A few months ago my modulus flywheels broke (it was the board). I took it apart and since I don't have a solder, I used duct tape and it now works better since I also removed the unessessary switches
One of the features that I absolutely adore about the modulus is how, after firing and releasing the rev trigger, it automatically stops the motors. The problem is that I am unaware of how to keep said function and making it fire just like in this video
Drag I have a challenge for u, take apart a stryfe or modulus then take everything out, the use ur own tools to try to build it hand made(don't use original pieces!). Like if u want him to try this!
The Modulus pushrod mechanism sometimes throws a dart up instead of forward. At least that's my experience. It could be that when the mag is loaded, the top round hits the side and moves up above the top of the mag a little. This could angle the tip of the dart higher than the barrel entrance. Trigger pull pushes the top dart up further, could cause a missed fire, could just send round #2 downrange first. Since you have to push a little (relatively) to add a dart to the mag straight down, the top dart can't re load itself once it's out and stays above. Perhaps adding something that prevents darts (or at least the tips) from travelling above the barrel entrance would solve the issue. Untested hypothesis though, so ymmv
I'm 14, tried removing the locks and circuitry from my blaster and totally fucked it up. We're kinda poor so this is all I got. Luckily I found this video to fix my blaster. Thanks Drac!
I like the jam door lock, I do feel there needs to be a lock in which the jam door is open and the rev switch is depressed it locks the trigger, I found that a problem when I first got it as the blaster got jammed.
I really liked your mod guide for the modulus. I've recently made my modulus red and flat black and rewired it completely. so i would like to THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:)
So non-nerfer here. I gave my friend all my nerf guns, but recently, been invited to a bunch of nerf 'parties' and stuff, so I thought I should go out and buy a blaster. I'm thinking about the Modulus, as it seems to suite the purpose of my team's need (none of us have nerf guns yet, still in the buying area). I remember from my old nerf days that modding was a must, so a few questions: 1) Overall, besides wire, did you need to buy anything? 2) How effective is this 'mod'? I'm glad nerf has finally caught up to buzzbee in the flywheel business! (I had the Thomson 20 by BB and it was amazing way back like 10 years ago) 3) Would adding weight to the foregrip be more effective in this mod to reduce drag and lift from shots?
Hey drac, attempting my own mods on this kind of blaster. Just curious, i'm wanting to use a better microswitch for the rev trigger, what type do you recommend? Also what lipo would you recommend? I want the best of the best.
hey guys. if you want a fix for your jamming modulus simply put a 1 inch piece of sellatape on the top of the bullet clip. this stops the top bullet popping out and jamming. wrap the piece of tape across the top effectively enclosing the front end of the clip. When you load the bullets you just push them in from the back, put your finger on the rubber end push down and then load the next bullet by pushing it in from the back. job done. 80% reduction in jams for the price of 1 piece of tape!!
Lol earlier today j was trying to spot out the locks through the clip area and saw a dart stuck in the dead space behind the jam door took the thing apart and learned a lot about this gun
im curious why you do work on the floor rather than on a desk or an uncarpeted floor? my back starts to hurt after about an hour of sitting and bending down.
Without the locks, there really isn't a reason to have the jam door. It's much more satisfying(for me, anyway)to watch the darts feed into the flywheels as the blaster fires. Maybe I'm just weird, though. 👉💩👈
As a firefighter I've seen first hand how dangerous LiPo batteries are and what they can do. I don't trust them at all therefore I'm leaving the original batteries.
+AJ Calacci LiPos can be dangerous if you are incompetent with them, but that is the same with every battery. LiPos are just a little more touchy. I'd suggest for you to use some L-Ion IMRs if you want to upgrade stuff like that without the risk. Just make sure to have a charger with a limiter.
I know this is old but what are the double a sized lipos you are using? I've heard that you can use two in stock configuration for slightly better performance but I'm not sure? I also wouldn't mind running three of those after I work up the nerve to try a rewire as I actually like this blaster and would like to be able to switch to the stock FPS when I play with my nephews.
Im trying to unscrew the modulus stock, but the screws won't move out of their position. I really want to fix this stock so it is sturdy and can fit on all my blasters, can you help?
would i need to make any changes to my modulus electronic-wise if i want to run trustfire batteries? or can i just run on stock internals and keep using the 3 trusts and a dummy
dont mean to be rude "entre name here" but, if you cant work out the locks or how to push the motor out... maybe u are not mechanically inclined enough to modify blasters. its a very very simple DC circuit, in fact highschool student make more advanced circuits.... soo if you are struggling with this and expect a highly detailed step by step video ya wasting your time, Drac cant hold everyone's hand
can a nerf modulus motor handle 4 imr's? I want to run 4 3000 maH 40A 3.7v imr batteries in my nerf modulus which is comepletely rewired with no voltage resistance or electronic locks the circut is just the negative going straight from the motors to the battery tray and the positive going from the motors to the button switch then another wire on the button switch going to the positive lead on the battery tray. I want to know if the motor will be ok with the 4 imr’s of the electric specifications i mentioned earlier.
