The ULTIMATE Nerf Hammershot Mod Guide (Vampshot Rev-5)
HTML-код
- Опубликовано: 19 авг 2013
- Review of stock blaster: • Review: The new Nerf Z...
In this video I outline and detail all the modifications that one can perform to increase the performance of the nerf hammershot from the zombie strike line. It includes, barrel to plunger seal improvement, teflon taped O-ring, regreasing, spring compression, dart post removal, and AR removal. Also, I try out a sweet new paintjob and it turns out well. All in all, very pleased with this one. 
Наука
so this is how his addiction of hammer shots started...........
Still going strong too :)
“Lemme just fold a jace, the mindsculptor”
Silver doesnt harm vampires, and I look exceptional in it. Most of my jewelry is sterling, I forge and store bullion in fine silver and I find it compliments the majority of my black and burgundy wardrobe well.
TLDR: Real vampires are not True Blood vampires.
LordDraconical nigga what
Are Hammershot springs compatible with the Hammerstorm?
This video definitely helped me and my cousin mod my new Hammershot that I recently recieved. Thank you for making videos like this one, it helps everyone out a lot
For the most part, I've recently lost interest in Nerf but I saw new videos from you in my subscription box and watched some of them. Your vids really makes me want to get back into modding
If I may humbly make a suggestion, mi'Lord, I recommend you make a series for people who want to start modding. A how-to, sort of.
Cheers Drac, I used this vid to do my first Nerf mod tonight. A successful exercise and I'm very pleased.
LOL I want the shirt, perfectly subtle!
this mod guide saved my life i was modding my hammershot and the return spring fell out and i did not know how to fix it but i saw it in this vid
Thx drac
does any body else just watch them doing mods because you dont have the time or money to do it
clorox bleach no u shouldn't of wasted your child hood
Nah... clorox bleach enjoyed his childhood a little too much... should have finished school.
BRODIEC Gaming right here buddie
Brodie Collins I’m doing my first mod today
@@sdgsgdgsdsdggsdsgd773 how did it go?
and which gun?
I think i may have been the only one to to watch the whole video,including the last part at the end when it says"anyone watch the whole video?" Drac you have a good sense of humor. : )
man that mod sledgehammer looks SO much cooler then it did before and you can hear the difference(atleast for me i could) from before and after you mod it
Wow that looks amazing drac!!
I've got some major moding to do on my Hammershot... thanks for the video and yes I did watch the whole video, I will probably be watching it a lot over time so I can get the mods down correctly and make each Hammershot blaster I get the best it can be...
i was waiting in excitement for this mod guide. i might do what i can to my hammershots.
Succinct. Which is what I like about your uploads. I watch bobololo for his goofy antics and NOM for technical insight. Welcome back Draconian!
Did my first mod today and this was the vid I used to do so.
Dart post removal, teflon taped and replaced the O-ring to a tighter fit, replaced the 6cm spring with a 7cm same compression strength to give the extra compression, regreased with white lithium and threw a bit in the trigger and hammer post, about to do an actual cloth wrap as well since I suck at leatherwork, holding that one with a bit of light epoxy. Didn't remove the AR because I enjoy dry firing it, though I might need to throw in a bit more grease since it's kind of sticking but other than that I'm super happy with it, It's now firing on par with a stock Ameri-spec blaster because the Aus-spec grey triggers suck xD Might get an OMW upgrade spring but I kinda like how it is now since I really only do plinking and not war-ing
I bought two of these today so i can dual wield! Love this gun!
That was the first time i heard the whistler dart whistle! That was awesome
Just thought I would share. So I found an easy and cheap spring compression trick for my HammerShot. I bought these hard rubber Cone Washers in the plumbing department at my local everything store. They were like $1.89 for four. Two large, and two smaller ones. One of the small ones fit right over the spring post easy peasy. They are about a 1/4 inch thick and it worked perfectly.
or you could just double a jolt spring over the stock spring
Just picked one up today, was wondering how it looked on the inside and possible mods etc for it.
Might remove the inner pegs and use a washer to mod it since i lack tools to do the other mods and a custom paint job. Definitely an impressive blaster. Nerf did a stellar job on this one.
thanks drac , when I saw you barely open your blaster, I had a detached piece and I saw where it was supposed to be , I thought mine would break.
My cousin has the same shirt you're wearing in the video! I was the only other one in our school who understood what it said.
I usually knock out the dart pins so I can use custom ammo that my friend builds that can biodegrade.
I love that shirt! It took me a minute to get it!
very nice. love them Whistler darts lol
Nice job!
I love your shirt! That's awesome!
I would have liked to see how you got the air restrictor out, as well as the pegs, but I loved it! Thank you!
just drill the pegs out
Your doing good drac keep it up
The new paint job looks realistic
Looks much better than before and the darts look faster
Yay your back!!!
The video is exactly the price of this gun at target 😂
Well that's super cheap
Oh wait that's probably USD. Still kinda cheap though.
Interesting fact. Most single action revolver firearms use a down strut hammer spring into the grip body, just like this nerf.
Love the shirt drac.
i watched it all cause ur awesome!
these, absolutely.
U should do giveaways :P your blasters are so epic.
Love your shirt!
With how the Hammershot can hold the slugs, maybe getting another Hammershot barrel and making it a detachable/pull-out barrel could let you make a shorter model that fits the slugs easier. It would also help for faster reloading in a way.
Of course I watched it all. I was wondering what you would do with it. Looks great! Too bad they actually don't do the load-out descriptions anymore.
