Thank you - clear as day. I can’t believe I did this by myself. I just accomplished this with my frame. It was so annoying that I couldn’t sleep and always getting cricks in my neck!! Now that I’ve done this I can rest peacefully again. Thank you for this information. I didn’t know if I was going to get a new bed or not! I appreciate this
You are our hero!! We don’t have a remote for our bed any more and some time during the day, it lifted itself up. We are going to follow your instructions and pray we don’t have to sleep in our recliners.
I spent $150 on a matching remote that did not make the feet part of my bed go down. This video solved this problem for me relatively quickly and without having to ask anyone else for help! Thank you!
Thought my bed was stuck in the up position but it was actually stuck on my new headboard that is unattached. haha. The video still helped so thank you!
Thank you! I have slept with the head end lifted for over a year! Sparks came from motor so I was afraid to plug it back in. I tried the 8v battery override. Nope. I put the mattress sideways so there’d not be much weight on the base if it fell. To be extra safe, I put pillows between the frame and the base. I remove the pins and it went down, easy-peasy! I miss my adjustable frame, but I’m happy to be lying flat again!
I am going to try that. My son's is stuck in head up and feet . We had electrical problems throughout house. Have hunted all over for something. Thanks
Any tips on how a 70 year old woman with osteoporosis of the back can tilt the frame by herself without having to hire/pay someone to do it. I tried to wriggle under the bed but I don't fit. Could a few car jacks work? I just have to get to the box. I'm a bit fearful of getting crushed though. I don't have the physical strength to lift it myself. I can't risk another collapsed vertebra either. I think these beds might be a poor choice for seniors on a budget who can't lift such heavy frames or fit under them. Putting that stuff under the bed is a significant design flaw for people without friends and families. Just a consideration before you buy. Ideas anyone? Ideas that don't take more than 20 bucks from my budget please. I don't think it would have to go 45' tilt but just enough to let me under...a foot ot so. Would I need cinder blocks for safety crash prevention? and would I need a jack for each section of the bed (3)?
You should be able to lift the top half of you platform bed you then can use something to keep it propped up so it don't fall back after you do as he has shown My bed is stuck I'm about a 3 + inch lift and my neck and ares are terribly painful after months of this np remedy What needs to be placed under there is like what they make to keep car hoods up That needs to be worked in the design You are right that is a flaw toward self help or for the pros It's impossible getting in touch with manufacturers er 30 min on phone on hold I hung up tomorrow another day. The base company makes the mattress seller look bad bc they don't give much help after that You are right they are so heavy you can't break it down by yourself only solution is take the motor and mechanism apart once you can get someone to hold the base part up from falling back or down Mine is 3in stuck I need the thing lifted and held either way its a 2 person job?too heavy to rest on your arm or should er to get down their too heavy to turn the unit on its side
Is there a better motor to replace the lineal motor with?….What’s a good motor that you don’t see a lot of “stuck” issues with?…Is there a way to maintenance a motor to keep it working well?
My Serta won't go up but the massager works fine with the remote. I have a battery operated remote. I really need for the head and foot part to work again. In the past if I left it alone and once in awhile when I tried it would happen to work a time or two. What do you think is going on with it? Thank you.
Hi. What do I if my adjustable lumbar support is stuck in the up position. My bed is now shaped like a V. The other features controlled by the remote on the bed work. I have tried unplugging and plugging the bed back in. I have checked the remote batteries and I have looked under the bed to try to see if everything is plugged in.
Hey Keith, I’ve got a family members bed stuck in the up position. It’s a Rotec series 2000 multi position bed. It’s also stuck in the up position. How can I get it to work? Please help. Thanks.
My adjustable bed just stopped working last week. I've only had it since Feb. I tried replacing the batteries in the remote, unplugging and replugging in, as well the same but into a different outlet. I was using a surge protector as indicated with purchase. I am not sure what happened or what else to try. Can you help?
