I have a MP5, MP5K, and a MPX. I still love my Stribog. Just wished they started with a curved mag + metal feed lips and AR parts adaptable triggers and grips
@@cercaz its almost a given these days, being able to take AR triggers is a huge plus, but not using AR pistol grips is a bit of a stunner. Seems like a no brainer to tap into that established aftermarket.
I couldn't say anything bad about the stribog..personal opinion and my experience I've out run and outperformed scorpions B&T and Rugers all day long the Bog is the God or war not thunder
@@HYDRAdude It works but it's so expensive. $300+tax+fees+tip+mags. On top of the $750-$1200 Stribog depending on model. Might as well get a CZ Scorpion and save yourself money, time and headaches.
@@HYDRAdude Buy once, cry once. I have done my best to avoid ending up with tons of spare parts and wasted money. It would be nice if Global Ordinance sold stand alone Stribog uppers. So I can pick the model, I want and sold the registered lower separately.
Was Gonna Get The Angstadt New 9mm Pdw But Every Honest Review I Seen It Was Terrible … That Stribog Mp5 Looking One Got My Attention Tho 👀 Hope They Work Out The Evo Skorpion Mags Situation Soon.
My $ is still on the CZ Scorpion (Not the new 3+, the pre-2022 gen). Better Accuracy at 200+ yards, Czech military battle proven, runs steel-cased ammo like a top, ROF is top 5 fastest SMGs
@Michael Hossle-Assle Like I said. Most 10mm is downloaded to 40 cal specs. The two or three manufacturers who load it to the correct spec doesn't justify getting a gun in that caliber for it. Only in the situation of you living in bear country would I understand a 10mm handgun. Then you'd be limited to one ammo company like Underwood.
@@manganvbg90 they’ve all been the same clear polymer tho. Biggest complaint is no longer feed reliability, but cracked feed lips. The new material should hopefully take care of that.
@@TheGloriousLeader could have solved alot of headache by just buying a scorpion mag lower. Are there any other mags thats better out there for the price?
I cannot believe how unreliable boats have become. It seems they are capsizing and sinking all the time. Maybe it's that global climate change that is making the waters rougher and navigation more treacherous.
No reason other than I already have a mountain of .45 ammo, and no 10mm. Also, being inherently subsonic in most factory loadings means .45 suppresses much better without specialty ammo.
Mad respect for the weapons producers to mention brace rules see a lot of comments of people being uninformed and upset they bought a weapon that is effected by it without being informed 👍
Picked up the 10mm A3. My second Stribog (9mm A3). 600 rounds super accurate and not a single FTF. My 105lb daughter in law claimed it and would not put it down. Ringing steel at 100yds. Only complaint are the plastic mags. Fully loaded one I dropped and it cracked. GO promptly replaced it, but the mags need some reinforced steel at the top.
They'll need to do something... Most people aren't willing to drop 700 bucks (tax and transfer) on a 22 range toy. I heard they were coming... I'm pretty disappointed about the price. I'll just look somewhere else at this point.
If they make an *OEM* lower that takes Scorpion Evo mags I'd be all over it! Any update on if they worked the kinks out of the delayed blowback action?
Saw a video two months old of a new production Stribog A3. No, their mags are still ass and still cause problems. Get the Glock lower or hope these new mags fix the problem.
Don’t listen to the guy above. The new curved mags are great. Use 124gr ammo that’s decent. A lot of shit 9mm ammo that can cause the blowback not to cycle fast enough. Mine fires all hollow points I’ve tried, only issues are from remanufactured ammo. Sorry the guy above me got a dud
Years ago when my brother worked at Rifle Dynamics the Magazine being made of U.S. Parts was barely passable for 922(r) compliance if and when you had a stickler of an agent because, by technicality, when the Magazine is removed from the firearm you are now at a loss of the mandated Compliance parts - so this is when the market for U.S. manufactured Pistons, Barrels, Furniture, and Fire Control Groups saw a rise in demand. I highly suggest partnering with Domestic manufacturing to create a "cleaner" approach to achieving the necessary parts for compliance, especially in areas not easily removable/replaceable.
