Exhaust Manifold Fabrication - Honda Civic ep3 K Series
HTML-код
- Опубликовано: 4 мар 2023
- Step by step fabrication and TIG welding of a 4-2-1 exhaust manifold for a Honda Civic Ep3.
Link to purchase tungsten electrodes: amzn.to/3JT3uk3 
Авто/Мото
Авто/Мото
Really skilled job. I like how you took the guesswork out of it!
Thanks 👍🏼
Superb, I was surprised how thin the SS is and the jigs and welding are great. Well done.
Thanks
Great work. Enjoyed seeing it all fit together. That's a really good jig too!
Thanks 👍
Nice work, oddly therapeutic 👍🏻
Thanks 👍
How do you weld in between the " Y " inside sides??
That would be an interesting tutorial for who is learning 👍
Lots of electrode stick out
I Love videos like this. I subbed
Thank you!
Amazing Job, absolute prof. 👌🏻🤤
Thank you 🙏
Amazing work
Thank you
Subscribed. Looks like your from the UK 🇬🇧 and putting in work! 🤘
Thanks for the sub! Appreciate it. Yes im based in the north of England.
Finding this again after seeing so many 4-2-1s with 1-3 and 2-4 (or 1-2 and 3-4 pairing) makes me wanna say "Finally, a properly designed tri-y." The only way it could be better is if you'd have stepped up the primaries at least twice, and the secondaries at least once before their respective merges.
Thanks, appreciate the feedback
@@Smffab Actually, I might be wrong about the amount of steps on the primaries! So do your research, first, please. I DO know for sure from what I've seen and heard so far that stepped headers in general will audibly "sing" more than normal headers. If you look up the latest Maisteer video "how F1 sound is made" he explains it.
But as far as power goes, my research shows conflicting information on whether you should stick with only 1 step or multiple on the primaries. 1 step is seemingly almost always good, but more than 1, IDK. Good way to get more steps (for a better sound) is to have primaries and secondaries, though, which you do.
@Drunken_Hamster thanks, that’s interesting I’ll have a look into it.
Masterpiece, top quaility work 👏
Much appreciated
Been watching your vids for a min now. great beads and excellent craftsmanship! I've been thinking of venturing into custom exhaust work myself.
Question: Who is buying this? Are these just once a month fabs you do? Selling locally or do you get people from all over the country? Not trying to steal your business just trying to get some incite on how to start one. Any Info is greatly appreciated! Keep up the great work!
Thank you, I appreciate that. I don’t sell many of these but I would if I had more time as there is demand for them. Here in the Uk a lot go for the cheap Chinese made manifolds but there are quite a few good quality custom fab ones being made for those who want to pay more for better products.
I wish I could do stuff like this myself, looks amazing
Thanks. You can learn, I am self taught from RUclips videos like these.
☝🏻☝🏻✌🏽🍺🍺🍺
🍻👍🏼
Great content!
Thanks 👍🏼
Can you do more like this but show how you weld in the tight gaps between pipes like 4:26?
Plenty of stock out on the electrode and bit of a Torah angle!
I know it's a little too late but... The world's first UEL header for a K series would be an interesting project! 😁
Yes maybe 😃
@@Smffab Great work on this header by the way!
Thank you 🙏
Most of them are uel but arr sold as ul. Usually there is 20mm to 40mm difference on runners from the ones I have seen and uel sucks for power.
Good job
Thanks
Bellissimo lavoro, complimenti.
Posso avere i parametri della saldatura utilizzati. Grazie
Un saluto
GA
Thank you. 43amps for tube welds. 30 CFH for argon gas flow. Which welding parameters in particular?
Awesome work buddy, also wish I could get welds like yours with no back purge. Mine just contaminate to hell.
All these welds are fully back purged. Just not when tacking the parts together.
@@Smffab my mistake, just watched it back and seen the plugs. Must of missed them. Looks good fell. Awesome work.
Great work!
Thanks, appreciate the feedback. Hope you subscribe for more videos like this.
Nice !
very very good job ;-)
Thank you! Cheers!
exelente trabajo saludos
Thank you
🔥🔥
👍🏼👍🏼
GOOD JOB. tell me about your gas cup and who made it. I have some Pyrex one and I don't like them. To loose.
