Done been through all this, everything is working and no service 4wd, front wheels not pulling. Transfer case is working and turning front shaft, replaced front diff actuator and still nothing. Cleaned all grounds with no luck, am at a loss on what to do and am considering giving up on it.
My 04 Silverado 2500 is stuck in 4wd Hi. Light is on for service 4wd, and the button 4wd hi is lit up. But I press 2wd or 4wd lo and nothing happens. It went into 4wd hi easily, and then it just stopped working , any help!
Still blowing ATC fuse under hood. I tried multiple different switches, ecms , cleaned ground under driver side. looks like fluid leak on the transfer case, can’t see any cracks. I even tried new actuator. Motor seems to make noise before blowing fuse again. Thoughts? Thank you!
I have a 2007 suburban. And the side fuse box doesn't have that 4wd sticker... Should I just check all the fifteen amp fuses in there. Also underneath the hood in my fuse box. It doesn't have the trek like you showed.
Thank you brother!
You’re the truth bro
Thank you so much!!
Good video brother thank u
Yeah saw a video on people replacing the switch and it fixing it... i can count on one hand how many vehicles I've ever replaced that switch on.
Done been through all this, everything is working and no service 4wd, front wheels not pulling. Transfer case is working and turning front shaft, replaced front diff actuator and still nothing. Cleaned all grounds with no luck, am at a loss on what to do and am considering giving up on it.
My 04 Silverado 2500 is stuck in 4wd Hi. Light is on for service 4wd, and the button 4wd hi is lit up. But I press 2wd or 4wd lo and nothing happens. It went into 4wd hi easily, and then it just stopped working , any help!
Still blowing ATC fuse under hood. I tried multiple different switches, ecms , cleaned ground under driver side. looks like fluid leak on the transfer case, can’t see any cracks. I even tried new actuator. Motor seems to make noise before blowing fuse again. Thoughts? Thank you!
01 suburban 5.3l
The saver is because there is room around the pump and it rocks back and forth wearing a hole into it.
I have a 2007 suburban. And the side fuse box doesn't have that 4wd sticker... Should I just check all the fifteen amp fuses in there. Also underneath the hood in my fuse box. It doesn't have the trek like you showed.
on the 2007s its fuse 67 and is a 30 amp
Thank so much...
Do you have a transfer case control module install video? Or cleaning the plugs? I’m about to get look around your page!
I have a longer video about the whole service 4wd process on my channel.
Where’d you get that wood grain dash bezel?
Denali and escalades have them
Boss, I can get into 4Hi but not 4Lo. I put the transmission in neutral, click 4Lo, I hear it try to engage but doesn’t.
Sounds like it’s not letting the actuator engage fully.
I have a question
What’s up?