![SwedeMachine](/img/default-banner.jpg)
- Видео 80
- Просмотров 3 503 114
SwedeMachine
США
Добавлен 13 янв 2014
Join me on my journey as we explore the fun world of getting automobiles back on the road. My main focus will be to awaken old iron that have been sleeping for far too long, as well as repairing iron that needs help. This channel was started and named by my purchasing Edd the Volvo (old family car) from my Uncle and Aunt for restoration and also named for my Swedish side of my family. Click on the Community Tab for updates. If you get lost in my videos, most are organized under the playlist tab. Thanks for stopping by!
Credits:
VHS Noise in 4k by Pauls Vids
Credits:
VHS Noise in 4k by Pauls Vids
I HATE Tire Service Companies - 2018 Subaru Forester Lug Studs and Nuts Replacement
Some company did my friend dirty. BAD dirty. They put tires on the Subaru after "servicing" and broke at least 5 lug studs. ALL TIRES had some form of either broken lug studs and or nuts. Also they put on mix-matched lug nuts as well. The mechanic told the customer to send it, and their service writer also told them: "Its fine don't worry about it." Unbelievable! We will right the wrong that the incompetent mechanics and tire company has done.
Просмотров: 1 318
Видео
Stuffing a Toolbox Into the Service Truck
Просмотров 1,2 тыс.Месяц назад
I purchased a toolbox from Home Depot. Lets see if I can just barely squeeze it into my service truck. Some angle grinders, cutting torches, and whiz wheels will be the name of the game today......as well inadvertently starting to catch my truck on fire..... Sorted George's 65 Coronet ruclips.net/video/ZdQrvGFbbRM/видео.html
Swapping Tires On the Troy-Bilt Horse Tiller Without Removing Rims
Просмотров 5 тыс.2 месяца назад
I wanted to show everyone how you can remove our tire on your tiller without removing the rim in case your rims are frozen to the drive axle. We will be replacing the turf style tire with a more aggressive cleat style traction tire for better gripping in soft dirt. Tire is the factory 4.80/4.00x8. You might need a bead buster (which is shown in the video) in order to break the tire bead from th...
John Deere 1050 Water In Engine Oil! What Broke? Gaskets? Cyl Liners? (Yanmar 3T90T)
Просмотров 1,8 тыс.2 месяца назад
This John Deere 1050 tractor was being driven and overheated on the operator. Operator checked the coolant when the engine cooled down and noticed most of the water was gone. The oil level was checked and was found that the coolant had leaked into the crankcase as the oil was grey and the oil level rose by ~2 inches! Yikes! What happened? Watch and find out! We take the cylinder head off, exami...
Fixing All Gauges: Ammeter, Temp, Fuel, Oil Pressure Gauge, Instrument Voltage Reg. 1968 Ford F-350
Просмотров 8443 месяца назад
Fixing an instrument cluster gauge set on a 68 F-350 where not one gauge was working correctly or was erroneously reporting information. We look at most of the circuit wires and components including the IVR (Instrument Voltage Regulator).
Removing the Front Clip on the Fire Damaged 77 Ford F250
Просмотров 8013 месяца назад
Removal of the front clip on the 77 F250 so I can get to the firewall to later scrub it down and freshen it up before the engine install.
Installing A Manual Choke for an Edelbrock 1406 Carburetor on a 68 Ford F350
Просмотров 1,5 тыс.4 месяца назад
This 68 Ford F350 dump bed came without a working choke. Sssooo lets fix it! This video will also prove useful if you want to convert your automatic electric choke to a full manual choke. Manual Choke Kit allcarbs.com/product/edelbrock-manual-choke-kit/
Interior Strip on the 77 F20 Super Cab Ranger XLT
Просмотров 8655 месяцев назад
In this episode my Brosif aka "TransAmHologram" starts to teardown the interior of his 77 pickup. Also reveled is some rust "issues" that we might have to address. Goodie haha www.youtube.com/@TransAmHologram
How to Extract Cylinder Head Exhaust Studs
Просмотров 9436 месяцев назад
Today we work on broken exhaust bolt studs. Every mechanics favorite subject!! We use both the drill and tap method as well as fire and ice. Results? Favorable. Sorted George Garage Link: @SortedGeorgeGarage
Dismounting and Remounting Split Ring Rim Wheels
Просмотров 2,1 тыс.7 месяцев назад
What is it like to work on ancient split ring rim wheels with biased tires and tubes? A PAIN!!! But for demonstration purposes we will dig into what it takes to break them down and reassemble them.
