Ep. 35. Rear Bumper 1st Gen Sequoia - Brute Force Fab Rear Bumper Install and Walk Around
HTML-код
- Опубликовано: 25 авг 2024
- 1stGenOffRoad.com Shows You How To Install A New Brute Force Fab Rear Bumper On a 2004 Toyota Sequoia.
Billy's Tundra Suspension: www.1stgenoffr...
Anything else for your Toyota/Lexus: www.1stgenoffr...
Previous Upgrades:
1. Suspension: www.1stgenoffr...
2. Firestone Helper Airbags: www.1stgenoffr...
3. Fuel Wheels: www.1stgenoffr...
Amazon Links
1. Self Etching Primer: amzn.to/2LHlMWh
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Limitation of Liability & Disclaimer
Under no circumstances shall “Josh” of “1stgenoffroad.com” be liable for any losses or damages whatsoever, whether in contract, tort or otherwise, from the use of, or reliance on, the information, or from the use of the internet generally. For purposes of this section, Josh and 1stgenoffroad.com or those associated, its divisions, subsidiaries, successors, parent companies, and their employees, partners, principals, agents and representatives, and any third-party providers or sources of information or data will not be held liable for any wrong doing the user does to his or her own property guided by these instructions which are meant to be a guide or a “how to” on fixing your own vehicle.
Josh and/or 1stgenoffroad.commakes no warranty, representation or guarantee as to the content, sequence, accuracy, timeliness or completeness of the information or that the information may be relied upon for any reason. Josh and/or 1stgenoffroad.com makes no warranty, representation or guaranty that the information will be uninterrupted or error free or that any defects can be corrected.
SICC dude!! You and Billy do a lot for the first Gen Community. Thank you for that!
Hell yeah another 1st gen sequoia video
That's an impressive piece of engineering for sure! Great video as always my friend
No doubt. Billy's stuff is on point!
Right on Josh! I got the front and rear bumper and the rock sliders. When to his shop and he installed the rear bumper and rock sliders. Took him less then 4 hours. It was your channel that let me know about him.
You’re the man Josh! You’re the reason I got brute force fab in the first place what seems like so long ago. Now full circle watching you install another one is great 😁
Quite a complement. You and your truck are LEGEND!!!
Awesome upgrade Josh!!!
Thanks brother! 👊
Your Install Video helps thanks, got the same bumper.
I put that bumper on my 05 a few years ago. Wish I had done the dual swing outs vs the single like you did. If only because it's easier in town when loading/unloading but also at camp. It's kind of a pita to keep working around it. Did the same thing. straight to the powder coat shop. My powder coat failed after less than a year. Got it sandblasted off and just painted the crap out of it. Been great since. I see you already have some rust spots in your PC. Hope that doesn't end up like mine did.
Also. Josh is a great resource for 1st gen stuff. I'm still riding on suspension from his shop and we've beaten that stuff up.
@1stgenoffroad how did you sideways mount the jerry can holder? Might have to steal that idea.
Thanks brother. Yeah, I have some surface rust from some areas that didn't get coated. No bubbling yet. It's been on for about 9 months now, but I'm just now sitting down to finish the video. The jerry can holders mounted right up using the side of the holder.
Such a nice rig. Awesome work. Thanks for all you do.
Thanks brother!
I think your side table is upside down but maybe you want it that way. Looks good! I love my bff on my tundra🤙
Could be. I positioned it so things would be less likely to roll off.
@@1stgenoffroad I thought the side panels were a great added feature. Now, we know we can have it both ways, that's handy!
Im going to buy a set of those fuel wheels for my 4runner.
I love these wheels.
Looks awesome! What kind of roof rack is that?
Thanks. It's a Rhino rack for a 100 series land cruiser. I made if fit (almost perfect) with some 4Runner and land cruiser mounting brackets. Here's the video for that: ruclips.net/video/CIR5uRIa6so/видео.html
That thing looks sick. What are good headlight replacements. Not just bulb, the entire bodies. The cheap Amazon ones don’t adjust angle and scratch up bad.
Thanks. You know, I'm not sure. I've tried a set from Amazon and they didn't work well. I think I'm just going back with OE.
@@1stgenoffroad well, you are the man to find something if it exists. Still loving my 3” DOB/OME!!
NICEEEE!!!!!!
Thanks brother!!
Are you not selling these bumpers anymore? You are showing out of stock. Last i checked.
Love the content.
Don't have them on the website. Check with Billy at bruteforcefab.com
My only complaint is no instructions for as much as the bumper cost. Issac Spoon's video saved my ass.
Isaac made a great video.
Great truck😀
Thanks brother!
How does the trailer hitch attach now? Looks good.
Have not tried it yet; TBH.
@1stgenoffroad ok. Thank you. Let me know when you at least put the hitch in and it attaches.
Are there plans to sell these on you site?
Intresting to see that you are still rolling w/ your third row seats. BTW...how did that rusty a%$ hitch tow anything? LOL! Cheers from Katy.
Yeah, the 3rd row is the best part. And yeah, it looks like a lot of rust, but the metal is solid.
FYI. Looks like you have a crack in your hitch tube. 2:23 in the video. Unless its a piece of string or something.
NM, guess it doesnt matter because you replaced it anyway
@@BrandonGlenn8867 Yeah... It was stored away safely in the dumpster.
Josh- Can you give a link for this bumper and also your sliders? Thanks - David
'talk to Billy at bruteforcefab.com.
Looks great ! I’ll try to remember to give you a hammer next time I see you.
Haha! Thanks brother. The best tool is the one in your hand LOL.
Hey, when are we gonna put you in a video?
@@1stgenoffroad You say the word. I got a son that would love to show off his 1st gen Tundra as well.
How are the OME2862 holding up with the extra weight? Did you have to use your bags? Are you considering a different springs with the added weight?
I've always run the 2862 springs,. I do have airbags as deflated as I can get them. I was fully anticipating having to swap out to a heavier spring. But with the deflated airbags, it really hasn't squatted much. I'm happy with the springs and plan to leave them.
@@1stgenoffroad Great that good to hear. I’m doing a lil homework for the rear spring with added weight. I would hate to make the wrong choice and buy twice. I’m leaning toward the 2862.
Why did you quit carrying Brute Force bumpers for the Tundra on your site?????
long story. you can find one at bruteforcefab.com
Already did, bought front and rear, plus sliders for my 05 Tundra DC, some of the best quality in industry, everything went on perfectly, nothing fought me and reasonably priced compared to a lot of “gougers” in the Toyota community!
@@phxamigo 100%
I’ll get you a hammer for Christmas!
Guess I need one.
Geez these are like 2 grand, half the price of the Sequoia
Stick to play station.
The snorkel is dumb, there's no way you're going into 4 foot water crossing
Dude. Its not only for water crossing, you dip.
@@1stgenoffroad Yes it is, that's what it was designed for. Now you're even dumber if you put it on and don't know what it's for.
Clean cooler air?
@@1stgenoffroad Wow you're gullible. Let me guess you read that somewhere that says they provide "more HP" and "better fuel mileage" too. ROFL That's called MARKETING, they want to sell it to more dopes who think it's helping their rig. Ever hear of an air cleaner? It's job is to CLEAN the air. How about a mass air flow sensor? It's job is to change the fuel mixture based on the temp of the air. Apparently my job is to school an idiot on YT. I mean it's literally in the NAME "SNORKEL" It's job is to provide air to something or someone UNDER WATER!! ROFL!!!!!!!!!!!!