I was worried that we were going to be forced to do this when our remote stopped working but I looked up the manual online and found out our base can connect to our phones with bluetooth, it was a real lifesaver
I have an orthomatic bed - the wheels which move the frame as the motor works are broken. Motor works, bed wont move. Where can I find replacements rollers
I had to replace the motor for my dads bed for this exact reason, but it got stuck again as I put it in the up position to test it. Any advice what I should do?
The pillow-tilt adjustment is stuck in the up position on a two day old L&P Prodigy 2.0...can I test whether it is motor or box by switching with one of the other motor plugs or does pillow-tilt motor have a different voltage?
Barry Druhan you need to call L&P and have one of our techs come out and repair. While covered under warranty, I’d advise you to NOT switch plugs and test. Yes, voltage may be different so let a tech repair it.
The head part of my bed adjusts up and down just fine but the foot part won't go up all the way anymore. It does go up some.. Just not all the way. Any suggestions /ideas?
Hi Rick, the problem is the limit switch inside motor is defective. The motor will need replaced. Call us for further help with a new motor @ 615-336-2875.
Victor Moran , It sounds like the foot motor has failed and will need replaced. A simple test by switching the motor plugs around on the control box will confirm if the motor or control box is bad. Call us @ 615-336-2875 if you need more personalized service and help.
The Adjustable Bed Doctor we have an ergomotion bed. My husband's foot part will go up but won't go down. Head works fine. I've released the cotter pin so he can at least lay flat. What's the cheapest and easiest fix? Thx
Does Reverie have any customer support? I have been calling and leaving my name & phone number for three days. So far nothing from Reverie. Customer support must be lost.
Scott Puryear I’m currently having the same issue with Reverie horrible customer service last night my 6 month old base stopped working it won’t pair to the remote I even tried my friend’s exact remote with no luck . Now is seems like Reverie ha outsourced their customer service, they would take your information but good luck getting a call back. They are the worst, never again.
Thanks Keith.. my bed squeaks when I put it up and down. I’m 73 and live alone so I won’t be able to flip it over like you did on this video. But before I spend money to get a repairman out here what do you suspect the problems is. Something a little WD40 can fix.
I do not believe you'll need a repairman for that. But you'll need to isolate the squeak and use ONLY a silicone lube. WD40 is water based and won't work too well. Good Lick!
My adjustable bed remote control just died in the UP position. Solution, pull out the power supply, wait 20 seconds and replug it. The bed automatically goes back to the flat position. Hope yours do to :)
Thank you. 6yr old upload still helping get the job done in 2022.
Thank you - clear as day. I can’t believe I did this by myself. I just accomplished this with my frame. It was so annoying that I couldn’t sleep and always getting cricks in my neck!! Now that I’ve done this I can rest peacefully again. Thank you for this information. I didn’t know if I was going to get a new bed or not! I appreciate this
You are our hero!! We don’t have a remote for our bed any more and some time during the day, it lifted itself up. We are going to follow your instructions and pray we don’t have to sleep in our recliners.
Thank you so much I've been sleeping with my bed up for a couple of months,
you helped me to sleep normal again
I spent $150 on a matching remote that did not make the feet part of my bed go down. This video solved this problem for me relatively quickly and without having to ask anyone else for help! Thank you!
Thought my bed was stuck in the up position but it was actually stuck on my new headboard that is unattached. haha. The video still helped so thank you!
Thanks man, I'd call you if I was in your area but I'm from Croatia. Really helped me out!
This helped me when my sons bed got stuck up and would not go back down!
Thank you, i really appreciate this video.It just saved my night!
Thank you!!! You just saved me from a night in the couch
Thank you worked perfectly
Warranty making us wait forever. Been sleeping on floor. You saved our backs.
Thank you! I have slept with the head end lifted for over a year! Sparks came from motor so I was afraid to plug it back in. I tried the 8v battery override. Nope.
I put the mattress sideways so there’d not be much weight on the base if it fell. To be extra safe, I put pillows between the frame and the base. I remove the pins and it went down, easy-peasy!
