I've finally had a chance to install the fittings that I purchased from Colin. Fitting to my saw took less than 5 minutes (mainly trying to remember where I had my Torx drivers stored) and the improvement is fantastic. It is so nice to be able to plug the hose in and out in a second without having to fumble around. Colin sent me two different fittings. One in the PLA Plus as per the video and one in a new material (3D resin printed?). I tried both and they both fit perfectly. I have left the new style in the saw as that seems to "feel" better when fitting and removing the hose. They both hold it securely and it is easy to fit to both, but the new style just seems a little nicer. I also received the wonderful vacuum wand attachment from the other video and that is also great. Once again no trouble to fit. Keep up the great work Colin. 👍👍
Thanks for the feedback, David. Really appreciate it. I'm glad it's working for you. Yes, the other version is 'resin printed'. There'll be a video on that one too. Stay tuned.
Just come across your video of the irritating swivelling connection to the Festool TS 55 saw. Your solution looks a great idea so have sent for one to me in the UK. Thank you
Hi David. Thanks for your feedback. I really appreciate it. Your parcel is being prepared and will be shipped on the next business day. Regards, Colin.
Recently I got a set from colin for my Festool TSC 55 KEBI. I have mounted the set and I have to say it is great, highly recommended. The fit is sublime, it is beautifully finished. I am more than pleased. Kort geleden heb ik van colin een set voor mijn Festool TSC 55 KEBI. Ik heb de set gemonteerd en ik moet zeggen het is super, een echte aanrader. De pasvorm is subliem, het is supermooi mooi afgewerkt. Ik ben meer dan te vreden.
Hello Colin, many many thanks to your adapters. There was more in my package than i thought, but lets talk about this later :) Festool Tracksaw - dust port mod: This Adapter was really fast and easy to install on my Festool Tracksaw and even more fast to connect and disconnect then to my Festool vacuum. It does the job actually better than the original port, no more loose hoses flying to the ground and no more frustration with the plug in/out. I tested the fit, because since it is not typically "locked-in", i was some sort of sceptic. I was really impressed because it came not loose once, and i worked like in the past. Also the Dust Bag works fine, but i am not a huge user on this. Festool vacuum mod - hand tube adapter: I also got an adapter for the hand tube, and also what can i say about this than it actually makes my cleaning a lot easier. Since i got this adapter i used the floor vacuum nozzle also a lot more and it makes the use of it a joy. The fit of the adapter is really good (installation), actually it clicks in like the original fitting, so no worries. Not even once that i had an issue with your products connecting and disconnecting!!!! Also i got a nice adapter for the guide rail, which i have to test out in the future. And a nice Keyring :D Sorry for my bad English, i am from Europe-Austria and still learning. Thanks once again Colin for this easy to use push-fit adapters :D Keep up the excellent work! Best Regards Patrick
I found that I wasn't using it, and only a few people were asking for it. I made them for the PLA version but didn't make it for the resin version of the dust port adapter.
Hey Colin, you are a legend. I have the corded tracksaw and I love it. However, the dust port is what lets the saw down. As I have a 3D printer, do you sell the file itself? Love the video, subscribed and looking forward to more content. 👍👍👍🇦🇺
Hi Chris. Thanks for your comment and feedback. I don't sell the file, but you may be interested in my newly released Mk 2 version of this dust port. You can find it here. www.ebay.com.au/itm/325432767577 If you'd like more information, send me an email at info@colinklupiec.com
Hi Colin, Love the content but I have request which you might find impudent - apologies in advance! Would you consider making the files available so that those of us who might want to print our own adaptors can do so without resorting to reverse engineering your hard work? Many thanks...
Hi Johan. Thanks for your feedback. I’m unable to share the file. Although they are now available for purchase, currently AUD $15.00 + postage. Send me an email to info@colinklupiec.com if you’d like to buy one. Regards, Colin.