Thanks.
The gas cup is a Furick cup made by Michael Furick. The one I use the most is the FUPA 12. They have some funny names, you’ll know what I mean if you go check them out.
Looks like you made a replica of a Toda manifold.
Real nice.
Thanks.
You didn't show welding the pipes together on the last merge to the header flange. I weld the merges together after the other pipes are welded so you can get at the weld.
Nice work!
No sorry didn’t show that part, but as you can imagine there is limited access so I had to use more stickout and more torch angle and still managed to get a decent weld with full penetration.
@@Smffab Ok but that would be a tough weld with the limited access to the side of the pipes.
I make exhaust and 4 into 2 into 1 collector for it and I have jigs for each separate pipe as well as the collector. It is for a VW engine so the collector must slip onto the primaries but the collector is one piece when finished. I have found that welding each half together completely then the merge bend is the best for me but the merges are challenging with the long stick out and limited access.
Still a nice job.
I think I know what your saying. It’s interesting to know other techniques and method. Thanks
I wanna hear the souuunnnd! Also, if you ever decided to do a UEL, please do a 1-4 or 2-3 pair UEL instead of the traditional 1-2/3-4 pair. It can potentially sound more V8-like with the way I described as it would be mimicking an 82-86 Honda V65 Magna with a Kerker exhaust and no muffler. (I can post a link to a ~1min video if you're interested)
Sounds interesting, please share a link.
You can hear the sound, link below. Enjoy 👍🏼
ruclips.net/user/shortsAaEB4Ztkl5c?feature=share
@@SmffabFirst is a walkaround, idle, and rev. Second is a takeoff. Third is another guy's bike with a MAC header and custom stubby carbon muffler instead of the modified Kerker setup. ((Still a 4-into-1, though.))
ruclips.net/video/-_xiNxxZX7U/видео.html
ruclips.net/video/yVkOY1O0r7I/видео.html
ruclips.net/video/wCSo85uM_14/видео.html
Great work! Quick question where are you sourcing your tubing? I’ve ordered from a few different places haven’t really found the right spot yet. Saw in another comment your self taught that’s incredible. Keep it up.
Thank you! I get all my tube from a company called fabco.
Bravo ! Ma io non credo che i raccordi ai tubi tu li abbia tagliati a occhio... non hai voluto far vedere come li prepari, ok, a occhio e col pennrello puoi tagliare e costruire un tavolo in legno ;-)
La piastra alla testata era in ferro o in inox anche lei ? AISI 304 o 316 ?
Didn’t want to show everything as it would probably be a very long and boring video. I’ve tried to make it short but still include as many interesting and useful parts in the video as possible. Each piece is cut using horizontal bandsaw then finer adjustments made on a belt sander to get the fit up just right. The tube and flanges are all made from 304 stainless steel.
Супер!🤘
Thanks 🙏
top demais parabens
Thanks 🙏
Woooo
Thanks
Any chance you have another one im looking for a header 🤝🏼
Follow my instagram
Follow my instagram
wich weld settings you use ?
About 43 amps for tube
Tubes of equal length?
That’s the intention yeah
Égale longueur tube ??
Probably not perfectly but yeah that’s the intention
i am at the end of making same thing that looks like ugly MIG
That’s a shame
@@Smffab i think that tig welding is so superior in compare to mig,that it can look ugly and still can be welded good, i weld 1.6 mm thick ss316 pipe with 40A and 1 mm wire,and if i stay or go too slow, pool makes droplets inside and surface is uneven,that is why go a little faster and more heats up wire than pipe,so my weld looks like mound on pipe but it is strong and tested on car,of course purged
I use 43amps got 1.6mm stainless and dab every second so don’t hang about. Make sure you have good gas coverage and practice.
@@Smffab thanks, my weld usually looks gray to black but sometimes happens it looks gold-if i go slowly but it is a little difference to make hole, i use 10-13 liters in minute of argon, 9 cup
You never show how you bent any of the tubes.
I buy them already bent at various angles. Thanks
@@Smffab Got it. Thank you.
Happy to help.
corny movie shorts
Thanks 👍🏼
🔥🔥
Thanks
Good job
Thank you. If not already please subscribe for more videos like this. Check out some of my other videos and let me know what you think. 👍🏼