✨GE WASHER WON’T SPIN - EASY FAST FIX✨
HTML-код
- Опубликовано: 14 сен 2018
- ✨GE WASHER WON’T SPIN - EASY FAST FIX✨
QUICK WAY TO CLEAR THE WATER LEVEL TUBE TO GET IT SPINNING AGAIN.
NO PARTS NEEDED👍
Click Here For Over 300 Easy DIY Appliance Repair Videos At Our Brand New Channel: / bestdiyappliancerepair...
CLICK HERE TO DONATE😃 www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
IF MY ADVICE HAS HELPED YOU...
PLEASE CLICK HERE TO DONATE
www.paypal.com/cgi-bin/webscr...
PLEASE HELP TO KEEP THIS SERVICE GOING
THANKS SO MUCH😀
Check Out Scott’s over 600 Appliance Repair Videos:
/ scottthefixitguy
Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com"
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/scottthefixitguy
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu 
Хобби
Thank you, your a lifesaver.! Mine had a dirty tube and also needed a clutch but spinning better now.
Nice job😊😊😊
OMG THANK YOU - 60 YR OLD FEMALE - HAD BRAIN SURGERY 6 MONTHS AGO - MY BRAIN WENT INTO MELT DOWN. Washer would not fill or spin - started looking for new washer that I can't afford right now :( figured just maybe youtube can help - FIXED IN 5 MINUTES - THANK YOU THANK YOU THANK YOU!!!!!!!!!!!!!!
Thanks so much Jeanne😊
Thank you, thank you thank you!!! Was puzzled beyond reason after seeing my drive belt was fine and all looked fine under the hood. I found a ton of black crud in the tube. Fifteen minutes later, my clothes are spinning out. Awesome video.
Just wanting to say thank you. Did exactly what you said. Washer working well. I appreciate you.
Thanks! Worked like a charm and saved me a ton of time and money
This was a huge help. My mom urgently needed a washer and since it was going to sit outside, we weren't spending a lot. Lady sold us one cheap because it overflowed and she could only get it to work on medium load. When we got it home, now it wouldn't spin. Expecting it was the belt, I came across your video and it was the exact problem. The machine works on big loads now too. Thaaaaaaank yoooooou!!!
Thanks so much Dusty😊😊😊
My washer has been messed up for a few days... Thought it was the pump and found your video and tried it. Worked like a charm and I couldn't be more happier. Thank you sir for sharing this info!!
I love it❤️😊👍
i was so upset and thought i needed a new washer. your excellent and easy explanation had it fixed in a matter of minutes. thank you so much!
Very cool, thank you😎😎😎
This was exactly what I needed.
You've saved me a lot of money, and gave me some knowledge.
Thank you so much
That’s what I love to hear 😊👍
Great video. Have very similar GE model and exactly same symptoms. Removed front cover of washer and immediately saw the clogged tube. Cleaned it and resolved problem in less than 10 minutes. Thanks for the help. Wife us happy again.
Nice job Joseph😊
Oh yeah oh yeah🎉 I'm a solo Mama and fixed my machine thanks to you and your video ! Feeling like a super woman. 😆 Thank you!😊
I love it❤️👍😊
Thank you it work especially since I'm not mechanically inclined, thought I be spending major bucks
Thank you 👍
This video is 5yrs old and today it save me some $ from calling a repair company or buying a new washer.
Thank you
Awesome, thanks for the follow up😊
Thanks so much for your video! You saved me from buying a new washer!
Was a easy fix...Thanks Again!
This might have just saved my washer. I would have never thought of this! I pulled the hose off, and the little box the hose connects to was blocked by something the size of a small dot. I really appreciate you and thank you.
Nice job Mike😊👍
Awesome Video! Found quite a bit of gunk in the end of the tube, cleaned it out; works perfectly. My wife thanks you!
Thanks Frank,
You are most welcome
Just want to say thanks! With enough to worry about with Covid-19 sweeping the globe this was a quick fix to what I thought was a larger problem. The washer is now spinning after cleaning the hose as suggested. Again thanks and stay safe. You have helped resolve a issue in a critical time.
Good job Edward, thank you
This video was just what I needed. I cleaned that tube and my washer was spinning like a champ.
Thanks and thank them Awesome
Can't believe how easy this was. Thanks so much.
