Hi Luke, im back again! :D I just wanted to take a moment to congratulate you on your fantastic channel! Your content on RUclips is truly amazing, and I want to express my gratitude for the valuable information and entertainment you provide. Keep up the great work, and thank you for sharing your expertise with the world. Best regards, xorge
I also would be very interested in buying completed rigs. For Verus I would go for 100 phones in total. If you don’t want to mine with all of your 1000 phones here we go 😊 And thanks for the brilliant guide!
@@LukeWrightMain i have different phones, like s10 , s10+, redmi and so one that i use for mining, but no screen on them. My question is, how can i have these screenless phone run without battery installed ( but with ur setup from you videos ) , but actually connect them to main pc ( i use adb control app on my pc ) but i connect them via cable , one by one when they crash or battery is getting depleted). Is there a way to use these screenless phones with no battery but still using to connect via usb to my main pc?
@@riogsm yes you can use this guide to help you, it would work the same and you would just have to enter a few commands via adb, the cellhasher box actually comes with cables made for the S10 But use the same adb commands and it should help with the battery, I don’t know what yours crash tho
Finally it happened. Yesterday all evening on samsung S6 i had 9Mh/s. Damn.😊 Also, with standard charger while tablet charges it takes 10W per hour measured. Not even 60W as described in the videos.
I'm trying to follow this while setting up my Orbics, but it's kinda all over the place. It seems to have all the steps, but they're not in order and there are a lot of tangents that make it difficult to follow. I have to scrub the video looking for particular bits of information, hoping I'm doing them in the right order. Also ran into a stumbling block where the bootloader is locked and I can't unlock it without a specific driver from Verizon, I think. If you were to remake this, I''d recommend a focused step-by-step process to avoid any sort of confusion. Just to get the basic/required/essential steps in a comprehensible format, with anything extra left at the end. Having a few pictures of each step and what each step of the process should look like. It's my first time using adb and I'm muddling through this setup as best I can, but a more refined video would be extremely helpful.
@@LukeWrightMain Yes, please. A guide or manual type video would be helpful for those who purchase a cellhasher box. Like what all the pieces are, where they plug in and such. For instance, you mention the Orbic Joy a lot in this video, but the BMS cables that come with the cellhasher don't seem to fit. A detailed description of what we are purchasing would be pretty much necessary for noobies like myself who want to learn more about what we're working with.
@@PunsRDum will do, yes the ones that come with the cell hasher box are made to be cut at the ends and you solder the ones from the orbics that they have.
@@LukeWrightMainThanks for taking my feedback so well. I'm excited to use this product, just want to be sure I'm doing everything correctly. Excited to see the new video soon!
great work luke . i already got 2pcs of those motherboards and also fund the battery cables im trying to use the s10 plus phones . thanks for the update keep it up 👍 🙏 .
Need to keep this phones cool, or no good. The best way is to create a big block of marble, granite or self made concrete and place phones on top. Than take little bit of olive oil and put it onthere to make smartphone stick better. Or wrap in food plastic and keep it in cold water. 😅 Add some water resistant shoe spray, to keep phones in the water longer.😊
I set cpu priority to 5, and my tablet became super hot, then I placed it on a marble block and in a few minutes my tablet become coolant temp. And increases the mining income.
What is the script or more specifically the command line that automatically restarts the mining service if the cell phone crashes or stops mining? Thanks!
Verus jumped up, now its hard to mine. I found another coin. Scala XLA, it's like Monero. Did you ever wanted to mine Monero. Here is your chance. Scala just jumped up. Hurry up. Soon might reach a $1. Now $0.00004. Was $0.00002. Very low cap. Legit.
Great video. Question. The reason why you had to cut and solder the BMS cables was because the power supplied is creating an overvoltage right? But that's specific with the Orbic Joys right? If I use a different phone that uses more power, I won't need to do this right?