How To Remove a Frozen Piston From an Engine...... with a 10 LB Sledgehammer!
Просмотров 2,6 тыс.7 месяцев назад
YES! We push those piston pounders from there frozen holes. And goodness sake what a chore that was. We will also explore if this engine can get away with a refurbishment or if it will need a rebuild. Sorted George Garage www.youtube.com/@SortedGeorgeGarage
Engine Removal Day for the 1977 Ford F-250 Ranger XLT Super Cab
Просмотров 2,2 тыс.7 месяцев назад
The big ol' 460CI powerplant finally comes out of its fire laden grave. One step closer tooo......... I don't know...madness? Ya ya lets roll with that.
Is the Ford 460 Engine Frozen? - 1977 Ford F-250 Ranger XLT Super Cab
Просмотров 1,5 тыс.7 месяцев назад
We finally find out if the 460 engine is frozen! As well as what direction we shall proceed with said power plant. (The direction I'm sure will most likely be in a circular pattern as is proper here haha!)
My First Tow with Lil' Tugger - Towing the 1977 Ford F250 XLT Ranger Super Cab
Просмотров 2,3 тыс.7 месяцев назад
I hooked up Lil' Tugger for the journey back. There was plenty of prep such as tire swapping, dropping drivelines, and after the tow was over? Oh no more brilliant surprises that I could have done without!
What is the True Mileage on the 1977 Ford F250 XLT Ranger Super Cab?
Просмотров 1,3 тыс.8 месяцев назад
What is the True Mileage on the 1977 Ford F250 XLT Ranger Super Cab?
Build Sheet Found! Plus Interior Rip-out - 1977 Ford F250 XLT Ranger Super Cab
Просмотров 1,3 тыс.8 месяцев назад
Build Sheet Found! Plus Interior Rip-out - 1977 Ford F250 XLT Ranger Super Cab
Engine Fire Reveal and Wash Day - 1977 Ford F250 XLT Ranger Super Cab?
Просмотров 2,9 тыс.8 месяцев назад
Engine Fire Reveal and Wash Day - 1977 Ford F250 XLT Ranger Super Cab?
Rescued 17 Years After an Engine Fire - 1977 Ford F250 XLT Ranger Super Cab 460 CI
Просмотров 4,2 тыс.8 месяцев назад
Rescued 17 Years After an Engine Fire - 1977 Ford F250 XLT Ranger Super Cab 460 CI
Trying To Open the Driver Door on Lil Tugger
Просмотров 8989 месяцев назад
Trying To Open the Driver Door on Lil Tugger
I Bought My 1st Tow Truck "Lil Tugger" -1989 International S1900 DT466 Holmes 500 Split Boom Wrecker
Просмотров 8 тыс.9 месяцев назад
I Bought My 1st Tow Truck "Lil Tugger" -1989 International S1900 DT466 Holmes 500 Split Boom Wrecker
Ride Along 1971 Chrysler New Yorker - End of a Series
Просмотров 2,9 тыс.9 месяцев назад
Ride Along 1971 Chrysler New Yorker - End of a Series
New Tires for the 1971 Chrysler New Yorker!
Просмотров 1,6 тыс.9 месяцев назад
New Tires for the 1971 Chrysler New Yorker!
Electrical Shenanigans (Thank You Rodents) - 1971 Chrysler New Yorker
Просмотров 98010 месяцев назад
Electrical Shenanigans (Thank You Rodents) - 1971 Chrysler New Yorker
Loving my Levers - Unfreezing Bucket Lever Controls - 1959 Case Tractor 300
Просмотров 1,1 тыс.11 месяцев назад
Loving my Levers - Unfreezing Bucket Lever Controls - 1959 Case Tractor 300
I forgot something on the 1971 NewYorker..............
Просмотров 1,5 тыс.Год назад
I forgot something on the 1971 NewYorker..............