They went with a Glock lower "option" instead of switching everything to CZ Scorpion mags. They take one step forward and two steps back. All these different models, sizes, and calibers might be their downfall when they should have refined, reduced variables and improved what was already there. All these extra costs might bite them in the ass when customers stick to one thing.
Pcc’s and .300 blk out in rifles make much more sense to me integrally suppressed. Imo 16” rifles barrel is unnecessary for those calibers. Hopefully in some timeline we get suppressors off the nfa.
That hint on .45 and 10mm models down the road is cool, but what about the 7.62x25 Tokarev model in the European website? That's what I wanna see come over.
They should just decide on Glock or CZ Scorpion mags and stick to them exclusively. Then over time improve the core parts. They're just throwing everything to the wall and seeing what sticks.
@@almostontimehero5415 Agreed... I wonder if they would have to pay any royalties to CZ if they were to do Scorpion mags. Regardless, yes, Scorpion and Glock mags are basically the standard these days and VERY proven.
I agree on the 22 TCM. However, if you've ever fired a 22 TCM, the slide-spring is really, *really* light. It's because the 22 TCM doesn't develop a lot of bolt-thrust, I guess, or "impulse", or whatever is necessary to cycle the bolt. I'd guess that this makes cycling kind of picky since it doesn't have much to work with. But yes, a semi-auto carbine in 22 TCM would be really welcome.
Thank you for clarifying how to say STRIbog. Not streeeeebog. I hear they are coming out with gen 4 CZ style magainzes. Maybe 4th time is the charm because their mags suck donkey nutz
Man I've been waiting for a .45 Stribog since they first came to market. Hoping they do a double stack, double feed mag instead of just going with a shitty Glock mag. Also the A3 system.
Would be nice if they stood behind their product and didn't use us early adopters as beta testers. Only to be told "buy gen 3 mags cus we aren't swapping all your broken gen 1 mags"
Stribog 22lr with 300mm threaded barrel was one of my choices when was looking for nice and compact 22lr trainer. But with AR stock adapter and shortened version was costing bit much. So i went to tippman m4-22 elite with 12.5 barrel. Least for now i havent been disapointed. Running nicely with supressor and norma 22lr tac normal and subsonics. Only complain about tippman is how expensive their magazines are. I could get 2-3 stribog mags with same price. Future will tell will i have Stribog in 9mm. It is definelty not out of question if happen to need PCC
@@Jscot1001 In europe rifle/shotgun barrel can go short as 11.8 inch and supressors only recuire existing license to firearm. But tippman mags are 85e while stibog mags 29e Edit: Full price tax included.
@@Jscot1001 Yeah what i have learned whole pistol brace shitshow it doesnt look too good. For us it doesnt matter do it have buffer tube or not because if getting short as possible barrel then gun overall length needs to be least 600mm(23.6inch) So folding stock will make it too short to be legally long gun. We used to have category as any other weapon before miniman length was shortened but now new license for gun in that category is pretty much same as full auto. Unobtainium for civilian shooters. Micro version looked good and i can guess how nice it is to stuff in backbag. But if cant make it sbr then i cant see much of point because modifications to put longer barrel will most likely cost more. From our view whole pistol brace as circumvent to get shorter than 16 inch rifles looked stupid even on a paper. And i was kind of sure that it will be accepted as norm to have shorter rifles but last years have not been too gentle for gunowners in states. For us that War in Ukraine kind of halted hate against gun owners and we arent least by now seen as next to devil. This year i think we will have nice spike in dropped applications for sport guns(AR/AK) because 1 year active shooting as hobby is recuired to get semi-auto rifle with unrestricted mags. (two years for pistol) And When we look at calender we can see nice amount of people trying to get club memberships and shooting courses right after invasion started at last year. So overally it is also shitshow in here but if i had to choose i think it is more positive than negative.
Did they really just say they designed a U.S. made String only magainze for 22r compliance? Instead of using US made Scorpion mags and having Scorpion mag compatibility? Are they really that stupid?
glock mags are very practical if your sidearm is a glock.....but the 33rd mag makes PCCs ugly....maybe for videos or photos just use th 20+ rounder glock mag
that arm brace being banned is hard to wrap my heads around, I have friends that are missing limbs or others that are elderly would also be considered at risk that this will effect, less we start making prosthetics into weapons they will stay vulnerable not sure how the FED considers these issues, I think this is how regular folks see it was this done in their best interest's?
