GE Washer GTW465ASN1WW will not spin.Easy way to get it working!
HTML-код
- Опубликовано: 6 сен 2024
- GE Washer GTW465ASN1WW will not spin.Easy way to get it working!
It could be fun repairing a GE washer?
AT LAST THE ANSWER !!!
Check out other videos
/ @downtoearthproblems
Lol that’s great. Fixed it with a new washer.
Yeah these new ones are junk, you fix one think and another problem presents itself. I don’t see a way to fix the new transmissions, they have to be replaced. On the older models I was able to refill with oil and reseal it with gasket maker just like you would an older car transmission. The worst problem you can have on a new one is with the motherboard. Only the manufacturer will have the software to program those. Everything these days is heading towards manufacturer only fixes.
The GE washer is the worst one I ever owned. Next time I am getting a Speed Queen. Thanks for the info.
Glad to help
You made the right choice getting the speed queen. 👍🏻
I think so too!
If you look up the control boards on the Speed Queen washers, they can cost $400 or more, and that's wholesale. In addition, manufacturers are only required to supply parts for 7 years by law. So, after 7 yrs, I've seen many things become unavailable. So, 7 yrs is the realistic life expectancy on any appliance, unless you're very lucky.
Before I bought the new speed queen I saw an old Whirlpool the gentleman we're selling it used, and it looked very good but it was 35 years old I so I asked my wife if she wants a 35 year old washing machine or a new speed queen of course she wanted the new one so I hope this machine holds up as good as my old GE but at least this new speed queen is much heavier then the new GE washing machine. Speed queen has has a transmission you can take it apart. I don't know about the electronics. So if this isn't gonna work very well I'm just gonna buy an old Whirlpool 35 years old I can fix that. So far the new speed queen is working excellent.
@downtoearthproblems ...I don't blame you for buying the Speed Queen. Good luck. It is no doubt constructed better. I'm just frustrated when I can't get a new control board for an otherwise fixable appliance, or it's prohibitively expensive.
I have a gas furnace that's 68 yrs old, and some people say I'm probably paying through the nose for gas, but it has no electronics to fail and is more reliable in general.
I'm not replacing it until it can't be repaired. My neighbor replaced his, and 10 yrs later, he had to replace it again because the main control board failed and was discontinued. I doubt that he ever recovered his investment in a new furnace. This is the junk society we live in today.
I have a GE washer too just like yours. That's the issue on mine too after cycle is finished cloths still wet. Everything on the washer is ok but notice oil on the belt. So that's the issue right belt slips. Bad design by GE
Yes it is a Bad design by GE.
Check Out Video #1 ruclips.net/video/No5MN97-9Ac/видео.html
Check Out Video #2 ruclips.net/video/ZY26s9TjQTo/видео.html
Same problem. Pure bad Machine. Tried Everything. Troubleshooting. Now I know.
Went out and bought a Front load.
I also tried everything.
I spent to much time on that GE
I hope your front load works well.
None of this surprises me in the least. I saw a video of a Maytag Commercial washing machine with the transmission disassembled. The outer shell was sheet metal and the internal parts were plastic and nylon. I was a bit surprised as they cost significantly more than the residential grade appliances. You sometimes get what you pay for.
That new GE washer was hopeless.
So far the new Speed Queen washer is working excellent.
@@downtoearthproblems I don’t doubt that for a minute. It looked like it was made to be disposable. I’m very apprehensive about the new appliances because the quality just isn’t there. Speed Queen is a very well built machine. You ought to get years of use and abuse out of it.
That's definitely the easy way get it working is replace it with a better one. I'm having the same dilemma as I made the mistake of trusting the G.E. name which in years past I had very good luck with. Todays appliances are obviously assembled from cheap Chinese materials.
I would have preferred to repair this GE washing machine but unfortunately the transmission was poorly made, that's why the oil was leaking after a year and a half. The motor is much too small because there was beautiful huge stainless steel tub on, it was very impressive, but with such a small motor it wasn't being turned properly so because of these two reasons I just couldn't repair it so unfortunately. I was forced to junk it and I do feel disappointed by the quality of General Electric and I think the engineers from General Electric are fine but I think it's the advertising and the financial problems because the people buy these machines don't really understand they're not made together very well.
@@downtoearthproblems sadly the cheap appliances have become like cheap radios & TVs a few years back. They've become disposable throwaways. At todays service, labor & parts prices it doesn't take much to add up to the original price paid for a machine that was less than $500.00 .My GE is also deafening loud in the spin cycle.
It would be tolerable in a separate laundry room, basement or porch, however mine is right off the kitchen.
Have the same wager. No problems with the motors. Where is your belt between pulleys? Belt is probably worn. Also check the water pump bottom left. Might be clogged
You're right the belt is bad but the real problem is the transmission is leaking oil.
But even with a good belt. The motors too small to spin heavy clothing in the tub.
Thank you for making a comment.
Speed queen washer
I am happy with my Speed queen washer.
@@downtoearthproblems , cleaned the pulleys really well, put new belt on, working great, see how long it last
Best on the market and simple as falling down
I like our Speed queen washer
I own this exact same GE washer. It’s very temperamental and only works when it wants to, and when it does actually work, it sounds like it’s going to take off and fly away when it’s in spin cycle.
I think I’ve watched almost every YT video ever made about them thinking that I’m going to have this “omg I finally got it diagnosed and fixed it” moment.
Half my lights on my washer not working why
Go into Diagnostics mode so you unplug the machine for about a
minute wait a minute plug it back in then get your LEDs should work.
Check Out Video #1 ruclips.net/video/No5MN97-9Ac/видео.html
wow 1.1k views in 7 days
Thank You
Traducir
gracias lo haré en el futuro
AWARNING, any time you have oil dripping you may end up with a fire!
No Problem it is in the junk pile.
Thank You for watching
Check Out Video #3 ruclips.net/video/BHWtbLZuVr0/видео.html