Stock Stabs Sucks! Replacing my KBD67lite stabilizers with Durock V2s (Holee mod)!

This is a video about Durock v2 and C3 Equalz Stabilizers Soulmate kit!
C3 Equalz Stabilizers Soulmate kit:
swagkeys.com/collections/stab...
Music:
Startup - Auxjack
I Dream of Purple Unicorns - Christoffer Moe Ditlevsen
Nosso Choro - El Equipo Del Norte
Mic:
Sure Mv7

[@Rukkiiaa_YT]

might pick these up to try for future build thanks !

[@tanukey2339]

It's Fushigidane, not Fushigitane. Sorry about that!

[@SagaSynthetics]

This board is the sound I want! 😮😮

[@bennysaa]

Sounds so perfect. I‘m melting🫠

[@blackstars3720]

How you like these vs the stock stabs?

[@kevinliu7366]

I have a question. Does your plate mount a little higher because the stabs are screw in?

[@tanukey2339]

No it doesn’t.

[@IkEisawesome7]

I have used these for about a year now. Now when I press my spacebar it doesnt go up all the way. The switch is fine, the stabs are fine. They just seem to pull the space bar down. It's always been a little muddy but now it's stuggling to be used. I don't know why

[@theblocky2949]

Take out the stabs , clean the pads under stabs with alcohol pads and wipe away and excess lube on the stabs and put back and you r good😊

[@vert3387]

Hey I have a question my space bar stab is inserted the opposite way as it won’t fit the way u did in the video , will that affect anything ? Like the bar is making a “U shape” if that makes sense , like this |_|

[@asher217ify]

your space bar will be upside down

[@james_tiberius_kirk73]

So I bought this Kit on Amazon. There's nowhere near enough Stabs (etc) to complete even an ASUS Azoth. What am I missing? Do I have to buy *multiples* of this Kit to do a full keyboard?

[@BenedictTanShanWen]

Sus title. The stabs the 67lite came with are at least as good as my durock V2s if not smoother.

[@tonchok9488]

Which round r2? R1 came with cherry screw ins while r2 came with kbdfans screw ins

[@BenedictTanShanWen]

@@tonchok9488 R2.

[@tonchok9488]

@@BenedictTanShanWen ah then those are pretty good if not better than durock 2s i think this vid he had r1 but tbh idk

[@BenedictTanShanWen]

@@tonchok9488 It's a V3 PCB in October. So it can only be R2.

[@tonchok9488]

@@BenedictTanShanWen ah i c then idk cuz i haven't seen mine in a while sold lol

[@randalldesignd9857]

i love it!

[@polarspalace]

The kbd67 lites stabs are actually rlly good tho

[@ericwu8956]

Yes, they’re better than the cheap ones that come with your average prebuilt keyboard, but they’re ass compared to other screw in stabilizers pretty much.

[@JJ26071503]

You bought the soulmate kit which comes with holee/epsi mod materials then you proceeded to use bandaid for your holee modding? Lol

[@tanukey2339]

Because the bandaid removes the ticking more than the teflon tape that came with the kit. Lol

[@JJ26071503]

@@tanukey2339 oh alright haha

[@myulky]

why's the volume so low RIGHT at the sound test...

[@borja6551]

where did you buy the durock v2?

[@gabxln]

Aliexpress

[@chocken4867]

what is your method of wire balancing?

[@theblocky2949]

Place wire on glass and hold one side with finger and tap the other side . After put the slightly bent side on the edge of your desk and bend . Do the tapping but again and test if it's better 😊

[@brzrk2605]

How do i tune my rods?

[@asher217ify]

Like he did in the video.. did you even watch

[@RambleStorm]

A stock vs durock comparison would've been nice...

[@catscc122]

Kinda greedy

[@jamie8859gjbasdjkfgbnadfjklgh]

@@catscc122 yeah, seems outside the scope of this video