"RE" Governor Pressure Solenoid & Sensor Replacement - 42RE / 44RE / 46RE / 47RE / 48RE
HTML-код
- Опубликовано: 4 дек 2011
- Basic Dis-Assembly, and replacement
Pressure Solenoid , and Pressure Transducer (Sensor)
This Covers All the Below Dodge & Jeep Automatic Transmissions:
A500 , 42RE , 44RE
A518 , 46RE
A618 , 47RE
48RE
CascadeTransmissionParts.Com 
Авто/Мото
Thank you, Thank you, thanks you. I've never worked on a car or truck before and saved a ton of cash!!! I didn't even have car ramps and had it done in 45 minutes. My wife was so impressed she dropped her dress.
😎😂
That's right.
I'm glad youre her husband and not mine 🤣
Wow
toy
Thanks for the video. My local Ringgold Dodge dealer wanted $1000 to change these parts. After watching the video I decided I can do this on my own and did and saved a ton of money. It took me about 2 hours from start to finish dropping the pan and cleaning it up and replacing the parts then closing it back up. The truck shifts great like it should.
I can't thank you enough, I followed your instructions last week to replace pressure solenoid & sensor in my 01 Dakota and since then have driven 400+ miles with no problem, and no "1763" error code! You guys rock!
We do our best to provide the support needed to the DIY consumer.
Thanks for the kind words !
How do you test before just swapping out good parts for newer good part? Can you check with a multi meter for resistance in the electrical components?
I ordered the master solenoid kit for my 48RE from you guys a few days ago, and just recently installed it. Transmission works like it's supposed to now. The kit was great! Good packaging, included all the parts and gaskets. The small things make all the difference - including the misc gaskets and whatnot. The only notable difference is my torx bolts were T25's, not T20. The 48RE is mated behind a 5.9 diesel out of a '04 Ram 2500.
great job! thanks so much saved me 600.00 so now i have groceries for my kids. God bless
Thank you so much for your video. I was afraid of tackling this on my own but after I found out how much a technician would charge, it pushed me to DIY it. You have been a tremendous help!!! Thank you again for doing this for us.
I purchased a 42re HD overhaul kit from you and would like to say thank you for the quick shipping! as I was installing these parts I did a quick search for tutorial videos and was very happy to see that your company provided detailed instructional videos like this one. I will absolutely use cascade again and recommend you guys to friends and family. thanks again for excellent customer service!
+Chris Thut thank you for the kind words!
@@CascadeTransParts how long does it take to ship once it leaves your facility to Texas (78133)?
Thanks for posting. Replaced both the solenoid and transducer yesterday, all for price of parts (about $112), avoiding likely a $800-$1,000 bill from the trans place. Excellent and clear instructions - Thanks again for helping me save $$$
+gjmed33 Jeep 2003 Grand Cherokee
what parts did you use??
Thanks for the kind words , and input about the T20's
We Appreciate the business !
HUGE thanks to you for doing this video the way you did. Showing how the wiring harness was connected and should be disconnected really made my repair easy. Videos like this are what we need to help people.
Very Informative, Thank you very much. Just got done doing this work today after ordering parts online. Your information here saved me lots of money and more importantly time and backache by describing the exact size of the nuts and torques that way I could grab every tool i needed before sliding under the truck rather then getting up and down 15 times to get the right sizes and tools. Much appreciated and again Thank you!!! (also fixed the issue i was having, truck was reving but not shifting properly and 3rd gear was all but useless, at high speeds would try to speed up and truck would go to 3rd only to switch to 2nd and redline in acouple seconds. All seems to be operating properly now 'knock on wood' and would not shift out of any gear unless at or above 3.5k rpms, was rather annoying and gas consuming,)
sweet, my weekend project. hope it fixes my problem,. won't always go into overdrive. thanks
max powerr did this fix yours
@@jasoncowan2070 I rekon we will never know. HaHaaa
Simple and to the point with less tuck. I like it
Thanks for the great step by step! Just finished replacing the sensors on my 98 Dodge Ram 1500, and trans is shifting much better 3rd to 4th!
