What Does A Liquid Termite Treatment Look Like?
HTML-код
- Опубликовано: 28 авг 2024
- Check Out Our Website!~www.CantonGeorg...
Call Canton Termite and Pest Control Today at 770-479-1598 for a FREE Pest Consultation and FREE 58 Point Pest Analysis of your home. Ask for Tim McWhirter, Owner/President, and he will be happy speak with you. We are offering 3 Months FREE Home Pest Control Service. CALL TODAY!
He made this look so simple. Great job.
Very detailed ....best step by step I've seen so far. Words weren't even needed.
I'll be doing this soon as a preventative measure. What size bit should be used for concrete?
drill bit should be 12mm want to drill 75mm deep and you want to be 100-150mm off the wall and 200mm between each hole.
The trenching hurts your back more than the other stuff
Excellent
Nice!
I know this video is old and I'm sure a company that would even post this video for the world to see, won't respond but I am about to have this treatment done, and if this was my house, I would be very upset with the service, especially when this service (obviously depending where you live), is NOT cheap. It's obvious that you have to use a drill bit big enough to get your nozzle in there, so for some comments about that, nothing can be done to prevent that. I feel 100% the tech could have drilled the holes close to the house and not so far out in the open, he should have also swept up the dust before doing his treatment, it appears as if he did not use enough product as to my understanding, it's supposed to be 4 gallons per 10 linear feet and there's no way he used the proper amount. One of the holes in the concrete, he started to get pushback immediately and he just stopped pumping. Knowing nothing about concrete, I would think the rubber pieces or whatever they were that he put in the holes, SHOULD keep water out, but I think he could have used a bit more concrete to patch it up. I'm sure that with us seeing how sloppy the tech was with the home owners concrete, we can just assume that the trench dug along side the house didn't have enough product put in and the dirt/grass was probably put back half assed. Why even post this video to be honest...you as a company are satisfied with this tech's job performance? You're okay charging $1K+ for this type of performance? No way.
You have to go at least 4 to six inches out to avoid hitting a footing in the slab ,the plug can be matched by adding some of the drilled concrete into the patch mix which blends better after it cures
Have you ever tried to seal anything by filling the hole with continuous caulk or concrete ,you would use an entire tube of caulk on one hole.the cork gives the concrete patch something to grip onto and seal quicker
That is assuming too much when you assume you make an ass out of you and me(u and me
@@michaelmerck7576 This makes sense, I was not aware of how far you needed to be away from the house.
@@michaelmerck7576 I was referring to the amount he put on top of the plug to I’m guessing “cover” the plug up. He just put a small layer on there, more than likely leaving the plug still visible. My entire point of this wasn’t to try and hide the fact that you have termite damage/treatment because you’re required to list that when you go to sell your home. My main complaint was the fact that the liquid treatment is nearly $2,000 and I feel as if they were sloppy when performing the work, that’s all.
How much did this job cost?
500 and up
Atleast 1k+
1500
@@arizonarealtor6540 in 2022 it would start at about a thousand dollars and upward with more linear ft
Is the damage to concrete neccessary? I never seen anyone I know do that.
Uh yes
@@Josieman543 shut up and thank you.
You're the one that asked
@@Josieman543 its the way you answered it by saying "uh yeah" like you mean duh..
Ive never hammered the concrete but just jammed mini corks in the holes with a screwdriver then put cement
No crawlspace? Where was this?
There are houses built on slabs so the units are in the attic or upstairs. Also this house may of had a basement that didnt need any work done in it
Termite proof bricks or other materials available?
Not really
He left that concrete dusty af
8
Wrong gloves
Wrong eyewear
Each hole should be 10 secs depending on chemical
And there are rubber stoppers to keep chemicals in the hole and not run somewhere else
He didn’t even sweep up the concrete before treating
@@seana.5269 If you swept it first you are going to get it back in the holes ,you want to do when you start to patch the holes.ive never seen any tech sweep the holes before treating it's stupid to do so
@@michaelmerck7576 I treat every day and sweep before treating. Never have an issue with concrete dust blocking my drill holes, keeps concrete off my injector.
@@michaelmerck7576 Also sweeping after you treat, you get concrete powder over wet product. That can harden and block future treatments when re drilling holes. And if the injector gets a little product on the surrounding power it makes it harder to sweep.
@@michaelmerck7576 no you can definitely sweep before treating and it’s what you should do as long as you’re not negligent the hole will still take chemical
If you knock half of the dust you drilled out then yea the dust will block the chemical but you have to really suck for that to happen
💯💯💯💯💯💯💯
where's the flow meter? where's the graph? how much chemical was pumped? give this vid a d-
Those things are nice to have but once your able to maintain a seconds per gallon count then it’s fine. As a pest control professional, I’d just want to know what chemical was used.
@@freegibran some states it is mandatory
@@Visionspestsolutions2019 Agreed.
@Ed B Go stand in the corner.
@@freegibran I can tell you quite confidently he’s not putting 4 gallons per 10 linear feet. No matter the pressure used on his pump.