I only recently dug out my Tamiya The Hornet buggy, bought back in the 1980s. It still has the old mechanical speed controller and servos, which had since developed faults so bought this very esc to update my car. Haven’t installed it yet but watching your video now to gain an insight on how to install it and what it does ! 👍🏼
Hi Leons, in your video @ 3:12 you mentioned this ESC at 3S it will take max 18T. But the specifications of this ESC states - 3S Lipo or 9 NiMH 540 or 550 Size Motor: ≥18T Or RPM< 20000 @7.2V (≥ = Greater or equal to? that to me sounds like it requires 18T or more or am getting this wrong?). I have 550 15T Motor and want to know if it is safe.
Great video bud! These things are very reliable and smooth! I ve had mine for almost 3 years and I never had any issues and I just love it! Very nice esc! If you are still running the stock esc on the kanyon I highly recomend you put it on it. You wont regret it.
Thanks for making this video...I have a basic understanding of ESCs (and by that I mean what channel it plugs into hahaha)...I got this same model second hand with the aim of shoving it into my 6 wheel crawler. This vid helps me alot - well done buddy and thanks for doing this. 👍🙏😎
@@Leonsrchobbys Thanks bro...just spotted your 1080 vid so guess where I'm going next hahaha yeah sorry about that...have emailed you. Ta' fella 🇬🇧👊😎😊🙏👍
I've Took my out because as you said they go into Limp Mode and it Does my head in. Hope yours is Ok. 🤞 great unboxing and installation info Video Leon. 👍 keep safe and well brother 👍😎👍
I'm confused. You plugged one connector into the receiver... Does that mean the one connector is both sending commands to the speed controller AND sending power from the speed controller to power the receiver? All through channel 2 ?
@@bariscaveman mine beeps for a few seconds thats the start up sounds and letting you know it's all bound to the controller if yours is still beeping continuously it sounds like it's not bound to the controller 👍👊
On ebay, this is advertised as a crawler motor, and they use high turn motors of like 30+. I have an old reedy 19t motor that I put in a mini e revo. So if I only run 2s lipo, I would wreck this esc if I used it?
Yes, you can easily be fooled by fake ones being sold on Ebay as the real deal. Ask me how I know!! Mine burned up the very first time I tried it out. The default jumper position, for some reason, is NiMH. Watch for that and change it to lipo. Your clear plastic cover will kill air flow and cause more heat.
Thank you very much my friend I put a cap pack of it and now it's running fine and for the cover its ventilated on the top for airflow directly above the fan👍🤟😎🇬🇧👊😊
Hi, i want to use it in my wltoys 144001 1/14 scale buggy...If the black esc just as good as the red one??? also i have no idea how many poles the stock wltoys 550 motor is... i know it should handle 2s ,but i wanted to also run a 3s .... do you have any feed back on this? thanks for sharring.
@@Leonsrchobbys i do not want to go brushless since the stock motor is very good imo ..tons of torque... i think i found a brushed one on bg that should work well ...i has many reviews and seems to handle 3 well... i may just stick with my stock 1500 2s 20c batts... i got 30 mph with stock esc...i may get more speed with this esc since it seems to have a lot of punch according to the reviews...but even if its the same i can now use my good radio for better handling.. thanks
@@roadstar499 the only thing with the 1060 is ive had a few and ive had to buy a cap pack for them as there known for going to limp mode the cap pack sorted it out👊
@@Leonsrchobbys yeah i never researched moding esc's... i have soooo many for boats and planes... over 60 from 10 amp to 180 amp... also have maybe 12 burt out esc's from last 10 years in boats then planes... boats were the hardest...had batts and esc's catch fire...did a lot of swimming.lol
I only recently dug out my Tamiya The Hornet buggy, bought back in the 1980s. It still has the old mechanical speed controller and servos, which had since developed faults so bought this very esc to update my car. Haven’t installed it yet but watching your video now to gain an insight on how to install it and what it does ! 👍🏼
thank you my friend ive had plenty of mechanicals speed controls these are very good escs well worth the money do a great job and cheap too👍👊🇬🇧😎😊
Very nice unboxing and share my friend.