Generator Not Charging Battery? Testing Generator and Regulator on the 1959 Case 300 Tractor
Просмотров 2,5 тыс.Год назад
Generator Not Charging Battery? Testing Generator and Regulator on the 1959 Case 300 Tractor
1991 Oldsmobile Ninety-Eight Rare Touring Sedan Edition - Tour and Ride Along
Просмотров 4,2 тыс.Год назад
1991 Oldsmobile Ninety-Eight Rare Touring Sedan Edition - Tour and Ride Along
Minor Tuneup on the 3.8l 1991 Oldsmobile Ninety-Eight Touring Sedan
Просмотров 1 тыс.Год назад
Minor Tuneup on the 3.8l 1991 Oldsmobile Ninety-Eight Touring Sedan
Pressure Wash and Cleanup - 91 Oldsmobile Ninety-Eight
Просмотров 1 тыс.Год назад
Pressure Wash and Cleanup - 91 Oldsmobile Ninety-Eight
1991 Oldsmobile Ninety-Eight Touring Sedan Edition - Fuel Pump Fuse Issues
Просмотров 3,5 тыс.Год назад
1991 Oldsmobile Ninety-Eight Touring Sedan Edition - Fuel Pump Fuse Issues
From 91 to 96 when Gm brought back the big cars I thought the Oldes was the nicest.
The seats alone are really plush!
Good job
Glad to see you're getting your boy into cars
Yeah these trucks are kind of money pits, but nothing like the 04 Silverado (NYS car) that I drove till the frame snapped and I threw the towel... After countless thousands of dollars and time in repairs and upgrades. I'll keep the old non-catalyst dentside 350 thanks
They are money pits but are simple money pits with no computers. Once you rebuild everything and maintain it, it’s going to last 💪🏼🔥
@@SwedeMachine Exactly. Just like the other dinosaur rigs I have replaced my modern junk with. Real V8s with carbs and points for the win. That being said, I'd love me a nice 6-inline carb'd sewing machine...
😎🏴☠️
i have to do a forklift wheel like this after the weekend. wish me luck
Ooof! Best of luck next week boss🫠💪🏼👏🏼
Well done SM, can't believe they let her go leaving the studs and nuts like that. Looking forward to seeing the next installment of old yeller too. 🤠
Bless☺️✌🏼
Just another note here Swede. I don't remember having to remove the hub assembly to replace studs. They usually have openings where the stud can be driven through the back and the new one pulled thru with an impact, lug and washer. Would that apply here by chance Internet People?
It might. I wasn’t paying attention to be honest. Hopefully someone else can chime in here👍🏼
Must've taken them to a Les Schwab lmao
Things have been worse since Les died I’ve noticed
@@SwedeMachine Much worse
I use Tirerack's mobile installation... that way I can watch them like a hawk!
Ohh there you go!
You are misinforming a lot of people on this subject. 10 years of tire service I can tell you that every lug or stud I ever broke was from taking the nut off and never putting it on. Because of this you would have to go back to the previous installer usually the owners that cross threaded the nut on the stud putting it on. This situation would automatically become my fault and my responsibility to repair because it broke when taking it off. The exact accusation that you make in this video. I can tell by looking this is exactly what happened to these lugs. Most likely previously rammed on with an impact and not started by hand as you correctly did in your video. Great repair job by the way.
There are still good mechanics out there. Glad you’re one of them. It’s a shame how much effort you have to go thru these days to find one. Thanks for stopping by.
I liked how you got rid of ALL of the lug studs and nuts and replaced with new! no tellin what stage of fucked up the others were and no reason to play Russian roulette with semi screwed up parts> here in North Carolina we had a company come in and buy out a VERY reliable trusted tire service chain and now they jacked their hourly rate to more than $150!!! AND ttheir work, service and attitude turned to garbage! Caveat emptor! (Latin for buyer beware!)
WOAH!! $150 / hr? Sheesh if I had to pay that I’d better be at the dealership getting repairs! Yes, there was no way I would trust any of that hardware. I told my friend we are placing all 20 studs, and 20 nuts. That’s the only way I could guarantee safety 😉
Why can't you name the company
I would love to name and shame. However I also don’t need internet harassment to muck up the ability for my friend to get a conflict resolution from said company.
@@SwedeMachine Agreed / Thank you
Valid question and most welcome
First of all, tire breakers make minimum wage (or as close as possible), usually means untrained kids and temporary employees. Typically you find a problem created the last time the wheels were installed the next time you need to remove them. As far as mis-mached nuts, I worked in a university city with 7 auto parts stores and often couldn't find 5 correct lug nuts for common US cars, let alone 12 x 1.25 Japanese lug nuts. Still sending it without repairs is not cool, unless the customer specifically refused repairs.