Thanks for your question. This part is now updated to the MK3 version and made with toughened UV resin. It's super strong. You can see me test the resin with the part in this video ruclips.net/video/od7WnLbkL0k/видео.html The part is available for purchase. Contact me on info@colinklupiec.com for more information if you're interested.
Great solution to a real stupid one from festool. Using the dust bag is a must for me so great. Not taken on the yellow though 😂 are they available now?
Hi Mark. Thanks for your feedback. Yes, they are available now. You can contact me directly about this at info@colinklupiec.com. Or you can also check out my eBay listing. www.ebay.com.au/itm/325063357170. Regards, Colin.
Hello. Thanks again for your interest. I'd like to send you a promo. Send me an email with your name and address details and I'll get the products to you. info@colinklupiec.com
That looks great. Are you going to add it to ebay like your kerf offset spacers for the track? Also, where did you get the LVLs you used in your workbench bench?
Hi David. Thanks for your feedback. I really appreciate it. Yes, I will make it available soon. I'll make a video announcing when that happens. By the way, the original Kerf Guides have been updated to now cater for all 7 blade sizes. You can find them here. www.ebay.com.au/itm/324998651788#shpCntId I picked up the LVL from my local timber yard here in sunny Newcastle (Australia)...Saddingtons Building Supplies Have a great day.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
This part is now available in the MK3 version.
www.ebay.com.au/itm/326266589464
I've finally had a chance to install the fittings that I purchased from Colin. Fitting to my saw took less than 5 minutes (mainly trying to remember where I had my Torx drivers stored) and the improvement is fantastic.
It is so nice to be able to plug the hose in and out in a second without having to fumble around.
Colin sent me two different fittings. One in the PLA Plus as per the video and one in a new material (3D resin printed?). I tried both and they both fit perfectly. I have left the new style in the saw as that seems to "feel" better when fitting and removing the hose. They both hold it securely and it is easy to fit to both, but the new style just seems a little nicer.
I also received the wonderful vacuum wand attachment from the other video and that is also great. Once again no trouble to fit.
Keep up the great work Colin. 👍👍
Thanks for the feedback, David. Really appreciate it. I'm glad it's working for you. Yes, the other version is 'resin printed'. There'll be a video on that one too. Stay tuned.
Just come across your video of the irritating swivelling connection to the Festool TS 55 saw. Your solution looks a great idea so have sent for one to me in the UK.
Thank you
Hi David. Thanks for your feedback. I really appreciate it. Your parcel is being prepared and will be shipped on the next business day. Regards, Colin.
Recently I got a set from colin for my Festool TSC 55 KEBI. I have mounted the set and I have to say it is great, highly recommended. The fit is sublime, it is beautifully finished. I am more than pleased.
Kort geleden heb ik van colin een set voor mijn Festool TSC 55 KEBI. Ik heb de set gemonteerd en ik moet zeggen het is super, een echte aanrader. De pasvorm is subliem, het is supermooi mooi afgewerkt. Ik ben meer dan te vreden.
Thanks for your kind feedback. I’m glad it’s working for you.
Hello Colin,
many many thanks to your adapters. There was more in my package than i thought, but lets talk about this later :)
Festool Tracksaw - dust port mod:
This Adapter was really fast and easy to install on my Festool Tracksaw and even more fast to connect and disconnect then to my Festool vacuum.
It does the job actually better than the original port, no more loose hoses flying to the ground and no more frustration with the plug in/out.
I tested the fit, because since it is not typically "locked-in", i was some sort of sceptic.
I was really impressed because it came not loose once, and i worked like in the past.
Also the Dust Bag works fine, but i am not a huge user on this.
Festool vacuum mod - hand tube adapter:
I also got an adapter for the hand tube, and also what can i say about this than it actually makes my cleaning a lot easier.
Since i got this adapter i used the floor vacuum nozzle also a lot more and it makes the use of it a joy.
The fit of the adapter is really good (installation), actually it clicks in like the original fitting, so no worries.