Can’t go wrong with hobbywing esc... I got one of these bad boys my self 😊👍🏼
thanks bro need to give it a good.test👍😊😎🇬🇧
Awesome video bro thanks for sharing. Can’t go wrong with hobbywing 😎👌
Thank you very much bro👍👊🇬🇧😊😎
Hi Leons, in your video @ 3:12 you mentioned this ESC at 3S it will take max 18T. But the specifications of this ESC states -
3S Lipo or 9 NiMH
540 or 550 Size Motor: ≥18T Or RPM< 20000 @7.2V (≥ = Greater or equal to? that to me sounds like it requires 18T or more or am getting this wrong?). I have 550 15T Motor and want to know if it is safe.
it should be I was running a 16T now has a 23T it's still fine🇬🇧😊😎👍
Nice brushed esc! Great review Leon! ✌️😎👍🤜🏼💥🤛🏼
Thank you very my friend and I really do need your address so I can get your parcel sent off tomorrow please email me😊🇬🇧👊👍
@@Leonsrchobbys I did send it to you Leon in a email but I will send it again my bro! Thanks man! 🤜🏼💥🤛🏼😎👍💯
Great video bud! These things are very reliable and smooth! I ve had mine for almost 3 years and I never had any issues and I just love it! Very nice esc! If you are still running the stock esc on the kanyon I highly recomend you put it on it. You wont regret it.
Thank you very much my friend I was thinking of getting the 1080 for the kanyon😎😊🇬🇧👊👍
nice review and great fitment in the rc
thanks brother hope your well👊👍😊😎🇬🇧
@@Leonsrchobbys your welcome and i am doing good,hope the same for you brother
Thanks for making this video...I have a basic understanding of ESCs (and by that I mean what channel it plugs into hahaha)...I got this same model second hand with the aim of shoving it into my 6 wheel crawler. This vid helps me alot - well done buddy and thanks for doing this.
👍🙏😎
Thank you very much mate for watching the 1080 is a proper crawler one is much better also I still need your address😂😂👍😊🇬🇧😎👊
@@Leonsrchobbys Thanks bro...just spotted your 1080 vid so guess where I'm going next hahaha
yeah sorry about that...have emailed you. Ta' fella
🇬🇧👊😎😊🙏👍
I've Took my out because as you said they go into Limp Mode and it Does my head in. Hope yours is Ok. 🤞 great unboxing and installation info Video Leon. 👍 keep safe and well brother 👍😎👍
thanks bro and sorry for the late reply👊👍😎🇬🇧😊
Nice car bro. Iv got 2 of theses they great escs bro. 👍 Nice video leon. 👍
thanks Gazz my friend hope your well🇬🇧😎😊👍👊
Nice going bro I run the 1080s in my rock crawlers these 1060 looks very smart to bro
thanks kirk mate im thinking of getting a 1080 for my kanyon🇬🇧😎😊👍👊
I'm confused. You plugged one connector into the receiver... Does that mean the one connector is both sending commands to the speed controller AND sending power from the speed controller to power the receiver? All through channel 2 ?
channel one servo channel 2esc👍👍
@@Leonsrchobbys Thank you for your reply.
So Channel 2 on the receiver is also accepting power from the esc?
Great review mate, I recognize that motor 😉 the tyres are looking great too and balloon up nicely lol 😂😂 👍😉🐿️
thanks lee mate good motor😂🇬🇧😎😊😊👍
Great vid pal will defiantly help me out cheer pal 👍👊
thanks mate just need to get it out🇬🇧😎😊👊👍
@@Leonsrchobbys Yh man can't wait to see it working pal 😁
@Leons rc hobbys I also have this esc and have a brushless a Surpass 2445 - 3600kv brushless motor attached to it is this ok, it works.
yh should be fine my friend👍🇬🇧😎🐿👊
Thanks for the video! I have the 1625 model and mine also beeps continuously as the motor turns. I find it annoying. Is there a way to turn it off ?
thank you my friend it should not keep on beeping👊👍😊🇬🇧🤟🤟
@@Leonsrchobbys Yes, but your ESC is also beeping in the video. How did the sound go away? Did you make some kind of calibration ?
