Видео

Hi :). There are two seger rings and they have different thicknes. Do you remember which side the thicker one goes? I would be reealy happy if you could help :). Thank you :)

Hello. What parts did you put? OE or Aftermarket.

THANKS,,, YOUR VIDS R BRILLLL ,STRAIT TO TO THE POINT ETC

My f20 issues when shock cover bump stop slipped down then have some squeaky noise. Shock cover bump stop didn’t crack but I can fix back for temporary only by push by hand.

Rainbows 🌈 in the video on your sweet catio build! 🐈😸 🐈‍⬛ 🌈👑😻 What a Dream, so Wonderful!!!🎉🎉🎉❤❤❤🎉🎉🎉

Thank you for this video I stumbled across it when I was just about to order a ecu kit and checked the earth strap and it sorted it

I keep getting low oil pressure warning after a rebuild including chain, camshafts, con rods bearings erc. Everything is checked, no sludge or blocked lines. Oil switch sensor, oil pressure selenoid replaced. Vanos cleaned. Oil pressure comes on after 15-20 min drive when coming to a stop the red light oil comes on. goes away after an engine restart. Are there any oil pressure adaptations needs to be done? Thank you in advance

You replaced for the new module, replaced sensors or just replace wiring?

Title in English every thing else in Deutsche 👎🏽👎🏽

Mine have failed at 90k miles.. I have new ones in the post 👍🏻

What a legend. Nice video 👌🏽 thanks for putting in the effort to do this, it’s a great help for the older-bike owners community

What is the sort of pump you use to connect to the bleeding nipples?

Wow Bro! thank you for this video. I think this is the same for my Genesis Coupe. I'm going to try it. Thank you for your help.

The dog be like : them humans building me a house :D :D the cat :

I need help setting timing without having the tools

Love this catio. Great job to you both. ❤

A catio with a terrible view. Poor kiities.

That music.😢😢

Hoping those lights aren't LED. LOVE. PEACE. God Bless

When you stapled the wire to the wood, did you stapled every square?

Happy cats, happy wife, that’s why I’m building a catio. My husband is SO LUCKY I’m doing this! 🙃

thanks sir n madam that was easy to understand

WHAT IS THE CALL OF THE DIAGNOSIS YOU USE? WHERE CAN YOU BUY IT? THANK YOU

Cover for the Catio ? Protect the kitties from the weather ! Awesome job 👍

Hello, I have an n53 engine, I installed noxem 129, on bimmerprof he explains that you have to adapt the nox sensor, you did the whole engine, I don't understand, I am French, I maybe I was misunderstood?

Shut uppppppppppp and get to the point. Damn. Hate this time wasting nonsense

Just a quick comment on the Top Dead Center locking tool. 100% unnecessary to buy or make your own tool. An 8mm allen hex wrench works perfectly. Fits like it was mean to be the original tool.

Hi, I have a BMW 116i and it has a coolant leak on one of the pipe connector seals connecting to the block, would like to know how do I go about removing the silver pipe and replace the seals

Hello can you give me the reference of your new chain tensioner please. thank you very much for your videos it is very useful to me for my f21 n13.

Beautiful, lucky cats. Doggie wants in too.

Thank you very much

why did you feel the need for the annoying "music"?

After changing the Nox probe, will it be immediately visible in the system, for example Inpa or Insta? I changed it myself and after the change I immediately get error 2 aed which says that the version is incorrect Could it be that the probe is damaged or do I just need to decode the old one and code the new one? Help

what version of inpa are you using

Hello I recently bought an e87 n43 engine and I have a 2AED error and the ista shows that the nox probe is the wrong version is hest coding needed?

Dziekuje ;)

So well built! And on grass! You see so many of these built on concrete.

How many kilometres has a n13 engine life?

My 2016 116D started giving sharp squeak sounds whenever I turn right. Earlier this morning, the squeak noises ramped up to whenever I drive. In the cabin i can more or less tell it's coming from the left rear. The rubber covers also have broken off. What exactly do i need replacing?

Misfire at idle?

Hello, same issue and same idea to solve it. I had an oil consumption of 1 liter/1000 km, and after a long-term in neutral and start, a relatively big cloud came out of my exhaust system. Now the valve stem seals are done, the line after my exhaust is getting less and no carbon black is getting in the cold phase out. Oil consumption got normal again. Perfect video! The bad thing is, my left camshaft (EU, German model, 2013) has a triangle fitting at the back. I wasn't able to get it out like you. I had to uninstall it with all bearing shells/assemblies for the camshaft. Ista told me the same as yours, but somehow my camshaft had a triangle at the back and you have a flute fitting, which is a lot better.

From North- Italy ....tanx .... great work !!!!!!

Please help, i did my timing replacement for the same engine but then i get rattling sound while accelerating at 1000 - 3000 RPM

BORING.Twelve months and there is still no colour, nothing for them to play with or plants or anything stimulating at all.😢💔😿

What's a good method to test the bearings to see if they need replacement? I've got 120k miles on my bike, no idea if the bearings are original, but I don't notice any play or any strange noises.

Congratulations, video that explains very well what to do. A question, I have a 2005 R1150R with ABS, which often turns on the ABS light, I would like to try resetting the ABS control unit, could you tell me if it can be done and how to do it? Thank you very much

Hi there！I got a 118i,same N13.Idle shake,if turn on the AC,the shake more annoying.what do I need to do？(forgive my english,I'm from china)

Great series and great videos man! Thabk you so so much!

nice technique. gives me confidence to try.

My 116i is overheating it says coolant level low and drivetrain full performance not available I tried changing the waterpump is it likely it’s the thermostat?