Thanks so much 😊👍
I used a piece of weed whacker string to unclog the tube. Thanks for this video, saved me $150 repair bill.
Great idea👍
Fixed! Thanks for your knowledge!
You’re welcome👍
Thanks for saving me money! I appreciate it!
You’re welcome😊
Yea!!! I fixed it and didn't break a nail!! Thank you so much!
That it awesome, thank you😊
You are the absolute man! Thank you so much. I wish I had saw this video first. But found it. And my machine is working. THANK YOU SIR!
Awesome, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: ruclips.net/channel/UCGpInAejvpfVVE4FHB_L-Dgjoin
Worked like a charm! My washer would not spin and I did exactly as he said and my washer is back to spinning! Good as new! Thanks!!
Nice job Stephanie❤️😊
Thank you, I followed along and after blowing out the dirty tube it works again!
Excellent! Tip Jar:venmo.com/code?user_id=2758682643267585005
Worked great! Ty!
Thx a lot it really work
While watching this video i fixed my washer in 2 mins thanks for the informative video. This video Helped me save $400-$600 Dollars ty
That’s what I like to hear😊
Great video.
Thank you! Fixed mine in 10 minutes.
Awesome,
Thank you👍
Thank you!!! you saved me a ton of time and $$$
Excellent,
I’m happy I was able to help😊
Thanks for the video! 👍
Thx so much. I will try this.
Thank you. 2 hours after giving up I tried one last search and found this.
Excellent, thank you 😊
Fixed the issue. Saved me some $. Thank you!
Thanks so much👍
Following this video, I was able to fix my washer at no cost. Thanks
Thanks Dave👍
@@QuickAndEasy5MinuteAppliance I took a short piece of wire and bent over about an 1/16 inch of the end to grab the lint and pull it out.
Brother, I just want to thank you for this video. Worked like a charm and made me look pretty slick in front of the ol’ lady. Cheers!
Thanks Derek😊
Same here, feels good...
This did the trick! Thank you.
Very good👍
I will definitely try this tomorrow we checked the belt it wasn’t rotten or loose. The machine washes, drains, but doesn’t spin. The magnet on the machine works fine.
Might be the lid switch 👍
Thank you! My pressure tube was clear...but I found PACKING MATERIAL that movers from an earlier transfer had placed inside of the washer...to protect it was damage while being moved. I have taken that material out. The washer is happily spinning. :)
Nicely done😊
Thanks for the tip bud. Worked great saved me from buying a new one
Awesome,
Thanks Kyle👍
Thank you! That worked!!!
Excellent,
Thank you 😊
Thanks for sharing! 🙏🏻🙏🏻👍🏻👍🏻
You’re very welcome 👍
Saved my washer! You’re a hero! There was barely a tiny clear layer of film stopping it from sensing properly. Nothing like the giant load of black gunk from this video but it was enough apparently!
Awesome, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: ruclips.net/channel/UCbQy5UxlvaPPsDHvfvW76JQjoin
Fixed mine right up. Thanks man!
That’s what I like to hear👍
Very cool! Thanks so much!!
You’re welcome 👍
Thank you, thank you! This fixed my washing machine. You’re awesome!
Thanks so much Danielle😊❤️
That was the exact issue. Thanks!
You’re welcome,
Thank you👍
You are a BLESSING to me!!!
You just saved me a $75 service call!
Amazing! Thank you so much!!
I’m so happy it worked for you😊
Thank you!!!
You’re welcome👍
That was my problem you thank you very much. My tube must have been clogged. But now the washer makes a lot of noise
Glad it helped😊
Good video ,5 starz
👍Up definitely gained a new subscriber. The piece the hose connected to had stuff in it. Does make a noise when spinning not sure if thats normal but will keep researching. Thanks again
Thanks Andre👍
Should it spin mid cycle as well? I have noticed that mine is not, however I thought it used to? It only spins at end of the complete wash cycle
Thank you for posting this video. I followed your instructions and my washer is spinning again.
Thanks Jeanne👍😊
Vielen Dank, das war super!!!
You’re very welcome😊👍
Thanks! Nice two tone submariner !
Thanks so much Parker,
They are great watches😊
Thank you
You’re welcome😊
Were there other symptoms? Mine had some smoke, so I'm thinking more along the lines of the belt.