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Outstanding interview. James cut to the chase and asked what most of us wanted to know. Looking forward to seeing their product on store shelves.
That guy knew his stuff. Very straightforward. Doing a great job for that company.
James did awesome interviewing, straightforward, clear, concise. Super excited for a 45 ACP Stribog, it better be the A3 action.
Im so proud that product from my homeland is so popular overseas. It's kind of like a badge of honor.
I have a MP5, MP5K, and a MPX. I still love my Stribog. Just wished they started with a curved mag + metal feed lips and AR parts adaptable triggers and grips
@@cercaz its almost a given these days, being able to take AR triggers is a huge plus, but not using AR pistol grips is a bit of a stunner. Seems like a no brainer to tap into that established aftermarket.
Make good guns and we will buy
Only took them like 3 generations to make one that doesn't split open lol
I couldn't say anything bad about the stribog..personal opinion and my experience I've out run and outperformed scorpions B&T and Rugers all day long the Bog is the God or war not thunder
The 45acp and 10mm Stribogs are impressively soft-shooting.
I'd love a 10mm Stribog to fulfill my need for the SMG from Fallout.
Eww
Ywnbaw
And here I was thinking about a 10mm Sten....
10mm Stribog for the win.
@@squirrelswithm4s108 of course its obsessed with video games
Wish they would do 2 things: make a 5.7 version, and, make a factory lower that takes Scorpion mags.
Scorp lowers all the way. Magpul scorp 35r magazines are a joy to use.
I have heard zero complains about the Lingle Industries lower that takes scorpion mags.
@@HYDRAdude true, but wouldn't it be nice if you didn't need to spend over 300 dollars for one and the gun just took them out of the box?
@@HYDRAdude It works but it's so expensive. $300+tax+fees+tip+mags. On top of the $750-$1200 Stribog depending on model. Might as well get a CZ Scorpion and save yourself money, time and headaches.
@@HYDRAdude Buy once, cry once. I have done my best to avoid ending up with tons of spare parts and wasted money. It would be nice if Global Ordinance sold stand alone Stribog uppers. So I can pick the model, I want and sold the registered lower separately.
Better than an Angstadt
of course lol
Was Gonna Get The Angstadt New 9mm Pdw But Every Honest Review I Seen It Was Terrible … That Stribog Mp5 Looking One Got My Attention Tho 👀 Hope They Work Out The Evo Skorpion Mags Situation Soon.
@@keepmovingforward5576 go all the way and grab a B&T. 100% worth the money.
My $ is still on the CZ Scorpion (Not the new 3+, the pre-2022 gen). Better Accuracy at 200+ yards, Czech military battle proven, runs steel-cased ammo like a top, ROF is top 5 fastest SMGs
Literally everything is better than Crapstadt.
That carbine in 10mm will be really nice.
You mean 40 cal? Cause most 10mm on the market is downloaded to 40 cal specs.
@@thystaff742 not Underwood Ammo ^_^
@Michael Hossle-Assle Like I said. Most 10mm is downloaded to 40 cal specs. The two or three manufacturers who load it to the correct spec doesn't justify getting a gun in that caliber for it. Only in the situation of you living in bear country would I understand a 10mm handgun. Then you'd be limited to one ammo company like Underwood.
As a Stribog owner I’m stoked. Better magazines is something I’ve been waiting for.
Havent they lsunchep new and improved mags three times now?
@@manganvbg90 they’ve all been the same clear polymer tho. Biggest complaint is no longer feed reliability, but cracked feed lips. The new material should hopefully take care of that.
@@TheGloriousLeader could have solved alot of headache by just buying a scorpion mag lower. Are there any other mags thats better out there for the price?
@@manganvbg90 I’m not gonna spend another $300 for an A3 or Lingle lower on a $600 gun to buy more magazines.
Would you recommend a Stribog without a brace?
I loved my Stribog but after this ATF ruling, I had to make the unfortunate decision to go on a boating trip, and our damn boat sank.
I feel ya, man. The same thing happened to me and my first AK rifle 6 years ago after Trump signed his ban. The sea is a tricky mistress
gotta love Massachusetts gun loving TDS dems.