WOW you made it Sound and look very easy every other person I seen do this job on RUclips made it seem very difficult but in this video you just showed me the 100% Truth on how to get this so called Big Job Fix in The lowest time. Thank you So much for all of the information. I decided to do this job on my 99 Dodge Ram 1500 myself because a lot of mechanic shops out here in Atlanta Georgia or nothing but rip offs. I put $1,400 down to get this job done and they still did not fix my problem and lie to me so I'm very fed up with taking it to a shop
Hi, I feel so happy I found this video. I have a 2005 slt dakota. Transmission is 5 speed. Some times the check engine come up and I feel a hit in the transmission and it stay on 3er speed. Normally if it happens when I am doing a stop, I set 2nd and drive to a parking lot and turn it off, wait a minute and start over, set D and problem solved. Thanks for helping me with some idea about what to do to solved permanently this problem. Thanks.
This is a very important tape I'm glad I look at it thank yu so much God bless yu where ever yu are and who yu are peace
Excellent video.
I only lightly dispute the 25-30 minutes. Doing this on your back with constant dripping makes this unpleasant, but your video is really great.
I bought a 1999 DODGE DURANGO slt plus 5.9 for 850$ the shop told the owners it needed a complete rebuild,but im a MOPAR guy and knew what it was,with one of your kits for the 46re I got a nice truck with leather,power 3rd row seating tow package,well kept truck, cheep.THANK YOU!!!
Very nicely done. I'm undertaking this project tomorrow morning on a '98 Durango. Gonna get dirty haha! Thanks for the excellent walk through.
Greg Cunningham how did you fix go I got a 98 Dodge Durango as well same problem is it something I can do myself or do I need to take it to a mechanic
Did all of this and adjusted my kickdown cable and my transmission seems fine! Only now am I reading about band adjustments that I was apparently supposed to do :/ What's the harm if I don't do them?
You'll notice 2nd to third shift will slip sometimes, especially under acceleration
These bands grip a drum when applied and hold the drum stationary to complete the shift. Slipping bands will wear out and score the drum.
there is a variety of questions that would affect my answer
please feel free to email me through our website
8-7-2014
I2001 Dodge Ram 1500
I had this problem a few months back, took it to a Mechanic, charged me 350 dollars and 17 dollars for a sensor. It was better but not right. It did it again, My friend told me about your video. I bought the two parts from Auto Zone, 197 dollars plus oil, gasket and filter.
It took me about what you said to do the work. Set up, drain, gasket and filter another hour. I ran it 3 miles with no problem. I drove it home, 23 miles and it shifts like a charm.
I don't know what the guy I took it to put it, but it wasn't these two parts., I will never use him again. Thank you for your time it took to make the video and your knowledge you shared.
excellent video, thank you so much for taking the time to show how easy it really is and the man wants a ton to do this...
P1784 L-R Pressure Switch Sense Circuit this was the code I was getting on a 2000 dodge durango 4.7L.. is this an easy fix?
first and foremost has a service ever been done to it ? often if the fluid is even half a qt low these units can react quite strange. I would eliminate these aspects first before replacing parts. Feel free to email me further through our site
Bought my governor sensor and transducer from Cascade. Came in 2 day to New Jersey. I just changed them with the help of this video. 07 ram 5.9 Cummins shifts like new with 101000 on the odometer. No more shutter shifting between 1st and 2nd. Down shifts into as it should as well. Thank you Cascade. I highly recommend.
I recently bought one of your service kits & I gotta say, I couldn't be more happy with the price and quality. Thanks a lot!
Andy Roby Thanks for the kind words and Support !
We work hard to keep the price down , and work on volume while offering and keeping the items good quality. Many of the other parts companies have gone to all Offshore China components.
what would cause the overdrive switch to cut on an off while driving
I was called when the transmission gets hot and kicks itself out of overdrive. Your transmission cooling lines might be clogged. There's a check valve somewhere so you can check that.
Told*
NEVER EVER PULL A CONNECTOR BY THE WIRES!!!!
You guys are the best. I never would have tried a trans repair. Lots of respect...and when I need parts I know who to call......thanks
Thank you very much for making this video. The way you described every detail really helps when it comes time to actually replace the parts.