I have this washer, and in my case, there was a large amount of Fluff from god knows where and it was wrapped around the thingie that makes the belt spin, so as it spun it wrapped tightly around it and was starting to burn as the pully turned. So it would spin but it would stop and smell like it was burning.
Yep,
That’s pretty common.
Usually caused by washing a comforter 👍
@@QuickAndEasy5MinuteAppliance HA! That makes sense. I was so many on a daily oh.. I'm afraid to look inside the other washing machines.
Thanks
Welcome😊🎉
Well, it just happened to me. Once I managed to get the front panel off, I used a can of compressed air... I got the clicking sound. Then I used the plastic tube on the compressed air can to clean the port on the side of the tub.
Quick rinse cycle seems like it's going well. Hope it finishes, then back to laundry duty!
Thanks!
Junk , you just got lucky . 9 times out if 10 it's the motor. GE appliances are the worst built , second Samsung , third LG.
Thanks!
Welcome!😊😊😊
Thank you so much!! This fixed my washer! Thank you, thank you!
You’re very welcome😊
Machine leaking from the shaft
It worked!
Excellent 👍
Thank you!
YOU, SIR SAVED THE DAY!!!!!!!!!!!!!!!!!!!!! THANK YOU!!!!!! NUTTY NBOR SAID BUY A NEW ONE!!!! WE SHOWED HIM!!!!!!!!!
Awesome Job😊😊
thank you! you are the best!!!!!
Thanks so much Gina👍
Great video. Did all the step but mine is still NOT spinning. What could it be?? Getting the clicks the washer wants to jump into spin cycle but wont.
Can you send that same question to my email at: scottthefixitguy@yahoo.com
If the tube gets dirty and plugged, my washer floods. I forgot how to open the front panel. Thank you. I just washed a 100% cotton blanket. I need to check.
I hope it helps👍
Boom fixed! Thanks.
Awesome😊
Woo hoo! I just fixed my washer.
Thanks!
Great job!😊😊😊
Help! 1st mine didnt agitste properly. Now it won't agitste at all and it wint won't spin. I hear the click on the magnet. I checked the tube; it did not look clogged. It does empty the water out.
Hello dear friend. I have a GE washing machine. ..model WISR106DGDWW the motor doesn't work. AND the LED on the pcb blinks 4 times. .in catalog MODE SHIFT CIRCUIT FAILED. ...what is that mean. Please explain. .thanks
Careful working on live equipment
Ok I have the same exact lg model as in this video I replaced the lid switch because mine was damaged I checked the tube and the belt but I still can't get the spin cycle to work the agitator doesn't work either any suggestions on what I should try next
Any luck with yours? I’m having the same problem
Scott,
I have check the tube the pressure switch works and I have reset the motor twice. The washer agitates and drains the water. However, it will not spin. I have tried to start the spinning by hand, but stop as if there was a brake on the motor.
Thanks,
Tim
Thanks Tim, can you send me that same question to: scottthefixitguy@yahoo.com
Did you ever get this resolved? I am experiencing the same issues that you mentioned. I replaced the pressure switch and now it’s intermittent
could the pressure switch cause it to not agitate too? It used to not fill but now it fills but most of the time doesn't agitate or spin. Sometimes it can do everything sometimes it only fills. Thought it might be the timer.
check the lid switch if it does neither
Does this work for all GE models I would think the parts placements would not be in spot
It does work on most👍
I did as instructed though the tube seems to be fine, whena signal it sent to spin it starts to move the clicks kind of loud and wont spin. belt seems fine. very small loads it works fine but larger loads no go. Any help would be great thanks
Sounds like a bad motor going out, runs but it’s weak
My tube looks almost new. The pressure switch clicks when I suck on it. The belt seems perfect. When I close the lid and set it to spin it sounds like the pressure switch is continuing to click about every 2 seconds. When I open the lid it stops clicking. I even tried the open and close 6 times in 12 seconds to reset it (a few times). I really appreciate you posting this video. Do you have any idea why mine still will not spin? Thank you.
Thanks Richard,
I wonder if that’s the motor trying to spin the spin basket and getting overloaded, clicking off and then clicking back on.
Do you think there’s something caught between the spin basket and the tub?
@@QuickAndEasy5MinuteAppliance Interesting question. It's not a loud click. I just thought it was the pressure switch. I have ordered one and I'm going to replace it. If something is caught in the spin basket how would I find that? Thanks again for your video and your help.
