How to Replace Governor Pressure Solenoid 1994-2002 Dodge Ram 2500
HTML-код
- Опубликовано: 15 авг 2023
- Buy Now!
New Governor Pressure Solenoid from 1AAuto.com 1aau.to/ia/1ATRX00091
This video shows you how to install a new governor pressure solenoid from TRQ on your 1994-2002 Dodge Ram 2500.
This process should be similar on the following vehicles:
1994 Dodge Ram 2500
1995 Dodge Ram 2500
1996 Dodge Ram 2500
1997 Dodge Ram 2500
1998 Dodge Ram 2500
1999 Dodge Ram 2500
2000 Dodge Ram 2500
2001 Dodge Ram 2500
2002 Dodge Ram 2500
Tools you will need:
• 11mm Socket 1aau.to/obxf/1AXAA00015
• 13mm Socket 1aau.to/obxf/1AXAA00015
• T25 Torx Socket 1aau.to/oEb/1AXAA00008
• Ratchet 1aau.to/obCW/1AXAA00016
• Socket Extensions 1aau.to/obxf/1AXAA00015
• Torque Wrench 1aau.to/oaGH/1AXAA00044
• Cloth Rags 1aau.to/oCL/1AXSS00035
• Gloves 1aau.to/oaa4/1AXSS00048
• Safety Glasses 1aau.to/o4f/1AXAA00343
• Drain Pan 1aau.to/oz3/1AXAA00320
• Floor Jack 1aau.to/o6S/1AXAA00068
• Funnel 1aau.to/oh5/1AXAA00310
• Jack Stands 1aau.to/oUH/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
How did you guys diagnose the governor? Or was there never a problem just a replacement video
Hahaha I can literally smell this video😅
You'd think there'd be a pump you could attach to the dipstick valve to vacuum drain it, rather than just opening a pan that's full of fluid. Seems really sloppy and weird.
What would cause the transmission to not have a reverse? All other gears work perfectly with OD. Am I screwed or is it my governor?
Is there a video of you replacing the whole kit?? Not just one sensor?
Where is this part located at on a 1995 Dodge Ram 1500 5.9?
What does this presure governor does
Can a completely dead solenoid make my truck not shift at all
Probably should have torqued in a start pattern
Wish you have a video on the 2006 2500 Cummins rwd
Excellent work making this video! Very straight forward and easy to interpret
Genuinely so helpful.
Exelente tutorial
Very nice video 💪
Gracias amigo🙏🙏💪
Is it the same on the 2003 dodge ram van ? please let me know
My transmission now has a slow leak on the engine bay side of the transmission after replacing this part. I cannot figure out why. Pan gasket seems fine with no leaks