Thanks so much for this my truck has been acting up for YEARS now having watched this I changed the sensors and BAM! Done deal
Received the Solenoid Replacement kit in the mail today and ordered on Thursday. Everything in the kit looks 5 by 5. Looking forward to the install.
Thank you, you were thorough, I was focused on the overdrive solenoid because I think that’s my problem. My 2002 newer gen takes long to drop into last gear, but if I let off gas it immediately goes into the gear. If I don’t let off gas it won’t go to next gear until I let off gas. Great video, you know a lot about Chrysler/dodge transmissions….
Thank you, just used your video for the P1762 error on a 2003 Grand Cherokee to replace the solenoid and sensor.!
Thank you so much for posting this video and taking the time to answer questions posted on here. I called to buy some parts form you guys and the service was EXCELLENT. If there was a rating I would rate you guys 10 out of 10. Thank you!
Thank You so much for taking the time to put this on You Tube. May God bless you for helping others.
thats good news , Thanks for the kind words ! ! !
Keep us in mind for future transmission parts needs !
Excellent walkthrough , very well put together , clear instructions .
i have replaced a couple sensors using your videos as a guide......very very helpful.
thank you for your videos.
really well put together. thank you for sharing your knowledge. i have a 99 dodge ram 1500 5.2L that i need to do this with. as well as a filter replacement.
Thanks for this video. I repaired my son's 1998 GC replacing these parts.
Thank you for this great video. It gave a great view of what I would see once I drop the transmission pan on my 96 Dodge B3500. I am hoping that I don't have to replace the governor or control solenoid, but if I do I know this video will be a great help.
That was probably the best job of explaining how to do that job. Thank you and God Bless
Great explanation with a clear view of your work. Thank You.
I was able to fix my 46RE using the steps in this awesome video!
Perfectly explain in lay man words. Thank you very much.
Great video, im going to attempt this exact process this weekend!
Just found your channel....your awesome..I appreciate you taking the time to show the inner working..thank you.
just replaced solenoid and the sensor as shown in the video. Shifting like brand new! thanks again!
Really appreciate this sir, you helped us diagnose and resolve our transmission issue on our 2000 Dodge Dakota 4 x 4! Many Thanks!
+Jennifer Utter no problem!
@@CascadeTransParts I have 01 ram 1500 that doesn’t upshift and stays at 4000rpm at 55-65mph. Could this be the governor?
thanks for the video will try this on my 98 Dodge Durango hope the transmission you were working on is really close nice video man
Glad we were able to assist , hopefully you purchased the parts from us.
Thanks for the kind words !
Doing my 1996 Grand Cherokee 5.2 mostly this weekend--Even though I just replaced filter and fluid about a year ago will replace w new, 150,000 miles and transmission fine except for that so no complaints
Great info... Thanks.. Got an Auto 42RE that when warmed up(when cold, no problem!!!) will not easily shift into the next gear after stoping at a red light. It starts in the very lowest gear and then gradually shifts, which means you BETTER NOT STOP IT ON A HILL GOING UP!!! It has only one speed sensor but I bet that solenoid needs replacing too. Mike in LA, Calif.
Thank you very much... I have a 2002 dodge 2500 5.9L Cummins, It was starting out in 2nd gear and skipping over third. I put in the Governor Solenoid and Tansducer using your video and now it runs like scalded dog. Thank you Mr. You Tube Mechanic Man, We Salute you. If i were close I would buy you a beer.
Great video. I hope to do repair this month. Have a great weekend.
Doing this next weekend. Excellent vid. Thanks
thanks for the video! now that I know what I'm looking for, I can get right to it!
I just replace the governor solenoid and governor sensor but still change like weak,, any information thanks
I purchased the complete governor solenoid, gov sensor, TC and OD solenoids with harness, Output Speed Sensor from Cascade Transmission fir a 95 Jeep Grand Cherokee 4.0 42RE... Received the parts shipment in 3 days. Excellent Customer service, simple website layout and good youtube videos. Recommended for all who are looking for transmission kits or single parts, books and tech manuals.
Very informative video. Made my job much easier replacing these two components. Thank you.
oh thats great - Thanks for the uplifting words !
Thank you for posting this. It will be a great help.
Thank you, awesome instruction skills.