@@QuickAndEasy5MinuteAppliance I put on a new switch and it didn't change anything.
My GE washer agitates but doesn't spin. I had replaced motor capacitor which didn't work so I am thinking clutch could be the issue. I don't understand though how can it agitate but not spin if the clutch isn't working.
Thanks Amar,
Can you send that same question to my email at scottthefixitguy@yahoo.com
My clothes keep going to one side when washing so it's out of balance to spin . Then I stop it and it has to start washing all over.
Hi, if I can hear motor rotation in a spin mode after couple minutes from starting, but it doesn't spin, can it be the same reason as in your video or is it probably belt damaged? Thanks.
I think it’s a broken or worn out belt👍
Thanks for your support😀👍
Glad to help👍
Mine spins very slow, and most of the time I have to do 2 spin cycles due to excess water in washer after 1st spin cycle is complete. Can this be an easy fix as well or do I need a new washer? TYIA
Your drain pump needs to be cleaned.
I trie checking that tube, it was clear and when I blew on it, I could gear the magnet thingy click!! Belt it on and I can spin it with my fingers.
Hi Michael,
Can you send me this same question and your model number to:
Scottthefixitguy@yahoo.com
Hi. This looks like the exact washing machine that I have, and today it started giving me problems. I purchased it used about a year ago. It will not spin nor drain. It started make a very large scraping noise, and then it would no longer drain out tge water nor spin. I took everything out of the washer soak and wet. You can still hear a lot of water inside of the drum of the machine. When I put it on drain/spin it sounds as if its washing, but it's not draing out the water nor is it spinning. Please help me. I can't afford to buy another machine right now. How do I get the water out of the machine, (I can't see the water, I just hear it)? Do I have the same problem as your video? It's not draining nor spinning, and the drum sounds like it's still full of water. Please help. Thank you.
Can you send a video of that to: scottthefixitguy@yahoo.com
Oh cleaned hose and it’s spinning now but won’t drain. Any idea, I blew on hose and heard clicking.
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00:
ruclips.net/channel/UCGpInAejvpfVVE4FHB_L-Dgjoin
Mine is beeping while filling up before wash like the lid isn’t closed but it is. I did the diagnostics codes but nothing. I’m not sure what is wrong. I looked at the pipe nothing is in it.
Hi Jovonda,
I think you just need to replace the lid switch.
You can put your model number into a Google search to find a new lid switch.
This didn't work for me, could you say what else could be the problem
I wonder if the belt came off?
What if I cleaned the pressure sensing tube cleaned the drain pump and my spin cycle still not working properly
My agitator works really well the tub just doesn't spin , if I help it soon it starts for a bit then stops
mine doesn't open this way solid front body style about only 5/6years old.
Hi Cathy,
Can you send your model number to: scottthefixitguy@yahoo.com
Does it have to be unplugged first
It’s best to unplug it👍
What do I do if that didn’t work??
Can you send that same question to: scottthefixitguy@yahoo.com
MY problem is empty the machine spin but not with a load of wet cloth, i tried your advice but still not spinning.
Might be time for a new belt.
Could be slipping under load.
I've watched so many videos, can't remember if this could be relevant. You might have a bad clutch. Try putting a magnet on the switch and helping the basket start turning by hand.
How do I know I fix the lid. When it fills up it beep as if the lid is not closed when it is. Which is causing it to not spin
It sounds like it needs a new lid lock.
@@QuickAndEasy5MinuteAppliance is that an easy fix? Are you able to inform me how I could fix it?
Mine spins but won’t agitate the plastic piece isn’t stripped under agitator. Why won’t it agitate please help
Can you try different parts of the dial for agitate?
thanks for posting but checked and cleaned the line, no dice. this washer just doesn't want to spin. any other suggestions?
I bet it needs a new lid switch 👍
@@QuickAndEasy5MinuteAppliance I can try it, but on my model, the lid lock engages when the unit starts draining and appears to be working fine, so my next question would be, why wouldn't it spin if the drain function works and the lid locks?
I am having the same problem.
@@uni-owllewis6716 ended up being the belt at the bottom was falling off. tried putting the same belt back on a few times and it kept coming off. ordered a new one and it was much harder to get on, which meant the old belt was just worn. a week or so in with the new belt and no problems!