Taurus 627 Tracker
HTML-код
- Опубликовано: 13 сен 2024
- Tabletop of the Taurus 627 Tracker. A very fun gun to add to my collection. Its a new caliber to me and all this one has seen are my reloads. This is a entry level 357 for sure but it fits my needs just fine!!
Not sure if your still looking, but I got the Hogue Grips today, and they change the feel drastically. The trigger was a little hard to reach and the hogue grip made my hand melt into the gun. Also makes it look more classy.
Taurus has recall issues starting from at least 1993-2024 they didn't get a bad rap! Will only buy Taurus revolvers like the Tracker and have a couple of Raging Bulls in .454 Casull . Had to send a Taurus 92 FS for service in 1998 and it took five months to get it back, due to lack of parts.
Birchwood Casey, lead remover cloth , im gonna try it this weekend , says for burn rings
You can use blue wonder not only for carbon cleaning, de leading, and rust removal, but also for burn rings as well.
You can use breakthrough's solvent cleaner and carbon remover to get those stains off the finish. Blue wonder does an excellent all around cleaner. Use can use white nail polish base if you replace the orange sight sticker. Flow up with a bright orange nail polish to fill in and bring out the frobt sight. You can add a coat of glow in the dark nail polish on the white or orange to get it to bright ip and glow in low light conditions. Hogue grips are ideal although Taurus offers a replacement grip on their site as an upgrafe for less than $10.00+ s/h.
Just ordered one today with the 6.5" barrel from Cheaper Than Dirt for just under $400. Can't wait to get it!!
lead removal cloth will remove that burning on the cylinder
I’m waiting on a Taurus 66 from gunbroker. I’m really excited. I have a smith already. I was thinking of Altamont wood grips, myself. I’ll probably just paint that front sight.
let us know how you like it!!
I’ve put about 500 rounds through my 66. It’s not as refined as my Smith, but I haven’t had any problems with it. I don’t care for the plunger set up on the cradle. You have to make sure that stays clean. Dirty powder on my reloads caused some minor malfunctions.
Taurus has a new grip for the tracker and judge its nice check that one out
I read applying oven cleaner to the areas that are difficult to clean! Leave it on for a few minutes before removing!
I want to see a judge wood grips on a tracker. You can buy a hi viz sight for a Smith and wesson to fit it. They come undrilled so you need to do that.
wheelie time thanks for the comment. I'll look into it!
I use the Hornady 125gr JHP for my loads. I use Long Shot for .38 +P loads.
I have the same gun , no problem with at all, I open carry it ( TEXAS) get many responses. 357 mag.
Bought the wood (ebay) perfect fit beautiful grips. ($30+) 👍🏻👍🏻🔫👍🏻
What is the grip that you got for this revolver called?
I think the placement of the lock is better than smith and Wesson on the side but I lock it when I travel or leave my hotel room that way I don’t arm the bad guy
I seen the pachmayr grips i didnt exactly think it would fit on the tracker 627........ Other videos i seen didnt have pachmayr grip on them you will be the first so surprise me and make a video of it on the tracker
Hogue makes a grip that works. For me I would prefer a wood grip for mine, but I am used to wood as my S&W model 29 has wood. I still use the original grips as they work well. It is personal preference as to what you like.
The gun is nice the video is nice but hold up a min … sir is that an IWC watch on your wrist ?!?
There is no "finish" to take off. Altamont Grips. Judge fits Trackers. Jarawa on Ebay has a variety. I have one Altamont & 1 Jaruwan.p . Tape for "sticker" is available at auto parts store "reflective" tape.
Greg B thanks for the great info!!
I'm sorry , misspelled the company name changed above. JARUWAN.P store on eBay. Judge fits Tracker too. I like mine . There are a couple of different styles. Look carefully. Good product for the money.
Put the Pachmayr grips on mine. Feels great. full grip. Amazing how much recoil the Pachmayr absorbs. Have had my Taurus since 2001 and never a problem.
Would you have the part number for the grips would you? I'm happy to hear that yours has been trouble free!! Thank you for the comment!
Bravo1Xray, Fortunately Amazon keeps your purchase order record. The item model # is 02473 and costs $20.24. Easy install. 5 min. or less. Enjoy
changed my to pachmayr grips orig sucked. mine is titanium
finpainter1 do you know the exact model number you used? I've heard about some fitment issues.
Does this particular gun the Taurus model 627 require Moon clips?
I'm not sure to be honest. I haven't even looked for any type of speed loader for it. I use it mostly as a range gun so no real need. Thank you for the question!
If you've shot reloads or buffalo bore out of it you voided the warranty.
They earned that bad rap.
No they did not.
@@carll.freemanjr.9867 Yes they did. Customer service sucks!
It works yeah, it’s cheap yeah but no pride of ownership. If you want a revolver you can be proud of get a smith or a colt. They cost 4 x the Taurus in this part of the globe
People are proud of all kinds of things one man's treasure may be another's junk I think it looks badass and have heard a whole lot more good then bad in the reviews as for my self for the money I'm going to own one very soon I don't know yet until I get it if I think it can be done I' have a nice piece of cedar I'm going to try to make some grip pieces for it. If so I think it will look sweet?