I'm making a P-90 styled nerd gun but don't have a rayven. On Amazon they are going for around $100, but I don't have that much right now. Where is the best place to get one? P.S. (I'm already spending $600 for a 3D printer so I can make a custom parts store.)
Drac!!! Nice video dude. Me and my kid just got hooked to nerf guns. Hes 5 and im a young 35yr old man trying to keep up with him. I am not electrically inclined. This mod would be hard for me to do. Any way you could help a fellow nerf enthusiast!? I couldnt find you on Ebay. Id love to buy a modified gun or two from you.
I modded mine but my accuracy went bruh. Help?
Dont use nerf elite darts use waffle head darts
Use real bullets in a real gun trust me it works better
It went *bruh* ?😆
Just unbruh your nerf darts
A few months ago my modulus flywheels broke (it was the board). I took it apart and since I don't have a solder, I used duct tape and it now works better since I also removed the unessessary switches
2 in one day? AWESOME
One of the features that I absolutely adore about the modulus is how, after firing and releasing the rev trigger, it automatically stops the motors. The problem is that I am unaware of how to keep said function and making it fire just like in this video
late response lol. Thats called motor braking, its really simple. all you need is 1 wire, you should google it
replace green details with orange for asiimov!
Sooo... it's not actually a reshelled Stryfe, then?
Yes
I wouldn't say that. You're making it sound like its a scam, lol.
not at all... the internails are different....
Ya to be honest i think the ecs-10 has better firepower than the stryfe
@@cjguitars317 It does I wanted switch all the components into the stryfe so it's not as top heavy and use it as a better stryfe.
Drag I have a challenge for u, take apart a stryfe or modulus then take everything out, the use ur own tools to try to build it hand made(don't use original pieces!). Like if u want him to try this!
That's pretty much what he does with a lot of his work like the motors, wiring, and lock removal
Sooooo... Sanguine?
thank you so much i just did my first mod thanks to you and someone else
Did a dart fall out of the gun at about 7:22?
+josh hightower yes
+josh hightower Haha yep
yea
josh hightower yes it did, and he probally didnt notice ethier
The Modulus pushrod mechanism sometimes throws a dart up instead of forward. At least that's my experience.
It could be that when the mag is loaded, the top round hits the side and moves up above the top of the mag a little. This could angle the tip of the dart higher than the barrel entrance. Trigger pull pushes the top dart up further, could cause a missed fire, could just send round #2 downrange first. Since you have to push a little (relatively) to add a dart to the mag straight down, the top dart can't re load itself once it's out and stays above.
Perhaps adding something that prevents darts (or at least the tips) from travelling above the barrel entrance would solve the issue.
Untested hypothesis though, so ymmv
What no paint before you eBay it off? :( Or a nice digital camo hydrographics dip
Drac Did you know that pringle can lids are awesome for temporary screw storage
Good idea!
I'm 14, tried removing the locks and circuitry from my blaster and totally fucked it up. We're kinda poor so this is all I got. Luckily I found this video to fix my blaster. Thanks Drac!
I'm 13 and I did it fine
I am 12 and I did it fine
I need help!!
How do u retire this thing?
The rev switch has three ports!?
Yes, the MODulus works well for it :)
I like the jam door lock, I do feel there needs to be a lock in which the jam door is open and the rev switch is depressed it locks the trigger, I found that a problem when I first got it as the blaster got jammed.
You are the only nerfer to turn to for awesome mod guides :)
I really liked your mod guide for the modulus. I've recently made my modulus red and flat black and rewired it completely. so i would like to THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:)
I liked the part of your video when you used the alugator teeth to complete the circuit and shot the dart!!
Drac,I have a simple question:what company of copper wire do you use and what is its diameter
A bit late but copper is copper, not rlly much different
So non-nerfer here. I gave my friend all my nerf guns, but recently, been invited to a bunch of nerf 'parties' and stuff, so I thought I should go out and buy a blaster. I'm thinking about the Modulus, as it seems to suite the purpose of my team's need (none of us have nerf guns yet, still in the buying area). I remember from my old nerf days that modding was a must, so a few questions:
1) Overall, besides wire, did you need to buy anything?
