ParadiseArcadeShop.com Sanwa JLF RGB LEF Joystick for Fightsticks
HTML-код
- Опубликовано: 12 май 2016
- Get Everything You need at:
www.paradisearcadeshop.com/
See the LED Programming and Button Installation Video Here:
• Paradise Arcade: Kaima...
Replacement JLF Shafts and RGB SHaft Kits are also compatible with the Hori Hayabusa Joystick:
i.imgur.com/mDVeGJY.jpg
i.imgur.com/aBVa8oG.jpg 
Игры
This video is amazing, and I'm glad you uploaded it as well as your other tutorials Fundando, really good stuff. I had a few questions regarding the barrier strip you used, as well as assembling the parts required to create your own LED joystick
1. Once acquired, do I need to solder the wires from the joystick and extra harness into the barrier strip, or is it a screw terminal? I was curious about how it actually worked.
2. Is there a specific type of barrier strip I need to buy? I see some on amazon with 600v 25A or 600v 15A. Which is better?
3. How does one assemble the joystick when buying all the parts separately? Specifically, how does one connect the LED wire into the joystick?
If you're able to answer any (or all) of my questions that'd be great. Thanks for your time.
So I've managed to get as far as soldering everything together and I've got the joystick lighting up, but I don't know how to get the joystick installed properly? It lights up but the motherboard doesn't recognize directional inputs? There's no 5-pin connector port on the Sanwa JLF Cherry mod. How do I connect the Cherry Sanwa to the Brook Board so that it may recognize the directional inputs??
Do you happen to know the specs for the Paradise Arcade RGB LED, Watts/voltage?
I love these joysticks! I just wish I knew of a concave button I could match the joystick with
if i did this and the stick led i wouldnt require an external power source at all? nor would it push the xbone or ps4 too hard to power it?
Will all this work in an original Hori RAP 1 for PS1/2?
is there a detachable led stick?
Is it required that you must have a Brook PCB for the Kaimana Mini PCB to work? Or are you able to use whichever one you choose?
you can use any common ground pcb if you use the kaimana adaptor?
So the soldering is optional right?
Mahalo😎🤙
question 1. So with the Adapter being mislabeled, both the leg wires and the harness wires need to be adjusted or just the led wires
queston 2. For programming, the joystick only has one led correct?
1. It only needs to be adjusted once. Swap green for red.
2. Yes
I wish this video had been available before I ordered all my stuff, I ordered the hollow shaft, balltop and LED along with the kaimana mini 8 button kit, and had asked if that was everything I needed. Wasn't told I needed further adaptors, and getting those shipped over to the UK on their own just isn't worth it... Quite possibly no LED Ball Top for me =(
+Ian Dingle I have been working with the folks over at PAS to bring these tutorials to you. I am sorry that I could not bring this to you in time.
In a similar position; looking towards making an order soon, but trying to get my head around absolutely everything required. Am I correct in assuming if I wanted to support all mainstream consoles from the past few decades I'd need a Brook Fighting Board (PS4, PS3, XBone, Xbox360), a Multi-Console Cthulhu (retro consoles) AND a padhack to support Sega Genesis? That sounds like a lot to achieve, so wondering if I want to complicate things by also implementing an illuminated stick.
tbh if you're using a Brook UFB adding a kaimana LED setup is very easy! it doesn't really complicate things all that much - I only had an issue because I unfortunately didn't order all the bits required to light the joystick as well and ordering them seperately to the UK is wayyyy to expensive.
So this drop-in kit is made for sanwa sticks, correct? So I should be able to drop all of these parts into a hori hayabusa, yeah?
+FullmetalShay Just got my Hayabusa Lever in the mail today! I had to shorten the shaft cover to fit better with the Hoku Balltop a little bit.I figured I might as well mount it. Check it Out
i.imgur.com/mDVeGJY.jpg
i.imgur.com/aBVa8oG.jpg
All JLF Shafts should be interchangeble.
Is there a way to send the arcade stick and to buy all the parts and send them to this store. Or somewhere where they can install it without having to do it myself ? This looks like a time consuming task I would prefer a profesional to install them
Agustin Kramer check and see if you have a local fgc group in your area. You can usually find a modest who can help you out.
Or hit up @vickomods one of the best I know and known personally for a couple decades.
So does this led mod work for Seimitsu levers as well? Or no?
Joseph Littaua yup
Can you buy the kit all together in one? I have looked at the site but I've no idea what to buy.
the tutorial tells you piece by piece
Two years later, I honestly think it should be an all-in-one, complete with slip ring and the exact same LED connectors that the button PCBs use.
Those buttons are real sanwa brand?
yes
been to your website, are you from Hawaii. I'm asking cause the web page say E Komo Mai
I think they are, but I think their store is based in Minneapolis US.
Can this work on the Mayflash f300 arcade sticks?
Yes but I hit a brick wall during the programming stage. The buttons light up but I'm having issues with programming. I can share pics and vids of my Mayflash f300 stick with this mod much help from paradise arcade support team. If a PSN I'll give you my psn Id
@@rj5485 what about the F500 and can u do a vid about it?
Problem solved! I'll post pics here soon.
@@2meal222, yes it will work! The f300 and f500 are almost the same. I'm sure the pcb is similar to the f300. The kaimana mod will work. Unfortunately I don't do vids on RUclips but you can friend me on PlayStation network if you have an account. My PSN is Roscoe369
I finally figured out how to use the brightstick led webkit. Now ichave a never b4 seen on RUclips f300
where did you get that case from?
Raymundo Salas foehammer. Hit them up on Facebook messenger
Thank for the reply and by the way , of all the cases that you already tested, which one do you prefer?
Do they sell already done built ones?
damarlboromans no but this one is for sale 250 plus shipping.
Do you want to twist the LED wires and break them in a week, because that's how you twist the LED wires and break them in a week.
lol this thing is still working today. Although one I had to replace one of the buttons.
Are you gonna sell those kit on ebay soon?
This is hilarious. This company literally wants to nickel and dime you... lmao. You have to purchase the ball, the rod, the harness, and every god damn pieces. When assembled, it’s nothing but multicolor RGB. Not even sanwa quality but you will pay about $70. Why? That thing is trash.