@@davidfu8174 correct, I have been told the Samsungs devices take a higher voltage which you wouldn’t need to cut anything. The PSU in the box goes down to only around 4.45-4.5. Which isn’t low enough for my orbics to use the BMS cable with the circuit, (you want to use the circuit if possible) so by cutting the circuit off I bypass over voltage out shut downs. There is modification that I’ll share in an upcoming video to the PSU that brings them all the way down to the required voltage now aswell :)
Thanks for the forecast! 📊 Need some advice: 🙏 I have these words 🤨. (behave today finger ski upon boy assault summer exhaust beauty stereo over). I don't know what they are. What should I do with them? 🤷♀️
@@Mr.Unbreakable83 I have considered it. Although it’s quite a bit of labor out of my busy day. I’d always recommend trying yourself as it will be easier to troubleshoot if that time comes.
@@Warlockphreak you need to, either ramp up your PSU output, or configure your phone with fastboot oem off-mode-charge 0 I have S7s and with these it works great.
I might use the box. I been thinking could we use a capacitor or even a lifepo4 battery like the headway and just use the bms from the old battery. ? I phone farm. Not mine. A little. Cpu mining here and there. If I don't make 15 to 20 cents per day per phone I dont even turn it on.
@LukeWrightMain Seems like it would be a great battery replacement since they are 6 bucks 8ah and 3.2 volts . And 4000 charge cycles to 80% Cryptosense is a good mining alternative I usually make 30 cents per device on my good days. Nielsen mobile panel is good for older cheaper phones. 16.6 cents per day fully passive u can run more than one. 60 bucks a year . One measure perks 16 cents per day per phone. One account per ip. Mob profit Brand bee both 5 cents per device Cashing out turns into a job if you are cashing out on 400 phones.
@@stacy532 totally agree on the chore for using apps like those when cashing out, I do think a little scrypt could be made to speed up that process. The majority of the work on my phones is all scripted now and makes it very nice be hands off
@LukeWrightMain Yep. On crypto sense it's basically unlimited devices and u can cashout to same. Coin base but once u hit over 50 phones that turns into a second job lol
Hi Luke... I know you are using Orbic Joys for phones. My only question is since it makes you put a sim card to even get to Wi-Fi to use... is one able to purchase a Byod Verizon sim from Walmart and just put that in to get to Wi-Fi or do I actually need a working sim as I do not have Verizon. I look forward to your help. Thanks!!
great videos thanks i have been trying to set battery life to 100% it does change but when i restart the phone it goes back to normal any ideas of where to start?
Yes it’s only a temporary set, so every time the phone restarts you’ll need to type that. That’s why I have scripts that will do it for me when the phone restarts
What would be the correct setup ( in the nano config.json file ) , to be able to monitor each of my miner to a verusbox local server? I tried finding some video, but couldn’t find exactly how to do it. Can someone provide more info? ( what is the line i need to add in the nano config.json file )
You seem to be the (crypto) expert on the orbic joy. Picked up one the other day for testing but it's a Verizon prepaid model, and the Google setup wizard is requiring a SIM. Tried various things but can't get around it. Any way you know of or is this firmware really locked down? Thanks in advance
@@harmonjosephd You have to solder the cords provided. Some people have been able to modify it for usb use, but the power will drain overtime on that. As the units are meant only for data transfer through the usb and power separately
@@LukeWrightMainI might have to root my devices to disable the battery. I’ve got an Samsung A42 that won’t allow that command to run. My devices are all Samsung but range from A03s to S21 plus. I repair electronics and had several laying around that I forgot about.
@@harmonjosephd which command? The fastboot one? On some devices it doesn’t work, so just make sure that you can power on the device manually if you want to skip it.
I recently bought two (used) Orbic Joy phones, one seems to work fine, but the other is stuck on the initial screen- asking for a SIM to be inserted. How do I get beyond that screen, to allow installing apps on the phone?
Was changing one of my phones battery and taking the cameras off. Came back and the screws were all over the place😞 which of the 3 cat's was it. Missing screws now I'm going to have to use kapton tape
All of them are so different, obviously the newest Samsungs are great but they cost a lot. The best cost for performance I have found is orbic joys but those are hard to get
Can I still add sim cards to the phone? For example 10 phones then 10 sim cards I just want to have 10 different ip addresses I'm not into phone farming but it's way profitable than that
@@muzikhoz3433 I mean in theory yes. As long as you use phones that are unlocked sure. 👍 Can also configure proxies to manage multiple ip address without SIM cards. You are referring to your public ip (10 different ones) correct? Not 10 internal local IPs.
