Install Oil Filter Adapter, Relocate Oil Filter & Oil Cooler on Big Block Chevy, part 2
HTML-код
- Опубликовано: 28 авг 2024
- How to Install and Relocate Earl’s Remote Oil Filter Bypass Adapter and 10AN Stainless Braided Hoses from Oil Filter Adapter to Oil Cooler to Remote Oil Filter and back to Motor Cool and Filtered!
Earls 1579 Oil Filter Bypass Adapter Link Below
www.summitraci...
TTR 10AN 90 Fittings Link Below
www.amazon.com...
awesome just ordered mine today thanks for the info and parts numbers your videos are awesome and helpfull
Thank You Ronnie Really Appreciate that! Thx for Watching! 😎👍
Nice work. I like it.
Thank you Roger! I Really Appreciate you watching, your Comments and your Subscription! Thank you so much for watching Old Guyz Garage! 😎👍.
Nice work, looking great bro !!!
Thx for watching Pete!
Please post part numbers for braided line and oil cooler.
Ok let me go back and find them. I’ll let you know when I put link in description
Did you need a high flow oil pump?
Hello ChevyCeeLo, this is Franky your host of OGG! I would definitely recommend a high volume oil pump mine is a Mylodon which was a match for the oil pan from Summit Racing. The remote filter and oil cooler and lines hold about 2 quarts! I noticed I have to start the car with no ignition so the motor doesn’t fire right away to get the oil pressure up and pump oil into the remote system in case some drained back into pan. I think this happened and I had air in the line and too much oil in the pan I started leaking a little oil from front and back seal which stopped after I realized what was happening so every time I start it I have to prime the oil pump and remote system to make sure any air is out and the system is full and not in the pan. To prevent too much crank pressure in pan from having too much oil in it. Leaks stopped and everything’s been good! So long story short I crank motor over about 3-4 times to see good oil pressure and make sure oil moved out of pan and fills remote system. Then I start motor! Thx for watching! Please Like & Subscribe if you haven’t already! 😎👍
I'm thinking it's because you needed a sandwich oilfilter thermostat?
Are you pulling my leg or that a thing? Lol
Sandwich oil filter thermostat?
@OldGuyzGarage 🤣 No, seriously, here is the one I'm getting Derale 15782 Thermostatic Sandwich Adapter Kit. This should eliminate the pressure issue, in theory. I believe it will, so lmk?
Was there a gasket? I think I missed steps.
Gasket is rubber o ring built into adapter! Thx 😎👍
Did you leave the old gasket in there?
Hi Chris the new Earls Oil Filter Adapter came with a new gasket/seal sorry if you missed it but yes we installed the new one! 😊👍 Thank You so much for watching Old Guyz Garage and helping us grow the channel by liking and subscribing! Please feel free to ask questions anytime! 😎. Thank you again!
@@OldGuyzGarage Old post, but what i was referring to is the old gasket seemed to still be stuck to the block when you removed the original filter adapter. Did you take it out off when the camera wasn’t recording?