Husqvarna Lawn Mower Carburetor Cleaning
HTML-код
- Опубликовано: 8 сен 2024
- #husquarna #lawnmowerrepair #lawnmower A quick video on cleaning the clogged carburetor on a Husquavarna lawn mower.
Get the items I use below:
Ethanol Tester: amzn.to/43QcAFQ
Carburetor Cleaner: amzn.to/43tIHv3
Lock and Lube no leak zerk adapter: amzn.to/3xVemZv
Caliper: amzn.to/3Lo67MM
DISCLAIMER: Not liable for anything you attempt after watching one of my videos. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!
![Run Away - Tzuyu(TWICE) ツウィ 쯔위 [Music Bank] | KBS WORLD TV 240906](http://i.ytimg.com/vi/KnHNNyAYiu0/mqdefault.jpg)
This helped me a lot, Thanks for the video!
I've got the same issue with the exact same mower. I appreciate the step by step process to remove and clean the carburetor.
I liked your video. You explained everything in detail which was exactly what I needed. I got my Husqvarna running again. Thanks a bunch.
I followed your advice and it did😢work. Not until I added a little gas to the carburetor then she fired up and I was able to cut my yard. THANK YOU!
I love your determination! I bet it will be running in no time.
Awesome job explaining the process.
Same here, followed step by step I work fine now! Thanks.
THANK YOU for such a detailed explanation! This was VERY helpful!
Thank you for your knowledge this particular mower, my husqvarna has the exact same issue. Thanks again 😊
Never seen so many utube mechanics as there are now 😊
I pulled out the jet inside the float bowl. It was plugged. Cleaned it with carburetor cleaner as well. Put it together like you said and it still doesn’t run. I have the fuel on., etc..
@@timjohnson9696 hope you got it figured out. If not- is gas getting into the carb and filling its bowl? The emulsion tube where the jet was in also has to be cleaned, there should be a hole from bottom to top into the Venturi the emulsion tube also has small holes in it sidewall that are hard to get to unless you remove the tube. Put fuel directly into the carb throat to make sure it will fire, if it fires then you have fuel delivery problem for sure. If it doesnt fire then check for spark, it may or may not be just the plug. Check the plug in another motor to see if it has spark before you condem it because it could be any other part of the spark generation system.
The first thing should be to make sure gas is coming thru the hose and getting to the carb, if not then fix why it isn’t, if yes then remove the carb.
Prior to taking off the carbureator for cleaning, I first drain and clean the fuel tank, and then use fresh non-ethanol gas. If it then starts, problem solved. If it the runs, you can then add 1/4 cup of 100% Acetone to a full tank of gas. Use the lawn mower as gou wouldnormally in cutting your grass. The Acetone mixture will thoroughly clean any deposits within the carbuerator, as well as carbon deposits.
@@jameswordenjr.7628 after working on too many to count non starting mowers, tillers, generators, if fuel is making it out of the tank and that fuel isn’t rank and rotten, I have never just put in new fuel and it fired up. I’ve always had to clean the jet and emulsion tube, sometime replace a rubber tipped needle or a rubber seat and boom they fire up.
best video ever thanks
Not sure why you didn't clean the gasket and the areas around it
Excellent. Thanks!
👍🇸🇰