@@LukeWrightMain Tried that and didn't work. Battery charge still pops up and stays off. Only way i see i can get it power up automatically is with its built in power on, power off scheduler. Like a certain time a day to power on by itself
@@jecht317 gotcha, yeah that’s unfortunate. Certain phones have certain root locks. If there’s ever a root or a way to load custom rom onto the device then that could be an alternative
I made my samsung tablet S7 lite mine at 9MH. You have to make an app for tablets that overclocks the cpu and keeps all programs and scripts always closed.
@@seasonbeats6221 Well thank you for looking at my videos! Good luck with your journey! It’s a fun and unique one being here with the phones! Best advice is to try to get phones for cheaper than $30 always closer to $20 or less the better!
@@kackbraten5390 since you don’t need the cell service you can use it. There should be methods out there to bypass. I happened to have some that I bypassed aswell.
@LukeWrightMain No idea, I just start few days ago. I have samsung S6 light. And it mines with speeds from 3Mh/s to 7Mh/s, verus coin. I download from internet octa cpu booster, run that, it did something to android. Yesterday evening average mining speed of S6 went up to 9Mh/s and in the early morning too. And that program said speed up only up to 39%. There is option to speed up to 80%, but it's payable, and this program is banned by Google play store, used to be there. I think this S6 can pool more Mh. No idea which tablet is the best, there are cheap chineese with very fast cpu's, some people complain not working unit, but looking at those tablets that has very fast cpus and big ROM. 4", 8" or 10" is good. But you mentioned in the video that you can remove screen activity. I guess I need to hire or find a programmer to boost the tablets.
@LukeWrightMain also I noticed that very often mining speed reduced because luck of space. After cleaning the android with a tool, speed comes back up. I think need to create a custom software that will make your tablet fly to the moon when mining.
@LukeWrightMain So, if you build a crazy software for tablet mining, you can charge people 5$ a month to use it or whatever. And you might get lot of people using it. Cause there are lot of people who mine this and has no clue about coding. I also used UserLand, ubutu setup to mine verus. Not the original verus app.
@LukeWrightMain Also I installed quad cpu booster on LG phone, run it, had mining speeds average 1Mh/s up to 1.7Mh/s. now it's 1.2Mh/s up to 2.5Mh/s. What the hell is going on..... this morning went up to 3Mh/s. This is statistics from a pool data.
@@LukeWrightMain so when I use scrcpy I write the adb scripts in the window that’s open and can visually see the phone screen on another window at the same time
@@antonioescobedo6930 you would use two separate cmds one to run the script and the other can be to view the phone with scrcpy. So yes you could have it open while you run a script
you can run the script that i provided yes. you will have to change your parameters for file path etc to your location of adb on your computer.@@Vlad19th
Of course. I have 80 hours a week outside of this. And I don’t want to post content that actually isn’t worth it. Sometimes that’s every month. Sometimes not. I also have built ordinals petocols on BTC and ltc in the last year. Along with a Core developer so I need to make sure my duties to those networks are there aswell :) thanks for the advice!
Hi Luke, im back again! :D
I just wanted to take a moment to congratulate you on your fantastic channel! Your content on RUclips is truly amazing, and I want to express my gratitude for the valuable information and entertainment you provide. Keep up the great work, and thank you for sharing your expertise with the world.
Best regards,
xorge
This means a lot! Thank you for the kind message!
Always appreciate feedback on how I can improve lmk. Thanks!
I also would be very interested in buying completed rigs. For Verus I would go for 100 phones in total. If you don’t want to mine with all of your 1000 phones here we go 😊 And thanks for the brilliant guide!
Noted! If you are in the US I might be able to. But there’s laws on selling phones that makes it hard to ship more or less because of batteries
@@LukeWrightMainI am also interested! In US!
