My .32 force pulls the wheels on my xl on demand. The smaller durations give a higher velocity at lower revs equating great bottom end for heavy trucks
Good and cheap 👍 sry dont know about the .46 but 25000 max rpm... not great, tons of tork for sure but i think a good .28 will spank the .46 check a Cen GST 7.7 cc video, these big nitro engines are not very impressive
@@TastyBRC a 28 will never surpass a 46 or a 50 not at all i tried lrp 32x waste of money ,no torque and you will burn this engine very quickly overheating .
@@olivierplayer1633 I'd like to see that, I've never been very impressed by the performance of these big motors with few and small ports (usually 3). But I would like to try, I'm looking to buy one of these .46 (at a good price) but I can't find one
I have a brand new hobao 30, i will make a review video soon, unfortunately i dont have 2 savages for a drag race. Hobao looks better but it is not the same price! Yes it is sad, there are few choices left since nova closed doors and picco doesn't make .28 anymore... Hobao, force, Sh. Picco .24 if you are looking for a good quality engine
@@TastyBRC I really fear that the next 5 years will be the end for basher Nitros and in the next 10 years the end of Nitros in general. I do run electrics, but I also have a Nitro for fun; electric becomes kinda stale after a while.
@@xXYannuschXx I also fear that nitro will disapear and that is why I didn't buy a new nitro car this year... rc's are si expensive and I don't know if I could still run them in the years to come. But on the other hand, nitro still strong in the US, wait and see...
@@TastyBRC Would be great having Nitro make a comeback, but with the current trend of RTRs and most newcomers even struggling with a LiPo charger, I dont see this happen sadly...
@@xXYannuschXx You know, nitro has already made a little come back (at a small scale), nitro is more popular these days thanks to youtube and guys like Hybrid, Mike, Woogie and also many racers like Rajaa and Ekj, I keep hope that it won't disappear
Any chance you can tell me factory carb settings.i got a used force .32 great shape but way out of wack for tune. I got it running in my Hobao sst. But I want to start tune from factory settings. It wont stay running rips fuel throttle then dies
Hello , just got a tamiya nitrage with force 32 engine , it had play on crank in tdc ,replaced brand new conrod and crank and there is still some play on conrod ,not as bad compare to before i replaced parts ,just conrod replacement reduced play alot but i feel like crank didnt do anything tbh, is it normal for this engines to chawe some wisual play on conrod? Can anyone relate ?
There is always a bit of play but if you find that despite the new conrod there is too much play, your crank pin may be worn out. Add me on messenger and send a video, let me check the play.
It wasnt too difficult to tune, not the easiest engine i tuned but its ok, also the engine needs to idle a bit higher than most 3.5s i run. I see that the kyosho neo runs a pullstart engine, so the force 32 should fit perfectly and would be a good upgrade to the stock kyosho engine.
Thanks for the video. I’m thinking about buying a force .38. Does anyone have any experience with that engine. I would send it off to have it modded just for the hell of it and see if they could mod it for a little more mid to top end.
Get a 32 or 36. The 38 is not worth modding but also is a problematic engine in the longer lifespan. I modded my 36 for more mid-high and its a beast! Currently destroying rubber on my 1/8 scale hobao 8.5 pro buggy😂
No I only have truggies and buggies. I have a few Novarossi 28’s and some romas and was thinking of getting something bigger just for fun. Curious if the force 32 or lrp 32 are similar in power. I’m gonna order the force this week and give it a try.
My .32 force pulls the wheels on my xl on demand.
The smaller durations give a higher velocity at lower revs equating great bottom end for heavy trucks
In my latest video im running a smaller pinion, much better bottom end, a lot more fun!
i tried the lrp32x on my mgt8 ,not worthit ,better stock 50 piston
Not bad for the price. It's same manufacturer as the hpi f4.6 but a bit bigger displacement on this one.
Hpi engines are good and easy engines, that's why i wanted to try this one. I will see in the long run but first impression is very good
looks like a very good motor ,any experience with the force 46R motor ?