@@bariscaveman mine beeps for a few seconds thats the start up sounds and letting you know it's all bound to the controller if yours is still beeping continuously it sounds like it's not bound to the controller 👍👊
Awesome video 🙏
thanks bro👍👊🇬🇧😊😎
Does this support Tamiya brushed motors 23 turns and over.
yh i thinks so You can Google the specs👍👍😊👊
Nice review 👍
thanks bro👊👍😊😎🇬🇧
@@Leonsrchobbys 🙂
My go to ESC :-)
Thank you very much my friend this is my first one👍👊🇬🇧😊😎
On ebay, this is advertised as a crawler motor, and they use high turn motors of like 30+. I have an old reedy 19t motor that I put in a mini e revo. So if I only run 2s lipo, I would wreck this esc if I used it?
It should be ok my friend and the maximum turn is a 12t on the ESC but before you take my word please check and Google it first👍🇬🇧😎😊👊
@@Leonsrchobbys thanks for responding! I have been looking everywhere and cant seem to find anything 😥
@@MrMuscleheart Put in on Google hobby wing 1060 instructions it just came up as a pdf file👍👍
Will it run an 8 turn motor ? I can't find one that'll run under 10 or 12.
I'm not sure but I think you can find the specs on Google👍👊😎😊🇬🇧
@@Leonsrchobbys thanks for answering
👍👍👍👍
Good video bro 💪🏻💪🏻🇳🇱👍🏻👌
Thank you very much bro😎😊🇬🇧👊👍
Is it worth putting this in the kanyon over the stock one and can I use stock motor
Yes my friend 100% it's fully programmable👍👊😊😎🇬🇧
ruclips.net/video/wyzBoPomUgU/видео.html
What connector does it have?
Standard tamiya connecter😊🤟👊👍
Btw i love your vid
And which plug do you have?
@@berkzy8016 plug for what ?👍
i just bought mine today and it won’t setup my steering trim is the only thing working does anyone know why and how to fix
it could be a faulty esc mate or check the jumpers and what battery type its on😊😊🇬🇧🇬🇧😎
Yes, you can easily be fooled by fake ones being sold on Ebay as the real deal. Ask me how I know!! Mine burned up the very first time I tried it out. The default jumper position, for some reason, is NiMH. Watch for that and change it to lipo. Your clear plastic cover will kill air flow and cause more heat.
Thank you very much my friend I put a cap pack of it and now it's running fine and for the cover its ventilated on the top for airflow directly above the fan👍🤟😎🇬🇧👊😊
Hi, i want to use it in my wltoys 144001 1/14 scale buggy...If the black esc just as good as the red one??? also i have no idea how many poles the stock wltoys 550 motor is... i know it should handle 2s ,but i wanted to also run a 3s .... do you have any feed back on this? thanks for sharring.
if you want to go brushless i wouldd go for a hobbywing 120a esc it can handle 4s all day and for polls if its brushless motor👊🇬🇧🤟👍😎😊
@@Leonsrchobbys i do not want to go brushless since the stock motor is very good imo ..tons of torque... i think i found a brushed one on bg that should work well ...i has many reviews and seems to handle 3 well... i may just stick with my stock 1500 2s 20c batts... i got 30 mph with stock esc...i may get more speed with this esc since it seems to have a lot of punch according to the reviews...but even if its the same i can now use my good radio for better handling.. thanks
@@roadstar499 the only thing with the 1060 is ive had a few and ive had to buy a cap pack for them as there known for going to limp mode the cap pack sorted it out👊
@@Leonsrchobbys yeah i never researched moding esc's... i have soooo many for boats and planes... over 60 from 10 amp to 180 amp... also have maybe 12 burt out esc's from last 10 years in boats then planes... boats were the hardest...had batts and esc's catch fire...did a lot of swimming.lol
Like, cool vidoe.
thanks bro👍👊😊😎🇬🇧
plug in power adapter type use?
standard tamiya connector 👍👍