I cannot believe how unreliable boats have become. It seems they are capsizing and sinking all the time. Maybe it's that global climate change that is making the waters rougher and navigation more treacherous.
@@michael2636 Trump signed a ban 6 years ago? Immediately after taking office? What did he ban?
@Skm Keith we hate them too, that should be scary.
Ever since I came across the stribog I've been wanting a 10mm one, oh happy day that I've came across this video.
A .45 Stribog might be just what the doctor ordered if it's worth a damn
10mm everything.
@@opensourceai8357 .45 is a Beautiful cartridge to suppress. 10mm not so much
No reason other than I already have a mountain of .45 ammo, and no 10mm. Also, being inherently subsonic in most factory loadings means .45 suppresses much better without specialty ammo.
@TotenfurWotan 10 mill is pretty easy to suppress. The average bullet weight is already 180. Not hard to find 200+ especially for reloading.
A 45 acp would be awesome!!!!🔥🔥🔥
Just something to put out there If tuned to the particular 16" barrel 9mm carbine with using the 147gr bullet a 16" barrel can be surprisingly quiet.
I want to turn my Stribog into a carbine so badly
@@FUBBA Im gonna get one and pin and weld a 9mm YHM can
problem is, much of the cheap 147gr 9mm is supersonic in 16" barrel. You want 6" - 8" if you like the cheap stuff
Mad respect for the weapons producers to mention brace rules see a lot of comments of people being uninformed and upset they bought a weapon that is effected by it without being informed 👍
That MP5 looking one got me intrigued
Great vid. Sam is a great dude, very chill. Love the idea of a natively subsonic 45 round and a hotter 10mm. Glad to see not everyone is doing a 5.7.
I absolutely love how my SP9A1 shoots.
Picked up the 10mm A3. My second Stribog (9mm A3). 600 rounds super accurate and not a single FTF. My 105lb daughter in law claimed it and would not put it down. Ringing steel at 100yds. Only complaint are the plastic mags. Fully loaded one I dropped and it cracked. GO promptly replaced it, but the mags need some reinforced steel at the top.
Hopefully those .22lr uppers will be sold separately since I already own a lower. Perfect timing as I'm in the market for a new .22lr long gun.
They'll need to do something... Most people aren't willing to drop 700 bucks (tax and transfer) on a 22 range toy.
I heard they were coming... I'm pretty disappointed about the price. I'll just look somewhere else at this point.
If they make an *OEM* lower that takes Scorpion Evo mags I'd be all over it! Any update on if they worked the kinks out of the delayed blowback action?
Saw a video two months old of a new production Stribog A3. No, their mags are still ass and still cause problems. Get the Glock lower or hope these new mags fix the problem.
Don’t listen to the guy above. The new curved mags are great. Use 124gr ammo that’s decent. A lot of shit 9mm ammo that can cause the blowback not to cycle fast enough. Mine fires all hollow points I’ve tried, only issues are from remanufactured ammo. Sorry the guy above me got a dud
@@bonsaw57 agreed on all points
@@bonsaw57 Mine Run Fine As Well, Newest Model Curved Mags.
HE PUT A MAGAZINE IN YOU'RE GONNA GET A STRIKE 🤣
Great video! Short and sweet and to the point.
Damn, no mention of making the 16" inch barrels available for purchase for the existing Stribog models. :(
The gun industry is roaring back to life, imo. Much more impressive showings than the last couple years.
Nice catch on keeping the MSRP and stats on the table. Keep up the good work James.
Years ago when my brother worked at Rifle Dynamics the Magazine being made of U.S. Parts was barely passable for 922(r) compliance if and when you had a stickler of an agent because, by technicality, when the Magazine is removed from the firearm you are now at a loss of the mandated Compliance parts -
so this is when the market for U.S. manufactured Pistons, Barrels, Furniture, and Fire Control Groups saw a rise in demand.
I highly suggest partnering with Domestic manufacturing to create a "cleaner" approach to achieving the necessary parts for compliance, especially in areas not easily removable/replaceable.
You get an SBR, you get an SBR, EVERYONE GETS AN SBR!!!
James is taking sales guys souls with his no nonsense questions. I bet they shot show their pants when he levitates into booth
Why not CZ scorpion mags?
