Full Guide Easy To Make LED Arcade Fighting Stick
HTML-код
- Опубликовано: 23 авг 2024
- Step by step using this easy to make acrylic arcade case - 10 buttons total.
Acrylic Case: amzn.to/2hFzNd7
Buttons Amazon: amzn.to/2yNYyXD
Wiring harness: amzn.to/2zLBSL1
Buttons from Banggood (2 player): goo.gl/Ruuk3C
My previous build: • Building LED Arcade St...
-- TIP JAR --
Paypal | paypal.me/drew...
Patreon | / drewtalks
-- Preferred Pi Products --
Raspberry Pie 3 KIT- | amzn.to/2gtxyWC
Raspberry Pie Zero W KIT- | amzn.to/2gtxyWC
400gb micro sd | amzn.to/2glVtpH
256gb micro sd | amzn.to/2iKLj6v
200gb micro sd | amzn.to/2nblXij
128gb micro sd | amzn.to/2wr82b2
64gb micro sd | amzn.to/2iJYbK6
32gb micro sd | amzn.to/2xQ1kel
16gb micro sd | amzn.to/2glOLAb
-- Preferred Pi Controllers --
Do Everything Wireless Controller | amzn.to/2vjEUEq
Classic SNES Style | amzn.to/2uWJOGu
Slick Controller Wi U | amzn.to/2f9piwK
Serious Contender | amzn.to/2viQxeQ
I’m broke but wanna game | amzn.to/2u4F56M
Xbox 360 Controller | amzn.to/2vj1WLJ
Killer Wired Controller | amzn.to/2f8YoVO
-- RUclips GEAR / RECORDING --
Capture Card | amzn.to/2kNZ4lm
Computer | amzn.to/2vgN3d3
WebCam | amzn.to/2pNIaT7
Headset | amzn.to/2uWISjF
Mic | amzn.to/2wjuzW1
Tripod | amzn.to/2uTpoOt
Nice SLR Camera | amzn.to/2fbmZna
Nice SLR Camera Lens | amzn.to/2vRlCqQ
Keyboard | goo.gl/gBbJFS
Mouse | goo.gl/MuqoMQ
Backdrop support | amzn.to/2osFyZI
Green Screen | amzn.to/2oQiJBI
I feel so fortunate that Arcade controllers are still a thing in this day and age. Always felt weird to play Street Fighter, Mortal Kombat, or Soul Calibur with anything but the Arcade setup.
The fact we get LED buttons is just gravy.
Hi Drew from 2021. I just built the same fight stick with blue LEDs. Only difference is I use the encoder’s power supply for the LEDs. Your video was indispensable to its successful wiring because the stick/button kit came with no manual. I’m replacing the kit stick with a Sanwa stick next week. Cheers.
Can I ask... Why did you feel you had to power the LEDs separately? Is the 5v line from the board not enough to do this? Is the USB power supplied by Raspberry Pi not enough to power the LEDs in the switches?
Why you don t connect led wires to the board 5v socket ?Or your board doesnt have?
Great video. Bonus points if this guide included integrating a raspberry pi 3 into the arcade stick including on/off switch :)
On second thought integrating the pi may not be worthwhile. just velcro it on the back side so it's easy to swap cards but just as hidden as if it were inside the enclosure.
I have the parts for the previous stick you built coming in on Monday. Gonna see if my son wants to build it with me over the Thanksgiving weekend. I'll show him your vids as a primer-instructional.
NICE! Post pics when your done!
do you know hownto make buttons be iluminated when are pressed?
Do you know if you can use another board or settings so that the buttons are just iluminated when pressed? I saw it a while ago in another video but they didn't explain how that was done...
Awsome video🖒. Saved me a headache.. bought a 2 player led kit from China.. didn't realize they didn't included the wires for the led lights. Why.?.. no clue... but bought a separate wire set..i like the rigging to the old charger plug in...u can not have the lights on if your not feeling it at moment..Thanks a lot
Man that China bit made my day :)
I logged in strictly to 'Like' this video for the China bit haha
Im glad someone appreciates it ;)
lol I got a kick out of the China bit also lol
HYSTERICAL!
if you have led lights you can play without room light
Can u play kickharness games on a super gun with this mortal kombat tekken etc.
Muy bien… very easy, very easy… muy fácil…😬😬😬😬😂😂😂😂😂😂 ni hablar… Saludo a todos…
Thank you Drew for the video. Sorry but still not understanding which of the 4 pins on the bottom of the led button are for power and which are for gaming. Is there a way to tell? I could’t zoom in on your video.
I know this is an old video... But no. You dont "push to much juice, use too many watts" when it comes to power supplies. LEDs reguire a certain voltage, amps is the maximum current draw the power brick can support. So as long as the brick is big enough (amp wise) to support bulbs and is the right voltage you are fine. You don't "push" watts or amps, it refers to the capability of the power supply.
