@makermark1 Thanks Mark. I'll have to get hold of the hss and get grinding. Thanks for sharing the video of how you made it.👍

@@marilynbolton7524 you are welcome Marilyn. If you have a look you will see I used an old utility/truck leaf spring for the metal and it's surprisingly good and cheap.

Thanks Tim. I've had a couple of friends say they still like it but it could have been so much better 😂

Hi Doug. Thank you for your kind words even though it wasn't a success. My email is mortyrox@gmail.com

Thank you for the kind words Tim. If only I had sat the inserts on the epoxy when I was sealing the rim groove. Oh well... Next time. 👍

Thanks Aston. Yup a lot of work for not much. Thanks for watching and commenting mate 👍

Cheers Tim 👍

Thank you Gary. Hopefully I can keep his interest going! 😊

Thank you Mauro. My neighbor is very happy with it.. Thank you for subscribing as well. I've just subscribed to you also 👍

Thank you Petrica

Thank you Petrica

Thank you Petrica. I didn't really do much this week but my neighbor is happy with the result .😊