You know your lug nut thread pitch size. Very good! Yes even if they had to order them it would only take a few days to get them. I get it some parts are not commonly in stock and you’ve got to chase them down. That’s fine. Due to slight surface rust on the broken studs it’s been more than a few days. Probably months I’m guessing. I’d have to ask the owner. So there was more than enough time to fix them. I know we all start somewhere with our skill set, but this is a pretty crucial piece of hardware that definitely demands special attention. Thank you for sharing👍🏼
Modern air impact guns can easily reach 1200lb. ft. I know that it’s more trouble but I used a torque wrench to finish tightening wheels after running the nuts up snug with an air gun. Due to the massive number of guys getting out of the automotive industry many places have hired warm bodies to try to fill the gaps. 80% of young graduates of automotive repair schools quit within the first two years after graduating. It’s got exponentially worse post-Wuhan lockdowns. Unfortunately it’s not going to get better anytime soon. The exodus of good people from the automotive industry has been an ongoing problem for at least 25 years and it hasn’t caused any significant change in how shops compensate good workers.
I agree and it’s a shame and scary. The ol’Rona didn’t do any good for the blue collar worker. 1200 lbs? Sheesh well there you go. I am grateful that I got my degree and can use it to help people in need like this. My heart really goes out to those single parents with kids who don’t have time to mess about repairing their car and get hosed like this. If anyone knows of such a situation please do them a solid if practicable. Thanks for sharing✌🏼
Had a tire shop ruin a set of original 5x5.5 Lincoln steelies, they uggadugga'd the nuts on so far the cones bottomed out on the face of the brake drums, completely flattening the center section of the steel wheels. Once loosened back out, the wheels were unsafe to use as they wouldn't clamp properly anymore. They ended up begrudgingly paying me enough for new wheels. Since factory replacement 5x5.5 steelies aren't cheap, I ended up buying a used set off a friend and used the rest of the reimbursement to get the old wheels repaired and refinished. Fortunately a couple years ago I found a small tire shop with good, honest folk. I've become a repeat customer and they have noticed that too, I've gotten good deals and discounts a few times!
They flattened the steel wheels mounting surface? Wow! I’m glad you eventually found a competent shop. They’re out there, but sometimes the journey to find them can be very rough. Yikes man!
And this is why I have been forced into being the competent journeyman mechanic that I am. Too often burned by allegedly professional outfits so now I look after myself my family and friends. I just need a bigger space then I can have more and do more.
Good for you! I’ve struggled with space myself. But to have your repairs done right by yourself is huge!
As a mechanic for 45 years I've seen so much of this crap. Hey if you break it be a pro and fix it ! I recently had new tires put on my 2011 RAM. By PEP boys. The musta used the most powerful impact wrench ever made to my lug nuts ! Ended up breaking about half of the bolts to get them off. Took literally 2 days to get done ! I brought them all back to the same PEP boys and tossed them on the service counter and ask for Benny, the guy who did the tires so I could very politely tell him to take each and every nut and bolt and slowly as to no do major damage to his asshole place beach one as far up his ass he can get then, no use for penetration oil or motor oil is to be used. Then a lovely young woman, tiny and petite came up and smiles at me and announced she is Benny.........I just proceeded to walk out with my nuts in my hand, got to my truck and cried !
Wow! You broke half if them! Sheesh man. That’s crazy! I agree. If you break it, then let me know and fix it. Sheesh you his have a lot of stories with this subject. Makes me sad and upset to hear. But I do appreciate you sharing✌🏼
I've had my studs and lug nuts cross threaded before, but I've never seen anything like this....amazing, and obviously not in a good way. I once had a shop that left my oil drain plug loose and it was leaking bad. Took it back to get them to fix it and they acted like it was my fault. It's unbelievable what people do to others and think they can get away with it. Good job getting this fixed! I'd try to get some kind of restitution from that shop if i were them. Thanks for sharing!
Sheesh man the oil plug story was crazy too! I’ll follow up with you guys if progress is made with a shop who did this. Unbelievable indeed David. Most welcome. ✌🏼
This is why I never let anyone touch my car. Especially those shady ass mechanic.
10-4 on that boss👌🏼
My shop would instantly terminate a goober for doing such butchery. We do great work with integrity and we work by appointment only . We ain’t cheap and we turn people away almost everyday. Good shops still exist but they are few and far between.