@LukeWrightMain I'm interested in a complete box. In NC
@@LukeWrightMain remove the batteries - and then sell the phones without batteries !
This is so cool! I can't wait to get mine :)
Excited for you to try it out!!!
This is a crazy setup. Good job.
Thank you very much! Worked hard on this!
@@LukeWrightMain i have different phones, like s10 , s10+, redmi and so one that i use for mining, but no screen on them. My question is, how can i have these screenless phone run without battery installed ( but with ur setup from you videos ) , but actually connect them to main pc ( i use adb control app on my pc ) but i connect them via cable , one by one when they crash or battery is getting depleted). Is there a way to use these screenless phones with no battery but still using to connect via usb to my main pc?
@@riogsm yes you can use this guide to help you, it would work the same and you would just have to enter a few commands via adb, the cellhasher box actually comes with cables made for the S10
But use the same adb commands and it should help with the battery, I don’t know what yours crash tho
Really love your videos man keep it up
Really thankful for the comment! If you have any ideas for me or tips lmk!
Finally it happened. Yesterday all evening on samsung S6 i had 9Mh/s. Damn.😊 Also, with standard charger while tablet charges it takes 10W per hour measured. Not even 60W as described in the videos.
9MH/s ??? Iam getting 3.4 - 3.8Mh/s on my s8 how you did it ??
@@Vladimir-q8h and I searched for marble block cooling didnt find anything
Hopefully you can do a video on how exactly you set up and run your scrips, what program and stuff like that
💯
Boa ideia. Podia fazer o passo a passo.
I'm trying to follow this while setting up my Orbics, but it's kinda all over the place. It seems to have all the steps, but they're not in order and there are a lot of tangents that make it difficult to follow. I have to scrub the video looking for particular bits of information, hoping I'm doing them in the right order. Also ran into a stumbling block where the bootloader is locked and I can't unlock it without a specific driver from Verizon, I think.
If you were to remake this, I''d recommend a focused step-by-step process to avoid any sort of confusion. Just to get the basic/required/essential steps in a comprehensible format, with anything extra left at the end. Having a few pictures of each step and what each step of the process should look like.
It's my first time using adb and I'm muddling through this setup as best I can, but a more refined video would be extremely helpful.
I appreciate this feedback. Would you still be interested in a more step by step guide?
@@LukeWrightMain Yes, please. A guide or manual type video would be helpful for those who purchase a cellhasher box. Like what all the pieces are, where they plug in and such.
For instance, you mention the Orbic Joy a lot in this video, but the BMS cables that come with the cellhasher don't seem to fit. A detailed description of what we are purchasing would be pretty much necessary for noobies like myself who want to learn more about what we're working with.
@@PunsRDum will do, yes the ones that come with the cell hasher box are made to be cut at the ends and you solder the ones from the orbics that they have.
@@PunsRDum but all aside I will make this video a priority sound good? Expect in hopefully in a week or so
@@LukeWrightMainThanks for taking my feedback so well. I'm excited to use this product, just want to be sure I'm doing everything correctly. Excited to see the new video soon!
great work luke .
i already got 2pcs of those motherboards and also fund the battery cables im trying to use the s10 plus phones .
thanks for the update keep it up 👍 🙏 .
Awesome! how's it working for you!!!!? Love these things.
can someone please provide me the link of board
@@ehtishammubashar8523 cellhasher.com
@@LukeWrightMain i just want board
@@ehtishammubashar8523 yeah I don’t know if you can get the board separate, your can attempt to search “OTG phone motherboard” and see if that helps.
Need to keep this phones cool, or no good. The best way is to create a big block of marble, granite or self made concrete and place phones on top. Than take little bit of olive oil and put it onthere to make smartphone stick better. Or wrap in food plastic and keep it in cold water. 😅 Add some water resistant shoe spray, to keep phones in the water longer.😊
I set cpu priority to 5, and my tablet became super hot, then I placed it on a marble block and in a few minutes my tablet become coolant temp. And increases the mining income.
Thank you for showing all this! you are an inspiration for me :))) I am also trying to build such a device for mining verus coin ;)) THANKS MANY
Good luck!!! if you need help let me know!