Cars can be mysterious { What Now??! } . But Jeeps are easy to work on with the right tools. You made a $$ process easy DIY. Thankyou!!
Thank you for the video I’m looking at replacing both governor and solenoid I just got a engine code today saying it’s governor transducer figured I would change out both.
Glad it helped !
Thanks for the kind words
we reply to all emails , keep in mind the previous holiday weekend.
Thanks
I am waiting on my part from Cascade Transmissions and they seem to be the real deal i mean i was responded to by email and minutes later by phone and ended up talking to the guy 3 times that day about parts for my vehicle overall i believe they are the best and will use this company again.... Thanks
what a concise and thorough video, thankyou very much
have you opened (spread) the snap ring on the inside of the housing to allow the intermediate shaft to slide in ?
the snap ring is accessed through the top cover plate
awesome video and schooling, thanks
nice presentation and the video quality was excellent thank you.
Fantastic job and great information! Thank you sir!
what would i need to get if my torque converter clutch solenoid is open or shorted?
just finish my 03 dodge ram van 1500 ,cost 285.00 compared to 500-650 only took about a hour thanks great help bruce
you are very welcome , just take your time , and it's quite straight forward
Hello . My dad have some problems with his Dodge Ram 4x4 hemi 1500 . i think its a 2003 but it can be 2005 too...question i have is if its same transmission as in this video or not ? Car had a enginelight and when i read the code it just say p0700 nothing more, but i want to remember him talking about it change gear at higher rpm and not sure if he mention something about not get in highest gear , Swedish and english can have different names so i guess is the overdrive i mean here . would these parts fit our transmission ? :)
Excellent video. You're a very good instructor. Thanks!
Very well made video.....i know now I can do this job. Thanks, going to save big time.$$
im having a problem with my 2002dakota has a 5.9 transmission feels like it not shifting right also it doesnt kick down when i mash the pedal also when acceleration it doent have the pick up and go like it did before what can it be plz help thanks
William Harris hi I am having that same problem. Did you find the remedy for your truck?
it does help thanks, I also just seen your other video on master solenoid kit, I just looked at my truck and its gonna be a piece of cake job, Thanks for your great videos,
Nice job and very informative. Is this the same procedure I would use on a 2008 dodge avenger with the 2.4 4cyl and A/T?
Thank you so much for video! Super informative and extremely helpful
Man, that was incredibly helpful. Thanks for uploading.
+ThePieGuyIsI Hello - Please be sure to give us a thumbs up and subscribe to our channel , we have more videos on your truck coming soon - Thanks for the kind words ! !
Thanks for the kind words !
i think it is covered in a couple spots in our videos
there is a myriad of issues , but the most common is sticking in first , or sticking second - no upshift
The sensor will not come out. I tried prying it with a big screwdriver but it still will not come out. The retainer is not the cause, it is off. Any suggestions?
well that was very knowledgeable. my 01 jeep wj 4x4 select track been acting up. i will try this
I bought a complete kit from Cascade to replace all the sensors and solenoids in my Dodge 47RE transmission about a year ago, Transmission never did work right. I bought the billet update for the governor pressure solenoid and a new governor pressure sensor was part of the kit. I ohm tested the new governor pressure sensor and compared to the one that I had installed a year ago that came from Cascade, turns out that one I got from Cascade was wired wrong and that's why I have been fighting transmission problems for the last year....Thanks Cascade for the shit part and additional trouble
Got a question I have a 2001 Dodge 4 by 4 1500 front gear seemed OK when driving in shifting and reverse is slipping any ideas
Thanks so much. This was very helpful :)
Hello , first question when this occurs is the check engine light coming on , or is the light on all the time ? This could be a few different components ; if no check engine light it most likely is a mechanical issue.
Best video I've seen yet keep it up Happy 2023
are the solenoids the same as the transmission fluid pressure sensor/switch b & c circuits. thanks nevin
Thanks so much for the information and techniques.
oh thats great news , glad to help !
Just out of curiosity, im getting ready to replace the Governor Pressure Solenoid on my 98 5.9l Auto trans Durango, Im not 100% sure what transmission it is. But im gettting codes about the transmission Temperature Sensor as well, but im not finding any info on a transmission temp sensor, where would i find something like that?
Thanks