@@prevost8686 They’re are indeed many good shops still out there! Glad to hear tires one of them! This industry will always be plagued by these issues. But build yourself up a good reputation and and you should always have a steady stream of customers👍🏼
This shop should be held accountable.
I will follow up with my friend with the situation. Hopefully I can report back someday day when / if I hear something. Completely agree!
I used to stack up a bunch of washers and then impact a lug nut on and it would pull the new stud right on through....both ways get the the job done!
That works too! Thanks for top tip!
I absolutely love your videos and your handwork is truly admirable. I was wondering, do you sell any of these or are planning to in the future?
Bless! Thanks. Most vehicles on this channel is owned family and friends and won’t be for sale. The ones that will be for sale I’ll let you guys know. Thanks for stopping by and seeing my dumpster fire content 🤣🫠
That old tube had a TR150 valve stem which was hand bendable, I like the old tubes more because they were heavier and are good to keep for things like swimming or snow tubing.
Was this stovalls in tennessees wrecker before?
I checked Stovall’s paint job and no I don’t think so. I was able to find to company who had lil tugger with his current paint job and that tow company is still in business in California. (Dumb luck I found an original business card inside the cab) 😉
What is that flap called in the back
24:40
Where did you find the tires?
Amazon
That is with gobbes of diesel in so yah. And starting your tractor about the last thing ya'll do if it isn't leaking IS REMOVE IT AND THE RADIATOR. The only thermostat in the world without a bolt on top. And what in heavens name are you doing to the bushes?
Thank you CASE haha!🤣
We had the 71 Newport blue with black vinyl black int, great car, it had bucket seats, which was odd for a car that big.
Ohh that is a odd option. Thanks for sharing!
Thanks. I enjoyed the video. 👍. I have a 1991 Olds 98.
Fantastic💪🏼
I love 2OR, 22R, and 22RE, this vid is fantastic. New sub. Thanks for sharing
Most welcome! 👏🏼✌🏼
shitting because gets like 2 mpg
You don’t buy these cars for fuel economy lol
This looks similar to a 1990s Lincoln town car, especially the trunk areas and door panels! Did Lincoln and Oldsmobile share parts back then?!
I highly doubt Ford was sharing parts with General Motors but some days you do wonder😏
When GM tried to revived the big car 91 to 96 with the Olds 98, Chevy Caprice, Buick Roadmaster and even the Bonneville I think the Olds was the nicest
Another enjoyable video and great fit with the Husky. Keep it up and stay silly. 🤪🤠👍
Absolutely sir!💪🏼
Thanks for doing this video man, you were very good at all aspects to me. You should continue doing this.. love it!!!
Ahh thank you much. Bless✌🏼
Hey where did you order the manual choke conversion parts from? Such as the bracket and screws I’m having the same issues with choke going limp causing the vehicle to high idle randomly. and would rather have the manual back! Thank you if you see this! And thank you for your video either way my friend!
Oh man it took me a minute to find it the first time. Here is the link: allcarbs.com/product/edelbrock-manual-choke-kit/ Don’t know why it’s not more commonly available. But it’s there!
@@SwedeMachinethank you so much 🎉 you’ve made this Norwegians day!
@@DaySunSkar Most Welcome!
I have never laughed so hard, man enjoying life and making it enjoyable to watch. Great up grade to the truck.
door no close because the lip is bent out. Use hammer mash lip flat agassint new tool kit
Actually the latch lock was protruding a little too much and hitting the toolbox. A quick dremel operation and I got it sorted. Thanks for watching!
😁😁👍👍
Remember when they were getting rid of the split rim in the late 70s or the 80s?
Beautiful car. But, I would need A/C and cruise control.
10-4 on that
Glad the propane tanks weren't there.....Oooo! 😬🔥 With those fancy casters, im suprised they didnt put fake white letters on the wheels. 😅😅 The toolbox looks great!! 👍👍
I would give it a half point if it did have white letters on the wheels lol. Thanks David appreciate it🙂
👍
"looks like they should fit" - what I thought of chinese engine mounts that I bought for my Mercury. Only a drill, angle grinder and different bolts were required to make them fit.
Oof. Yeah anything coming Asia will always have me doubting it’s “plug and play” so to speak. 🙃