What is the script or more specifically the command line that automatically restarts the mining service if the cell phone crashes or stops mining? Thanks!
@@abdeldiaz839 that’s going to be the monitoring scripts however I’m about to launch an easy use software for everyone, expect a video soon.
Bro this is tiiiiight.
@@InvrsROBINHOOD thanks!
Note fastboot oem commands like these are only available on some devices not all just friendly reminder
Thanks Darkton! ^ noted
For your monitor script, Do you have to be connected via adb or can you call the miner via ip or somehow with userland remotely.
Verus jumped up, now its hard to mine. I found another coin. Scala XLA, it's like Monero. Did you ever wanted to mine Monero. Here is your chance. Scala just jumped up. Hurry up. Soon might reach a $1. Now $0.00004. Was $0.00002. Very low cap. Legit.
@@Vladimir-q8h you rock! I’ll check it out
Great video. Question. The reason why you had to cut and solder the BMS cables was because the power supplied is creating an overvoltage right? But that's specific with the Orbic Joys right? If I use a different phone that uses more power, I won't need to do this right?
@@davidfu8174 correct, I have been told the Samsungs devices take a higher voltage which you wouldn’t need to cut anything. The PSU in the box goes down to only around 4.45-4.5. Which isn’t low enough for my orbics to use the BMS cable with the circuit, (you want to use the circuit if possible) so by cutting the circuit off I bypass over voltage out shut downs.
There is modification that I’ll share in an upcoming video to the PSU that brings them all the way down to the required voltage now aswell :)
Where can I find those flex connects that go from the phone to the board in the US? i try eBay and nothing?
They are included with the boxes. If you just want the cables lmk I can try to figure somethin out
You’ll need your end for your specific phone but can solder that onto the cable
Thanks for the forecast! 📊 Need some advice: 🙏 I have these words 🤨. (behave today finger ski upon boy assault summer exhaust beauty stereo over). I don't know what they are. What should I do with them? 🤷♀️
Do you have a recommendation for seller of the orb joys that you're using?
Awesome content btw, thanks for sharing
I found the guy on ebay, and reached out. You can also go to old Verizon stores and ask for return phones that you’ll buy
Care to share the eBay seller 😬
for the orbic joys i bought some from a guy named phonedude101 or 404 something like that name.
The best
Hello, can the farming box be sent to Asia, Indonesia or only the USA?
Great video!!! That's crazy you bought 1,000 phones!!! Do you have them all running yet?
I was just wondering, do ya sell separate BMS cables? I'm looking for extra for a project...
@@jecht317 yes we do, we will be updating the website this coming week with many different options for people who are in your position.
@LukeWrightMain Cool, thanks. Because I don't want to experiment with the ones I got without having replacement.
Hey Luke I'm a new subscriber and I was wondering if you built these for people ?
@@Mr.Unbreakable83 I have considered it. Although it’s quite a bit of labor out of my busy day. I’d always recommend trying yourself as it will be easier to troubleshoot if that time comes.
@@LukeWrightMain thanks for responding I appreciate it.
@@Mr.Unbreakable83 of course! Never hurts to ask.
this did not work for me im using S7 PHONES stuck on logo boot
@@Warlockphreak you need to, either ramp up your PSU output, or configure your phone with fastboot oem off-mode-charge 0
I have S7s and with these it works great.
I might use the box. I been thinking could we use a capacitor or even a lifepo4 battery like the headway and just use the bms from the old battery. ?
I phone farm. Not mine. A little. Cpu mining here and there.
If I don't make 15 to 20 cents per day per phone I dont even turn it on.
@@stacy532 you could probably do what your stating, currently everyone uses their phones BMS connector to hardwire connections.
@LukeWrightMain
Seems like it would be a great battery replacement since they are 6 bucks 8ah and 3.2 volts . And 4000 charge cycles to 80%
Cryptosense is a good mining alternative
I usually make 30 cents per device on my good days.
Nielsen mobile panel is good for older cheaper phones.
16.6 cents per day fully passive u can run more than one. 60 bucks a year .