Good and cheap 👍 sry dont know about the .46 but 25000 max rpm... not great, tons of tork for sure but i think a good .28 will spank the .46 check a Cen GST 7.7 cc video, these big nitro engines are not very impressive
@@TastyBRC i think the 46 engine is the best for a monstertruck ,lots of bottom torque ,put bigger pinion and you will have it all with 46force
@@TastyBRC a 28 will never surpass a 46 or a 50 not at all i tried lrp 32x waste of money ,no torque and you will burn this engine very quickly overheating .
@@olivierplayer1633 I'd like to see that, I've never been very impressed by the performance of these big motors with few and small ports (usually 3). But I would like to try, I'm looking to buy one of these .46 (at a good price) but I can't find one
Would be interesting to know how this engine compares to a Hobao Hyper 30. Sadly there arent many nitro engines bigger than .21 these days.
I have a brand new hobao 30, i will make a review video soon, unfortunately i dont have 2 savages for a drag race. Hobao looks better but it is not the same price! Yes it is sad, there are few choices left since nova closed doors and picco doesn't make .28 anymore... Hobao, force, Sh. Picco .24 if you are looking for a good quality engine
@@TastyBRC I really fear that the next 5 years will be the end for basher Nitros and in the next 10 years the end of Nitros in general.
I do run electrics, but I also have a Nitro for fun; electric becomes kinda stale after a while.
@@xXYannuschXx I also fear that nitro will disapear and that is why I didn't buy a new nitro car this year... rc's are si expensive and I don't know if I could still run them in the years to come. But on the other hand, nitro still strong in the US, wait and see...
@@TastyBRC Would be great having Nitro make a comeback, but with the current trend of RTRs and most newcomers even struggling with a LiPo charger, I dont see this happen sadly...
@@xXYannuschXx You know, nitro has already made a little come back (at a small scale), nitro is more popular these days thanks to youtube and guys like Hybrid, Mike, Woogie and also many racers like Rajaa and Ekj, I keep hope that it won't disappear
Any chance you can tell me factory carb settings.i got a used force .32 great shape but way out of wack for tune. I got it running in my Hobao sst. But I want to start tune from factory settings. It wont stay running rips fuel throttle then dies
Sorry cant help with factory settings, i can check mine but not sure it will help, my f32 is modded🤔
Hello , just got a tamiya nitrage with force 32 engine , it had play on crank in tdc ,replaced brand new conrod and crank and there is still some play on conrod ,not as bad compare to before i replaced parts ,just conrod replacement reduced play alot but i feel like crank didnt do anything tbh, is it normal for this engines to chawe some wisual play on conrod? Can anyone relate ?
There is always a bit of play but if you find that despite the new conrod there is too much play, your crank pin may be worn out. Add me on messenger and send a video, let me check the play.
Is it easy to tune? Did you think I can put a force 32 in a kyosho neo?
It wasnt too difficult to tune, not the easiest engine i tuned but its ok, also the engine needs to idle a bit higher than most 3.5s i run. I see that the kyosho neo runs a pullstart engine, so the force 32 should fit perfectly and would be a good upgrade to the stock kyosho engine.
What are you using for a thermo??
Very old turnigy infrared thermo, needs tape to hold in one piece after all these years😅
Can a .38 engine fit on a mugen seiki mxbr chassis?
Not sure! My .32 wont fit my TLR 3.0 as there is not enough clearance for the pullstart
I've done the very Same engine swap
I modified this engine since, next video with some extra power and rpm soon 💪
Thanks for the video. I’m thinking about buying a force .38. Does anyone have any experience with that engine. I would send it off to have it modded just for the hell of it and see if they could mod it for a little more mid to top end.
Thanks for watching! Force 36 is a good engine but i heard that the 38 is not.
Get a 32 or 36.
The 38 is not worth modding but also is a problematic engine in the longer lifespan.
I modded my 36 for more mid-high and its a beast! Currently destroying rubber on my 1/8 scale hobao 8.5 pro buggy😂
Thanks for the information. I’ll probably give the 36 a try and send it off for modding.
if you have monstertruck bye the force 46R best bottom brute force for wheelies most nm torque
No I only have truggies and buggies. I have a few Novarossi 28’s and some romas and was thinking of getting something bigger just for fun. Curious if the force 32 or lrp 32 are similar in power. I’m gonna order the force this week and give it a try.