They went with a Glock lower "option" instead of switching everything to CZ Scorpion mags. They take one step forward and two steps back. All these different models, sizes, and calibers might be their downfall when they should have refined, reduced variables and improved what was already there. All these extra costs might bite them in the ass when customers stick to one thing.
The PCC market is gonna get quite interesting over the coming months here.... gonna wait it out and see.
That F5 stock is not affordable lol. That thing retails for $400 on its own
10mm Stribog gives me a chub.
TMI
Can anyone identify the optic on the SP9A3 with the suppressor and light? Looks like some type of Holosun on a QD mount.
10mm in one of these configurations would be badass!
Do most Stribogs really come with the pic rail and QD mount? That wasn't the impression I had.
Will there be a kit to convert the SPA3 to a RSR9? Do they sell just the 16inch barrel replacement to the SPA3?
A 10mm roller delayed blowback that costs less than a cmmg banshee mk10 sounds awesome.
I had an A1, really enjoyed it until the magazines broke.
They released revised curved mags a while ago that fixed that.
@@TheeCambion yeah I had a few of the curved magazines. One of them cracked the first day I used it.
hopefully they release versions that work
What brace is that
Pcc’s and .300 blk out in rifles make much more sense to me integrally suppressed. Imo 16” rifles barrel is unnecessary for those calibers. Hopefully in some timeline we get suppressors off the nfa.
The only way we get a Stribog in .300aac is if the Slovakian military funds the development for one.
That hint on .45 and 10mm models down the road is cool, but what about the 7.62x25 Tokarev model in the European website? That's what I wanna see come over.
personally I like Stribog, and is a Brand that I am looking forward to adding to my future cache.
Wish it took scorpion mags!
Does anyone know when the end of quarter 2 ,when these will be available thankyou.
10mm/45 ACP ... Hope there will be a Glock 20/21 mag compatible version !!!
*^^^THIS!!!*
They should just decide on Glock or CZ Scorpion mags and stick to them exclusively. Then over time improve the core parts. They're just throwing everything to the wall and seeing what sticks.
@@almostontimehero5415 Agreed...
I wonder if they would have to pay any royalties to CZ if they were to do Scorpion mags.
Regardless, yes, Scorpion and Glock mags are basically the standard these days and VERY proven.
Those new reinforced nylon stribog magazines just straight up don’t exist. Not listed anywhere and cant find any info on them.
one of those in 9mm and full size 22TCM would be awesome
I agree on the 22 TCM. However, if you've ever fired a 22 TCM, the slide-spring is really, *really* light. It's because the 22 TCM doesn't develop a lot of bolt-thrust, I guess, or "impulse", or whatever is necessary to cycle the bolt. I'd guess that this makes cycling kind of picky since it doesn't have much to work with.
But yes, a semi-auto carbine in 22 TCM would be really welcome.
What’s the deal with the brace? Are they still being sold with a brace as a pistol?
Hey guys, the camera is over here!
$1,500 for a PCC with a barrel length that does nothing but add extra weight, wow what a deal!
Did you work the bugs out? Because if not, it's not remotely close to a budget PDW.
All I've ever wanted from Stribog is a version that takes EVO magazines. Guess I'll keep waiting.
They make lowers that take them. Look them up!
@@ameliacrasman9955 I know but they are hard to import here in europe and a factory solution is always better
Thank you for clarifying how to say STRIbog. Not streeeeebog. I hear they are coming out with gen 4 CZ style magainzes. Maybe 4th time is the charm because their mags suck donkey nutz
He didn't say anything, so either never or in two years. Future Prospects: Low.
This comment is offensive to donkey nutz. Stribog mags are much worse.
Was really hoping that was a Scorpion magazine factory lower.
Great Video.
I wonder if these will work properly
I wouldn’t buy a gen 1.
Are they going to sell just the bolt and mags to change to 22lr?
.22 works in a 9mm barrel?
I got the pak 9 because of cost constraints,but the stribog is admitted to be lighter,
James, what kind of book bag is that?
45acp Stribog A3? Boys I’m in!
I've been looking at these lately, on the fence with the mags having problems
Great news. The question is, where can I buy these guns? I live in Phoenix Arizona, but I can’t find them in any store.