I miss my adjustable frame, but I’m happy to be lying flat again!
Glad you found our videos to be helpful.
thank you so much for this now i wont have to sleep sitting up till i find someone to fix the issue
Hi Odette, you are very welcome! Please contact us if you need parts or service on your bed. 615-336-2875
Thank yo so much this worked perfectly now I can sleep in my bed until it gets fixed
Thank you SOO MUCH!!!!❤
Thank you that worked
Thank you
The head of my bed moves but stops about 10 degrees short if flat. Not binding and have tried every hack short of this. Will give it a try.
I am going to try that. My son's is stuck in head up and feet . We had electrical problems throughout house. Have hunted all over for something. Thanks
Any tips on how a 70 year old woman with osteoporosis of the back can tilt the frame by herself without having to hire/pay someone to do it. I tried to wriggle under the bed but I don't fit. Could a few car jacks work? I just have to get to the box. I'm a bit fearful of getting crushed though. I don't have the physical strength to lift it myself. I can't risk another collapsed vertebra either.
I think these beds might be a poor choice for seniors on a budget who can't lift such heavy frames or fit under them. Putting that stuff under the bed is a significant design flaw for people without friends and families. Just a consideration before you buy. Ideas anyone? Ideas that don't take more than 20 bucks from my budget please. I don't think it would have to go 45' tilt but just enough to let me under...a foot ot so. Would I need cinder blocks for safety crash prevention? and would I need a jack for each section of the bed (3)?
You should be able to lift the top half of you platform bed you then can use something to keep it propped up so it don't fall back after you do as he has shown My bed is stuck I'm about a 3 + inch lift and my neck and ares are terribly painful after months of this np remedy What needs to be placed under there is like what they make to keep car hoods up That needs to be worked in the design You are right that is a flaw toward self help or for the pros It's impossible getting in touch with manufacturers er 30 min on phone on hold I hung up tomorrow another day. The base company makes the mattress seller look bad bc they don't give much help after that You are right they are so heavy you can't break it down by yourself only solution is take the motor and mechanism apart once you can get someone to hold the base part up from falling back or down Mine is 3in stuck I need the thing lifted and held either way its a 2 person job?too heavy to rest on your arm or should er to get down their too heavy to turn the unit on its side
Is there a better motor to replace the lineal motor with?….What’s a good motor that you don’t see a lot of “stuck” issues with?…Is there a way to maintenance a motor to keep it working well?
My Serta won't go up but the massager works fine with the remote. I have a battery operated remote. I really need for the head and foot part to work again. In the past if I left it alone and once in awhile when I tried it would happen to work a time or two. What do you think is going on with it? Thank you.
Hi. What do I if my adjustable lumbar support is stuck in the up position. My bed is now shaped like a V. The other features controlled by the remote on the bed work. I have tried unplugging and plugging the bed back in. I have checked the remote batteries and I have looked under the bed to try to see if everything is plugged in.
So my bed is a split bed and one half of it is stuck in the up position. How do I get it synched up with the remote?
You were 💯 on the bar. So what is the cause of it? And how do I fix this problem for the bed to work?
Hey Keith, I’ve got a family members bed stuck in the up position. It’s a Rotec series 2000 multi position bed. It’s also stuck in the up position. How can I get it to work? Please help. Thanks.
My adjustable bed just stopped working last week. I've only had it since Feb. I tried replacing the batteries in the remote, unplugging and replugging in, as well the same but into a different outlet. I was using a surge protector as indicated with purchase. I am not sure what happened or what else to try. Can you help?
I was worried that we were going to be forced to do this when our remote stopped working but I looked up the manual online and found out our base can connect to our phones with bluetooth, it was a real lifesaver
I have an orthomatic bed - the wheels which move the frame as the motor works are broken. Motor works, bed wont move. Where can I find replacements rollers
When I raise my adjustable bed it slowly lowers intself down to the lowest height. What does this indicate?