2) How effective is this 'mod'? I'm glad nerf has finally caught up to buzzbee in the flywheel business! (I had the Thomson 20 by BB and it was amazing way back like 10 years ago)
3) Would adding weight to the foregrip be more effective in this mod to reduce drag and lift from shots?
Hi Drac, your mods are dope
Wait, wait wait!?!?!? Wtf?! AA sized LiPos??!!? Where the hell did you get that?!
He meant ultra fires
Hey drac, attempting my own mods on this kind of blaster. Just curious, i'm wanting to use a better microswitch for the rev trigger, what type do you recommend? Also what lipo would you recommend? I want the best of the best.
hey guys. if you want a fix for your jamming modulus simply put a 1 inch piece of sellatape on the top of the bullet clip. this stops the top bullet popping out and jamming. wrap the piece of tape across the top effectively enclosing the front end of the clip. When you load the bullets you just push them in from the back, put your finger on the rubber end push down and then load the next bullet by pushing it in from the back. job done. 80% reduction in jams for the price of 1 piece of tape!!
+Funk doobies they are call magazines, not bullet clips. I DUB FUNK DOOBIES, A SCRUB
Lol earlier today j was trying to spot out the locks through the clip area and saw a dart stuck in the dead space behind the jam door took the thing apart and learned a lot about this gun
im curious why you do work on the floor rather than on a desk or an uncarpeted floor? my back starts to hurt after about an hour of sitting and bending down.
do you ship to Belgium ?
Hey Drac, can you make your mod guides more user-friendly!
Looks like you could put an xsw select fire kit for the stryfe in there just fine...
I needed this to replace the battery compartment since it corroded
I may do this mod when I get mine. Also, is there a way to make the praxis stock less wobbly (reinforce it)?
Unscrew it and cover the wobbly plastic sticks with pvc pipes
Juel Bomb i saw the same thing on mag121s modding video
LordDraconical, I want you to make a Terraria Clockwork Assault Rifle if possible.
This helped a lot, thanks (:
Question Drac...
That little plastic "curtain" that goes over the entryway to the flywheels - do you take that off or leave it?
+Googerstein You should take it off, it can cause darts to get stuck and jam it more than it already was.
Drac calm down not even half of us have it yet
Great mod keep up the good work
Without the locks, there really isn't a reason to have the jam door. It's much more satisfying(for me, anyway)to watch the darts feed into the flywheels as the blaster fires. Maybe I'm just weird, though. 👉💩👈
+David Lowe i take the door off also on all my guns
Flimsy modulus stock? Rap the connectors with duct tape. Easy fix as you probably own duct tape.
This saved my blaster
Only $45 on modded while unmodded is $100.Buying this
I paused at 6:16 to say that the flywheels would make a good sidearm.
hey drac I was wondering how you keep the tactical rail lock on
you don't need to remove the thermester in the modulus as it does not have one
Would the performance change if I used normal aa alkaline batteries
Did you end up changing the motors? If so what are the motors called. What brand of aa lipo batterys are they and what is the mAh and volts
+Hunter Barroco I'm pretty sure he meant UltraFires, not lipos.
+HomeSchooledNerfer or LiFePos
thx
Would it be safe to put in 4 imrs? If so what wires should I use?
have you ever thought of using locks for sights or mix them with hot glue to make a glue plastic i have and its sorta useful but have you
Drac, have you seen MTB's leak and review of the Lawbringer? Its like a Hammershot, but better.
As a firefighter I've seen first hand how dangerous LiPo batteries are and what they can do. I don't trust them at all therefore I'm leaving the original batteries.
+AJ Calacci LiPos can be dangerous if you are incompetent with them, but that is the same with every battery. LiPos are just a little more touchy.
I'd suggest for you to use some L-Ion IMRs if you want to upgrade stuff like that without the risk. Just make sure to have a charger with a limiter.
I have a LiPo in my room right next to me
AJ Calacci ikr lipos are a little dangerous with kids toys, but imrs are totally fine
What would be the best motors to choose, if you're wanting to upgrade those? It's mentioned in here, but it's not actually done.
Drac u should paint 1 I would like to see that
Drac did you know that half the blasters that you do never make it to Montana?
I'm doing this for a friend, shouldn't be too hard.
Drac you got me into modding nerf guns i modded my maverick were the drum comes out
Drac can you make me a need raven thats purple and blue or modulus thats green and blue
I know this is old but what are the double a sized lipos you are using? I've heard that you can use two in stock configuration for slightly better performance but I'm not sure? I also wouldn't mind running three of those after I work up the nerve to try a rewire as I actually like this blaster and would like to be able to switch to the stock FPS when I play with my nephews.
Im trying to unscrew the modulus stock, but the screws won't move out of their position. I really want to fix this stock so it is sturdy and can fit on all my blasters, can you help?