Gun Broker. You should know this.
East Valley Tactical in Mesa
This is what a blowback PCC should cost with the feature set we want.
now that 45cap/10mm got me excited
Eagerly awaiting a 10mm Stribog.
Man I've been waiting for a .45 Stribog since they first came to market.
Hoping they do a double stack, double feed mag instead of just going with a shitty Glock mag. Also the A3 system.
nice reasonably priced and options like it all.
That Stribog guy is snazzy
Finally one in 10mm 😍
A great video nice guns.
New mag looks awesome
Nice
Would be nice if they stood behind their product and didn't use us early adopters as beta testers. Only to be told "buy gen 3 mags cus we aren't swapping all your broken gen 1 mags"
Hi, im a big fan. When are you at IWA? Evry day?
Interest in the 22
Does this Stribog actually work?
no. Don't buy one. More for me.
Who makes that bag you are wearing, James? I like it
did I hear binary trigger for the stribog?
Stribog 22lr with 300mm threaded barrel was one of my choices when was looking for
nice and compact 22lr trainer. But with AR stock adapter and shortened version was
costing bit much.
So i went to tippman m4-22 elite with 12.5 barrel. Least for now i havent been disapointed.
Running nicely with supressor and norma 22lr tac normal and subsonics.
Only complain about tippman is how expensive their magazines are.
I could get 2-3 stribog mags with same price.
Future will tell will i have Stribog in 9mm.
It is definelty not out of question if happen to need PCC
@@Jscot1001 In europe rifle/shotgun barrel can go short as 11.8 inch and supressors only recuire existing license to firearm.
But tippman mags are 85e while stibog mags 29e
Edit: Full price tax included.
@@Jscot1001 Yeah what i have learned whole pistol brace shitshow it doesnt look too good.
For us it doesnt matter do it have buffer tube or not because if getting short as possible
barrel then gun overall length needs to be least 600mm(23.6inch)
So folding stock will make it too short to be legally long gun.
We used to have category as any other weapon before miniman length was shortened
but now new license for gun in that category is pretty much same as full auto.
Unobtainium for civilian shooters.
Micro version looked good and i can guess how nice it is to stuff in backbag.
But if cant make it sbr then i cant see much of point because modifications
to put longer barrel will most likely cost more.
From our view whole pistol brace as circumvent to get shorter than 16 inch
rifles looked stupid even on a paper. And i was kind of sure that it will be
accepted as norm to have shorter rifles but last years have not been
too gentle for gunowners in states.
For us that War in Ukraine kind of halted hate against gun owners and we
arent least by now seen as next to devil. This year i think we will have
nice spike in dropped applications for sport guns(AR/AK) because
1 year active shooting as hobby is recuired to get semi-auto rifle with
unrestricted mags. (two years for pistol)
And When we look at calender we can see nice amount of people trying to get
club memberships and shooting courses right after invasion started at last year.
So overally it is also shitshow in here but if i had to choose i think it is more positive
than negative.
Did they really just say they designed a U.S. made String only magainze for 22r compliance? Instead of using US made Scorpion mags and having Scorpion mag compatibility? Are they really that stupid?
Really the only question that matters, are these reliable yet?
Where do I signup for 10mm? 🤩🤩🤩
Darn, the scorpion mag isn't a scorpion mag!
Very nice
When’s the bunarty
Should make one that uses K100 mags.
glock mags are very practical if your sidearm is a glock.....but the 33rd mag makes PCCs ugly....maybe for videos or photos just use th 20+ rounder glock mag
they actually make a good 50 round drum
they would sell more if they used scorpion mags
Need to offer 16-in standalone barrels and hand guards to update pistol configurations
I have the last generation sitting in my closet - it has never worked from day 1
I want one or two
I’d definitely get a shorty in 45
That telescoping stock tho =)
Binary trigger ….yum.
10mm hype!
Let do something about security on the guns
The Ramen army is strong in here.
Unicorns are more common in California than Stribogs are!
that arm brace being banned is hard to wrap my heads around, I have friends that are missing limbs or others that are elderly would also be considered at risk that this will effect, less we start making prosthetics into weapons they will stay vulnerable not sure how the FED considers these issues, I think this is how regular folks see it was this done in their best interest's?