In that little silver part on the bottom could be used to store an extra dart if you drilled out the screw pipe
Yes I did watch it all I missed the Fanger Red paint it just makes everything sexy
This actually a viable dual weilding revolver. awesome
Clever shirt Drac.
I'm thinking about getting one of these. Will the air restricter/dart pegs be removable with a modeling knife? Or special tools required for it, such as a drill.
both are great!
Yes Drac, I watched the whole video.
i found layered duct tape works well behind the spring as well. and was a bit easier than trying to fold and cut the magic card.
Got one of these. Gonna have to do this. And then grab another one and do it again, bc why not lol
Considering you like the hammershot so much, Hasbro lanced a rebelle repaint of the hammershot, but it comes with a holster, you could probably get the holster seperate, and it might be good for HVZ, if you decide to use the vampshot
Chris
i LOVE the internals on this thing, i think i wanna try making a single shot Dillinger type blaster from them as a side arm. Maybe just add a coupler on the end of the plunger tube and stick a removable barrel on the end. Might not increase range but accuracy should improve. Regardless, nerf should make a small (reflex) version of this blaster.
Is there more than one version of the Hammershot? I got mine a few weeks ago, and I'm modding it today, but there's a Reclaimer-shaped piece behind the air restrictor. Do I have to cut that piece out or can I work around it?
You said house, congrats Drac
Somehow, when I did Teflon tape to my plunger, the firing ranges decreased by a LOT. How long should the Teflon tape strip be?
I absolutely love the hammershot because its just a snapfire with less barrels and a compression spring.
love your channel just one thing if you can you should have a stock gun so you can do a side by side comparison if that isn't available maybe you can edit a before and after on the end
damnit all! I usually get those...having watched the series and such
Hey Drac, when will you do the Strongarm mod? I have been waiting for you to do it since the review.
He doesn’t like the strongarm. I am 6 year late yea
Great mod guide for a great blaster. I'm considering putting two UV LEDs in the top of the blaster (for use with some glow in the dark darts), on the front facing orange piece that sits to the side of the chamber, just below the tactical rail. In your dissection of the blaster, would you say there's enough room internally for wiring, a battery (or batteries), the LED's and a switch? Thanks!
I lost the little spring that is on the onside on that rail piece, wonder if I could replace that?
Caught the last part, of course we watch the whole thing.
So i modded mine, but when i shoot sometimes the barrel will not spin when i prime for the next shot, does that happen with yours? I know why it happens, the removal of the air restrictor made the hammer hit harder throwing the barrel out of alignment, but i'm not sure if it's just mine. thx
I like that shirt. Very funny stuff.
drac do you think there is a chance to do a fast clip mod to this blaster like with the old mavericks?
Oh my gosh it's the OG drak
i watched the whole video lord drac. I do agree that the hammershot might be the best nerf gun the year. though i am also a fan of the triad and strongarm.
Thank you for making this video relatively quick and painless. Every other video out there is some slow talking 'um um um and' 10 year old who's never heard of editing. 9.0. You should have done a before and after test-fire comparison though. I wanted to see that.
*Notices cup filled with red liquid* = Insert vampire joke here. =
i was looking at that beast in the Sear's x-mas catalog, looks like it could be a revamp of the old longshot
Aragorn124356 its not even close to being like a longshot
I watched the whole thing!
i watched the entire will u do a centurion review and
mod guide
Thanks. And one more thing. Orange Mod Works has springs on clearance right now. Another mod video suggested 5 kg Vulcan springs for a Triad mod. I was planning on getting 4 of them, but after watching the Ultimate Hammershot video, I couldn't get the card trick to work. So, what would be the largest kg of spring I could buy to put into my Hammershots?
You can actually compress the spring a bit more safely, about 2-3 more cards worth :p
Hey Drac, where do i send comissions to you?
I watched the whole vid, but i paused it b4 the paint job and ate supper :P
Hey Drac I need to know, how does one remove he air restrictor?
what type of grease did you use?
If you just add power to the spring do HAVE to take out the air restrictor. Will you get the same power as stock or not?
You should make a flintlock out of the hammer/firing mech
ofc
you can double a jolt spring over the stock spring for alot of extra power
that blaster is my favourite. because have great range and accuarcy.
Boom co is as accurate as the most accurate
+Brian L. No nerf rival as of now is the best in terms of unmodded power and accuracy
I like your shirt a lot.
i watched the whole video! :D
Love the shirt.
Haha love the shirt I wonder how many people figured it out that 10 in binary is 2.
Yes, I liked that as well.
how do I put the trigger and spring back in correctly any advice? thx!☺
I was always curious what your first zombie strike hammer shot mod was.
Hey Drac, Do you think that you could somehow make a quick-loader for it? or would the bar in front of the chambers prevent that?
When you take out the AR, how do you make the cylinder move automatically?
Haha drac's shirt in the end is funny. I understand it :p
Would it be possible to do a combination with the hammer shot and the long shot like you do with the maverick?
I was wondering, what do I do if my foam ring is falling off the tip of the plunger tube?
your shirt is awesome!!!
How do you cut the card? Whenever I try it either isn't accurate and doesn't work or the scissors won't cut the card...
An inquiry for you, my lord. Now that I have taken out the air restrictors and the dart pegs, is it safe to leave ammunition in the gun, since it the packaging previously advised against it?
yeah, always!
do i need to re greace the moving parts of is it optional?