Drac could you please paint a cs-6 deploy like a bad ass rifle
Is there a place you'd recommend ordering those motors from online? I don't have any shops that sell those locally.
Is it necessary to use Lithium batteries to get an increase in performance with this mod? Were the motors changed?
Would have been cool to make a double stryfe that had 2 sets of flywheels....
I took off the rubber flaps on the fly cage
so did you replace the motors or used the stock ones?
and how high voltage can the stock wiring take once I have removed the thermistor?
I would like to know rewiring the rev trigger is it still blue and wight if you could cover that that would be awesome or post it up .
would i need to make any changes to my modulus electronic-wise if i want to run trustfire batteries? or can i just run on stock internals and keep using the 3 trusts and a dummy
I'd love to have this
and whats the range with this mod?
drac is that true that it fires at 100 fps because a lot of youtubers try to mod such like mag 212 and still just 20 fps improved
Dear lord draconical do you still have the hand-dos from the zombie crossbow
what motors do you use for your upgrades and where can i find em i looked on evay and realised i had no idea what size or type i need
Link to batteries? They seem really good
This just broke my gun.
dont mean to be rude "entre name here" but, if you cant work out the locks or how to push the motor out... maybe u are not mechanically inclined enough to modify blasters.
its a very very simple DC circuit, in fact highschool student make more advanced circuits.... soo if you are struggling with this and expect a highly detailed step by step video ya wasting your time, Drac cant hold everyone's hand
DRAC would it be possible to make a 3 round burst clip fed flywheel gun???
I could imagine how that would work. Clockwork.
+Charlie Looney You could use arduino if you know how to program them.
That is a great idea! That way I can get my Clockwork assault Rifle! (points for you if you catch the reference.)
It is not a clip it is a magazine
can a nerf modulus motor handle 4 imr's? I want to run 4 3000 maH 40A 3.7v imr batteries in my nerf modulus which is comepletely rewired with no voltage resistance or electronic locks the circut is just the negative going straight from the motors to the battery tray and the positive going from the motors to the button switch then another wire on the button switch going to the positive lead on the battery tray. I want to know if the motor will be ok with the 4 imr’s of the electric specifications i mentioned earlier.
Where can I find the kind of batteries you use at the end. I just got a modulus ecs-10 and want to mod it. Oh I'm in Canada
i want to start my first mod what blaster do you think I should start with thanks drac
I'm making a P-90 styled nerd gun but don't have a rayven. On Amazon they are going for around $100, but I don't have that much right now. Where is the best place to get one? P.S. (I'm already spending $600 for a 3D printer so I can make a custom parts store.)
i have a question sir . is it okay to change to neo rhino motors but my source of power is eneloop battery?
Do you still have to use the small flywheel trigger
what gauge wire do you utilize for your rewires, it appears to be 20ga, 20ga at the smallest?
Should I put two trustfires in or 3 ultrafires in
Is this likely to cause excess wear , and faster breakdown of the blaster?
Motors will break die faster and batteries will run out way quicker.
Drac did you already put this up on eBay?
Drac!!! Nice video dude. Me and my kid just got hooked to nerf guns. Hes 5 and im a young 35yr old man trying to keep up with him. I am not electrically inclined. This mod would be hard for me to do. Any way you could help a fellow nerf enthusiast!? I couldnt find you on Ebay. Id love to buy a modified gun or two from you.
Does removing the electronic locks enhance performance?
Are the flywheel wheels bigger than the previous versions?
Drac, what is the maximum voltage the modulus can hold without any internal modification?
Do you have a link to the batteries you use for the gun
Hey Drac! I have a question. Which flywheel motor is better Stryfe or Modulus?
+6Brosinc. modulus is very better
+İsmail Saklamaz No way, it is larger and more expensive, yet has the same ranges
+İsmail Saklamaz no way it's stryfe feta stock and modded but modulus is more fun with the attachments
+FT George *better
Ok
Hey Drac. Can you put a Vid of put the Retaliator internals back together, cause I can't get mine together.
How much would I have to pay for a olivian rifle drag
Dear Lord Draconical do we have to pay you to make us custom Nerf guns
is there a way u can trade my modulus with your upgraded one but give you like 5 bucks moor
what happens if you run 2 Li-Pos and 2 dummy batteries?
I ran into a problem when taking off the flywheel resistors where I accidentally ripped off the prongs,could anyone please help?
can stock motors handle a 3s LiPo? if so, souls I have it revved for a long time?
why do you need to remove the resistors
I hate how it takes so long to unscrew the screws!
Of couse is easy to paint that's why it's called a MOUDULUS