Awesome build bro!!! Can you wire it so that the LED’s light up through the USB??? Not an additional USB but one USB that once plugged in will power the arcade stick and the LED lights!!!
Have you found out yet?
How well does the configuration of this work on the pandora box?
Are these sanwa parts?
Those are good responsive buttons ?
Why is there a power cable coming out of it?
For the LEDs. check out around 8:50ish.
@@brannenthompson9662 no need for a power cable if setup properly. The USB encoder boards can be setup to pull power directly from the device. All of my USB sticks with LEDS I have setup only have 1 cable and it is the usb. Perhaps this is a really old encoder board.
Ok just to be sure, if you have a PC with MAME, you don't need to have a raspberry pi board, just the black cases, the buttons, LEDs and the wires you hooked and VOILA, case closed right?
You need a controller board which is usually included with the buttons
Was that the card where you plugged your buttons wires into that had a USB end?
Yes
@@drewtalks Alright thanks. It would be nice that the LEDs draw their power from the USB. We would have 1 less wire. Also do you know if they have another version with a trackball or/and a spinner? They would really challenge X-Arcade and their tankstick.
were just getting into making content for our company and we really like your format that you use. Especially your intro logo. That's excellent!
Hi
I have a pc mame arcade machine.
Is there any encoder you recommend I can use the same joystick with the ps3. I would like plug my ps3 inside my arcade machine.
I've not really thought about this but, can't you use the USB for the LEDs? I will check it out, but I just thought maybe someone else is thinking about it too. and I'm being a bit lazy hoping someone will come up with the answer, LoL.
I tried this today..but it did not work for me...used a spade connector did daisy chain and connected to old blackberry charger 5v...but no light :(
what was the plane game you played? the music was fucking bad ass...
where i can find the screwdriver on min 5.21???
5:25 Simon Belmont theme 😁
Will this work on ps4?
What button brand are those?
My led lights flicker when moving the joystick. Check all the wiring and it's fine. Why is that?
Did you connect the light wires directly to your usb decoder? If not it could be that one of the black cables are touching a red one through the metalic head causing the lights to go off and on again.
Hi drew I'm sorry for this comment but really realy i want a help
I have jouy arcade i put in my cabinet. And i put img but not working the button in game just in emulationstation. I did reset for configure control and same proplem. this is in to img. I used last one called grapper i think. But i remember i installed the keyboard in other img and when i put in thes new img it's working without install. Also the joystick player two not detected i don't know why. Can you help me pleas i feel so bad my cabinet now i working it until 8 month's pls
digital town شركة بلدة الرقميات
Can you test player 2 joystick on player 1 position to rule out the joystick?
aguyandhiscomputer yes i tested it's working but i want u know my board GPIO it's different model jy-02 in board i have input 2 players not like other board just one player. Means i used one board and one usb cable
Could you not get power to the lights via the USB connection?
Its a lot of drain of power on the pi
Nice
Noice
is this possible to replace these “china” buttons with sanwa that fits?😅
yes you can ;)
Would a Pandora box fit in this case?
not sure how bigs a pandoras box?
Hey Drew! Really love your videos. So, I have the exact same arcade buttons kit but for two players. Should I power each player buttons to one power supply? Also, do you know if I can set Select as a Hotkey button at the same time? Because I have 6-buttons layout plus 4 buttons for Player 1-2 Start and Coin, plus 2 pinball buttons.
all the buttons should go through the encoder board which is one usb and all the leds through one power led wire chain with dedicated power plug. to exit is hotkey plus "start" i use select as hotkey
Thank you for the quick reply Drew. Select = Coin button?
Yes
Are there any versions of this that use a tracball?
Haven't seen one yet sadly.
Suction cup?
Yeah to like stick it to surfaces so it does not move
@@drewtalks ohh right right I was thinking of the buttons for some reason haha thanks
How does the stick and buttons feel
They feel great! I am sure there are better but they are good budget options
Is it compatible with street fighter 5
Anyone tried powering the leds off the USB power?
You mean the normal way? Yes and it works fine that way without the hassle of running a power cable.
@@fireislandHD yes I did solder into the power and works fine
Is the joystick 8 way only
You can rotate a plastic thingy on the bottom to change it to 4 way.
4:12 RIP headphones and eardrums
sorry broski
Bro, can I connect this to xbox 360 directly?
I think it needs to have an Xbox 360 pcb board installed to make it work I could be wrong.
Be honest about that joystick how long did it last you I broke 2 of them same ones smh never again
Ghost Mode I personally prefer the Japanese versions that are longer and bigger without that stupid ball
If it's this easy to make one of these why are companies overcharging by so much for almost the same quality as this.
Probably out of convenience. Most people are lazy and end up paying for it in the end. Not everyone wants to learn how to hook up electronics or learn each separate component. It's cheaper to diy.
CHINA
damn right is china hahahahaha
I voted for Trump.