Full clean noisy AIRCON indoor unit ✅ AIR CONDITIONER / AIR HEAT PUMP / AIR SOURCE HEAT PUMP

Full clean noisy indoor AIRCON / AIR CONDITIONER / AIR HEAT PUMP / AIR SOURCE HEAT PUMP - At home VLOG
#Aircon #NoisyAirConditioner #LoudAircon #IndoorMotorReplacement #AirconFullCleaning #AirconFanMotorBearings
How to clean dirt and dust inside aircon?
How to reduce aircon electricity bill usage?
How to reduce aircon electricity consumption?
How to clean and silence the running sound of the aircon?
How to perform a complete cleaning for the indoor unit of the aircon?
How to clean heat exchanger?
How often should the indoor unit of an aircon be cleaned?
How to make the air heat pump indoor unit quiet?
How do I remove the indoor unit fan motor?
Does the indoor unit motor need to be replaced?
How do I replace the indoor unit fan motor bearings?
00:14 - Loud aircon indoor unit
01:06 - Disassemble the indoor unit of the aircon for maintenance
08:43 - Aircon indoor unit fan motor bearings replacement
13:55 - Wash the inside and outside parts of the aircon indoor unit
15:15 - All parts of the aircon indoor unit back in place
17:29 - How much did the noise of the aircon indoor unit be attenuated by full cleaning and replacing the fan motor bearings?
The indoor unit of the aircon has been making an annoying noisy whistling sound for a long time.
An aircon was installed in 2016 in our home.
Now is the time to do a complete cleaning of the indoor unit as well as the replacement of the fan motor bearings.
A new fan cost 202€
Normally full cleaning work costs about 300€
fan motor replacement work as extra work costs 70€ extra
The total price would have been around 500 to 600€
You can handle this all for 10€!!
By replacing the bearings of the fan motor yourself
By doing a complete cleaning of the indoor unit yourself!
Personally, I have never done this before. But the result looks good!
Find out by watching this video!
If you liked this video, press the LIKE BUTTON, SUBSCRIBE channel, leave COMMENTS and SHARE content!
By doing so, you will be able to support this RUclips-channel!
Thank you! I appreciate it! 👍
Have you already watched my previous videos of the subject?
If not, check out the videos where we are building our own CAT PATIO and also second video for LIVING IN CATIO!
See whole SERIES form here:
• How to BUILD & DECORAT...
Jani Voutilainen
You can follow me also in:
INSTAGRAM: / voutilainenjani
FACEBOOK: / jani.voutilainen
RUclips: / janivoutilainen
DIY for aircon
noisy / loud / clamorous / vociferous
Air source heat pump
Air heat pump
Air conditioner
Air conditioning system
Indoor unit
Indoor unit full cleaning
Cleaning the air conditioner
Clean Full HD filters
air deflectors
Air guides
wind deflectors
Wi-Fi module connector
air heat pump housing
room temperature sensor
condensate container
condensate tank
fan impeller
loud fan motor
replace the new bearings for the fan motor
fan motor replacement
ilmalämpöpumppu
ilmastointilaite
ilmastointi
ilmanvaihto
tuuletin
tuulenohjaimet
kondenssivesisäiliö
lauhdevesisäiliö
lämmönvaihdin
tuulettimen juoksupyörä
puhaltimen siipipyörä
kovaääninen tuulettimen moottori
ilmastointilaitteen puhdistaminen
puhallinmoottorin laakereiden vaihto
vaihda uudet laakerit puhallinmoottoriin
Samsung Smart 9
AR09FSFKBWT
AR12FSFKBWT
608Z
--
Thanks for Music:
Sports And Car Energetic Trap | GREVE by Alex-Productions | / @alexproductionsnocopy...
Music promoted by www.free-stock...
Creative Commons Attribution 3.0 Unported License
creativecommon...
and
Ambient Beat | DUNE by Alex-Productions | / @alexproductionsnocopy...
Music promoted by www.free-stock...
Creative Commons Attribution 3.0 Unported License
creativecommon...

[@millet-lp8cg]

Very good job on showing all the steps you need to take it apart and fix the problem.

[@fatherofwildings]

Well done! I did this on one of my heat pumps about 3 years ago - the end result is so satisfying! Unfortunately I have just had to do it again due to the bearing noise returning. Apparently metal bearings in this type of application have a tendency to wear quite quickly due to the corrosive effects of stray electrical currents. I have used ceramic bearings this time which I'm hoping will last much better.

[@JaniVoutilainen]

Thank you! 😊
I can say that the difference is really GREAT after replacing the bearings and cleaning the device.
In the future, it will be easier to change the bearings and clean the device when you know how to do it.

[@300zxdriver]

How did you know what bearings to get? Where did you get the bearings?

[@jiemiraten]

Thanks so much for sharing this video! It has saved me a very expensive repair by professional technician.
Though, I do not have the confidence and tools for soldering and replacing the bearing, so I have opted for replacing the fan motor. Around 200 euros in spare parts instead of 10, but I will anyway save the cleaning service which normally costs 200 euro as well...

[@JaniVoutilainen]

Great that the video was helpful! 👍

[@jiemiraten]

@@JaniVoutilainen Job just completed with great result thanks!

[@jiemiraten]

And if the new motor makes issue, I will replace the bearings on the old one with proper ceramic ones :)

[@Reddylion]

Nice

[@garza7676]

Good video . Unfortunately I just decided to buy a whole new motor .

[@StianGjesdal]

Hello is it possible to get the size of the bearings needed?

[@SmGriefer]

608zz

[@3beltwesty]

Skateboard ball bearings

[@EIRK2046Y]

Good job !!!