I had to replace the motor for my dads bed for this exact reason, but it got stuck again as I put it in the up position to test it. Any advice what I should do?
I have an opera bed that is stuck in the up position at the foot end of my bedroom can I get it to go down again?Thankyou
Thanks bro earned that like fr
Hello , I can't find where to put a black wire that came off ?
Will be reaching out on monday. Just got a used base today and the control box is trash. Just beeps and stopped working after 2 mins of operating.
Are we gonna fix the bed or just leave it apart?
The pillow-tilt adjustment is stuck in the up position on a two day old L&P Prodigy 2.0...can I test whether it is motor or box by switching with one of the other motor plugs or does pillow-tilt motor have a different voltage?
Barry Druhan you need to call L&P and have one of our techs come out and repair. While covered under warranty, I’d advise you to NOT switch plugs and test. Yes, voltage may be different so let a tech repair it.
my serta foundation foot motor does not work it only making a clicking noise i'am thinking the motor is gone just wondering if can help?...thank you
Greg Benson ours did that too.
How do you get it back on? We can't ger it to line up
This is good information. But my 79 year old mother and I can't physically do this
I just lost the wireless remote. There is no reset button?
The head part of my bed adjusts up and down just fine but the foot part won't go up all the way anymore. It does go up some.. Just not all the way. Any suggestions /ideas?
PRAIRIE DOGS and THEIR KIN
Hi, It’s either the foot motor is defective or the lower hinges on your frame are broken.
The Adjustable Bed Doctor thank you for responding so quickly. if it's the lower hinges, how can I tell if they're broken?
How do you turn off the massager on my adjustable Denver mattress ? Help
I followed these instructions and got the foot of the bed down, but the actuator arm still won’t retract. How do I fix that?
Gerald Lanning the only thing you can do is replace the actuator.
What should I do if my bed slowly lays down flat when I’m using it in the up position?
Hi Rick, the problem is the limit switch inside motor is defective. The motor will need replaced. Call us for further help with a new motor @ 615-336-2875.
The Adjustable Bed Doctor thank you for the info. It’s only 3 years old and doesn’t get used all that much.
I have a double serta 2 motion bed and one side is not working in tandem? Is there a reset button? Please help John
Hi John, if your particular bed model has a reset button, it would be located either on the main control box or the D/C power supply.
My problem is that the feet part won't go up or down only the head part what do I do
Victor Moran , It sounds like the foot motor has failed and will need replaced. A simple test by switching the motor plugs around on the control box will confirm if the motor or control box is bad. Call us @ 615-336-2875 if you need more personalized service and help.
The Adjustable Bed Doctor we have an ergomotion bed. My husband's foot part will go up but won't go down. Head works fine. I've released the cotter pin so he can at least lay flat. What's the cheapest and easiest fix? Thx
what does the button marked st mean
Does Reverie have any customer support? I have been calling and leaving my name & phone number for three days. So far nothing from Reverie. Customer support must be lost.
Scott Puryear I’m currently having the same issue with Reverie horrible customer service last night my 6 month old base stopped working it won’t pair to the remote I even tried my friend’s exact remote with no luck . Now is seems like Reverie ha outsourced their customer service, they would take your information but good luck getting a call back.
They are the worst, never again.
Thanks Keith.. my bed squeaks when I put it up and down. I’m 73 and live alone so I won’t be able to flip it over like you did on this video. But before I spend money to get a repairman out here what do you suspect the problems is. Something a little WD40 can fix.
I do not believe you'll need a repairman for that. But you'll need to isolate the squeak and use ONLY a silicone lube. WD40 is water based and won't work too well. Good Lick!
Mine stops halfway but you can hear the motor go on for a while after it stops
More than likely you have a damaged gear. Contact our office, we may have a replacement motor available.
My adjustable bed remote control just died in the UP position. Solution, pull out the power supply, wait 20 seconds and replug it. The bed automatically goes back to the flat position. Hope yours do to :)
mybluebelly doesn't work for me I lost the remote
Before you watch this video, try the child lock first...