Not even once that i had an issue with your products connecting and disconnecting!!!!
Also i got a nice adapter for the guide rail, which i have to test out in the future. And a nice Keyring :D
Sorry for my bad English, i am from Europe-Austria and still learning.
Thanks once again Colin for this easy to use push-fit adapters :D
Keep up the excellent work!
Best Regards
Patrick
Hi Patrick. Thank you for your detailed and positive feedback. I really appreciate it. I'm glad the parts are working for you. Have a great day. 😀
what about the port for use with the dust bag ? or did you stop making them ?
I found that I wasn't using it, and only a few people were asking for it. I made them for the PLA version but didn't make it for the resin version of the dust port adapter.
looking for ur dust fittings on eBay and that was a no go ? Do you still offer this ?
Yes, I do. That one is the MK1 version. The current version is MK3 available at www.ebay.com.au/itm/326031054029
Hey Colin, you are a legend. I have the corded tracksaw and I love it. However, the dust port is what lets the saw down. As I have a 3D printer, do you sell the file itself? Love the video, subscribed and looking forward to more content. 👍👍👍🇦🇺
Hi Chris. Thanks for your comment and feedback. I don't sell the file, but you may be interested in my newly released Mk 2 version of this dust port. You can find it here. www.ebay.com.au/itm/325432767577
If you'd like more information, send me an email at info@colinklupiec.com
Hi Colin,
Love the content but I have request which you might find impudent - apologies in advance! Would you consider making the files available so that those of us who might want to print our own adaptors can do so without resorting to reverse engineering your hard work?
Many thanks...
Hi Johan. Thanks for your feedback. I’m unable to share the file. Although they are now available for purchase, currently AUD $15.00 + postage. Send me an email to info@colinklupiec.com if you’d like to buy one. Regards, Colin.
But how strong is it
Thanks for your question. This part is now updated to the MK3 version and made with toughened UV resin. It's super strong. You can see me test the resin with the part in this video ruclips.net/video/od7WnLbkL0k/видео.html
The part is available for purchase. Contact me on info@colinklupiec.com for more information if you're interested.
Great solution to a real stupid one from festool. Using the dust bag is a must for me so great.
Not taken on the yellow though 😂 are they available now?
Hi Mark. Thanks for your feedback. Yes, they are available now. You can contact me directly about this at info@colinklupiec.com. Or you can also check out my eBay listing. www.ebay.com.au/itm/325063357170. Regards, Colin.
No light green PLA? 😁
Hi Nial. That’s correct. I figure ‘Festool Green’ belongs to Festool. Green and Gold…that’s made in Australia.
@@ColinKlupiec Fantastic, let's just not mention the cricket. 😳
Yeah, this adapter works great!
Thanks for the feedback. Really appreciate it.
Hello, i am from Austria. Can you send this Adapter also to Europe? Is it possible when its available?
Hi there, thanks for your comment. Yes, I can send the adapter to Europe. It will be available soon. Stay tuned. 😀
Hello. Thanks again for your interest. I'd like to send you a promo. Send me an email with your name and address details and I'll get the products to you.
info@colinklupiec.com
@@ColinKlupiec Hello, i sent you the details. Wish you a nice day and many thanks!!!
@@morli80 Great. Will be in contact.
smart man
Cheers, thanks.
You need to work for Festool!
Hey, thanks for your comment. That’s a nice compliment. Do you experience this problem as well with this saw?
That looks great. Are you going to add it to ebay like your kerf offset spacers for the track?
Also, where did you get the LVLs you used in your workbench bench?
Hi David. Thanks for your feedback. I really appreciate it.
Yes, I will make it available soon. I'll make a video announcing when that happens. By the way, the original Kerf Guides have been updated to now cater for all 7 blade sizes. You can find them here.
www.ebay.com.au/itm/324998651788#shpCntId
I picked up the LVL from my local timber yard here in sunny Newcastle (Australia)...Saddingtons Building Supplies
Have a great day.