Видео

The gun is nice the video is nice but hold up a min … sir is that an IWC watch on your wrist ?!?

How well on a 40 round mag does it fit

Nice information, Is this guy still in buisness cant seem to find his store on ebay. if you do have a web site or another name for this seller that would be great.

You can use breakthrough's solvent cleaner and carbon remover to get those stains off the finish. Blue wonder does an excellent all around cleaner. Use can use white nail polish base if you replace the orange sight sticker. Flow up with a bright orange nail polish to fill in and bring out the frobt sight. You can add a coat of glow in the dark nail polish on the white or orange to get it to bright ip and glow in low light conditions. Hogue grips are ideal although Taurus offers a replacement grip on their site as an upgrafe for less than $10.00+ s/h.

17:52 OMG I feel so damn dumb The firing pin would flop out and this explained it Thank you!!

I've been reloading for 48 years and pistol, never have had a problem. Rifle is different. The only time I use new brass for pistol for ccw.

will it fit red dots

Great video and great information

Taurus has recall issues starting from at least 1993-2024 they didn't get a bad rap! Will only buy Taurus revolvers like the Tracker and have a couple of Raging Bulls in .454 Casull . Had to send a Taurus 92 FS for service in 1998 and it took five months to get it back, due to lack of parts.

I wouldn’t waste money on 9mm since it’s so plentiful where I live. I do purchase .45 Colt, .357 and maybe a few others. If I needed to, I would buy it like you do.

How have they held up? Ever since then?

Well, I know this video was done years ago but could someone give me the link for these parts? It isn't showing up for me to use. Thanks

If you loosen it back and then tighten it. That’s key thing. It’s way easier for timing

Hello, can you buy any brass to reload with hodgdon powder? im new to reloading .I understand the process of loading. I was curious about that question .

How do you know it's a high quality bearing ?

lead removal cloth will remove that burning on the cylinder

Sooooooo jealous watching u being able to turn the muzzle, Im from a communist fucking state

Taurus has a new grip for the tracker and judge its nice check that one out

Those frames are notoriously easy to scratch.

Oh, that looks excellent. I'd been using some harbor freight cases that appear to be pelican clones, but they're too shallow to stand up pistols like this, foam is a pretty low density too. This would be perfect for consolidating my handguns into a smaller space.

I ordered exactly same case.

When you consider that a mechanical watch with 150 tiny parts can sell for $50, this is just way too expensive.

I’ve put about 500 rounds through my 66. It’s not as refined as my Smith, but I haven’t had any problems with it. I don’t care for the plunger set up on the cradle. You have to make sure that stays clean. Dirty powder on my reloads caused some minor malfunctions.

Great informative video.

I just bought one of these for my 20 rounder because I backpack carry it for reasons and adding 5 more rounds to a 20 rounder is nice and it doesn't extend very far

you need to put more powder in hopper !!!!!!!

Currently building a rifle that is intended to be used for 3 gun/ multi gun purposes and am looking at the scalarworks leap08 mount. They offer it in the following 2 heights: 1.57 and 1.93. Which height would you recommend?

I have been using this for a few months now and love it. I have it on my Lee Classic Turret, Lee 6000, and will be purchasing another on for my new Hornaday Lock-N-Load AP which I'm very excited about. One tip I can pass on, with .223 on my Lee 6000 the indicator rod which slides up and down sometimes touches the case and raises much higher than the white O-Ring. Being that there is a cone to guide the case, and the sliding rod hangs below it this can happen. So I am adding another O-Ring (black) to hold the rod up a little so it is above the cone. That should guide the case better and avoid the false overfill appearance. Don't know why RCBS didn't think of this

Most of my brass I pick up at the range. About half of it is mine, the rest is left on the range. I've given calibers I don't reload to family that reload and I've given some to a crafter who uses spent brass. By the time I give it to them it is deprimed and cleand.

I’m waiting on a Taurus 66 from gunbroker. I’m really excited. I have a smith already. I was thinking of Altamont wood grips, myself. I’ll probably just paint that front sight.

Great info. Love the shirt, from NoCo here

Great video

Thanks! Very helpful.

I read applying oven cleaner to the areas that are difficult to clean! Leave it on for a few minutes before removing!

Just did this same process to my new 9mm and so easy to do and im a very impatient guy lol

I don't buy anything from diamond k. They charge more than double the prices Grafs , Midway and Midsouth charge. Diamond K price gouges so blatantly that they must be in bed with Cheaper Than Dirt. They are both unscrupulous and predatory. I will never buy anything from them.

I just started reloading and my Hornady Powder Measure does the same with the Varget powder. It sticks like some of the extruded particles are not 100% in the slot. I thought it was just me ! Thanks ps: my weight variances were between 24.8 and 25.2 and I wanted 25. A couple of extruded particles makes a big difference in weight.

Just picked up one of these. Video is definitely helpful just watching someone else go through it.

HK puts a lot of packing grease in it don't they!

If your gun is cerakoted can u still do this?

Can i use non acetone instead of mineral spirit?

Birchwood Casey, lead remover cloth , im gonna try it this weekend , says for burn rings

I have a 550B and the XL650, I prefer the 650 priming but being able to turn it off is an improvement fur sure, probably why the 750 has the 550 style priming system. Going to get one of these for sure.

Thanks for the vid. Just ordered the kit for my 650. Semper Fi, Bro!

I cannot find anywhere 6.5 Grendel I ended up buying brand new hornady 6.5 Grendel brass for .80 each Now I need 7.62x39 brass

Would a S&W 686+ with the 6 inch barrel fit in there? 🤔

: Which way did you place the washer concave in or concave out? 🤔 🤔 🤔

I hate how all those powder adjustment knobs have the graduations on the back of the knob. How about putting them on the side that’s facing us🤷‍♂️

Sorry, but this is a really bad test setup. 1st: Your scale is shit. Get a good scale. 2nd: You try to measure pistol loads with the rifle insert of the Power Measure. This could not work! You need to use the pistol insert. 3rd: You are dropping some flakes of powder onto the table.

Great vid, I see its been a while since you posted. Hope you are well sir.