One measure perks 16 cents per day per phone. One account per ip.
Mob profit
Brand bee both 5 cents per device
Cashing out turns into a job if you are cashing out on 400 phones.
@@stacy532 totally agree on the chore for using apps like those when cashing out, I do think a little scrypt could be made to speed up that process. The majority of the work on my phones is all scripted now and makes it very nice be hands off
@LukeWrightMain
Yep. On crypto sense it's basically unlimited devices and u can cashout to same. Coin base but once u hit over 50 phones that turns into a second job lol
@@stacy532 you know it!!! 😂
I'm trying the application, but mining doesn't work.
Which application?
Hi Luke... I know you are using Orbic Joys for phones. My only question is since it makes you put a sim card to even get to Wi-Fi to use... is one able to purchase a Byod Verizon sim from Walmart and just put that in to get to Wi-Fi or do I actually need a working sim as I do not have Verizon. I look forward to your help. Thanks!!
I actual have a way around this, if you reach out in my Twitter I can show you how to bypass that screen
is it safe to remove the BMS what if the power supply got overvoltage, I do say the bms will protect the phone no?
The phone will just glitch as if it can’t control the power, I havnt had problems with it
great videos thanks
i have been trying to set battery life to 100% it does change but when i restart the phone it goes back to normal any ideas of where to start?
Yes it’s only a temporary set, so every time the phone restarts you’ll need to type that.
That’s why I have scripts that will do it for me when the phone restarts
What would be the correct setup ( in the nano config.json file ) , to be able to monitor each of my miner to a verusbox local server? I tried finding some video, but couldn’t find exactly how to do it. Can someone provide more info? ( what is the line i need to add in the nano config.json file )
Hi Luke
can you tell me how you provide internet to all mobiles
I mean which network devices you use
The devices use WiFi.
There is a board I am working on that will be Ethernet but that’s in the coming weeks
@@LukeWrightMain thanks a lot
can you give me the link of board
You seem to be the (crypto) expert on the orbic joy. Picked up one the other day for testing but it's a Verizon prepaid model, and the Google setup wizard is requiring a SIM. Tried various things but can't get around it. Any way you know of or is this firmware really locked down? Thanks in advance
Send me a dm on Twitter I can share videos on how to get past it
Do you have to solder the terminals? Can it get power from the usb port?
@@harmonjosephd You have to solder the cords provided.
Some people have been able to modify it for usb use, but the power will drain overtime on that. As the units are meant only for data transfer through the usb and power separately
@@LukeWrightMainI might have to root my devices to disable the battery. I’ve got an Samsung A42 that won’t allow that command to run. My devices are all Samsung but range from A03s to S21 plus. I repair electronics and had several laying around that I forgot about.
@@harmonjosephd which command? The fastboot one? On some devices it doesn’t work, so just make sure that you can power on the device manually if you want to skip it.
I recently bought two (used) Orbic Joy phones, one seems to work fine, but the other is stuck on the initial screen- asking for a SIM to be inserted. How do I get beyond that screen, to allow installing apps on the phone?
Send me a message on Twitter @ lukewrightmain
I should be able to help
Was changing one of my phones battery and taking the cameras off. Came back and the screws were all over the place😞 which of the 3 cat's was it. Missing screws now I'm going to have to use kapton tape
@@ScollayTable oh no!!!! That sucks man! Hope the tape works out
Just to be clear, you take the battery out because it most times blow up because of mining? Or why you do it?
Over time the batteries can bloat (expand in size) and by removing them it eliminates this potential hazard as yes they could explode.
Great response thanks!
What is the difference if smartphones has a screen and you can install the app to mine this coin or buy this.
Which phone is better for mining?
All of them are so different, obviously the newest Samsungs are great but they cost a lot.
The best cost for performance I have found is orbic joys but those are hard to get
I am having problem on setting up the script on my phone can you Please make a video guide using windows, specially for noob like me.
thank you.
Yeah I have that video on my to do list, I realize that not everyone has the full background on how to get the scripts running.
@@LukeWrightMainwould love this as well
Can I still add sim cards to the phone? For example 10 phones then 10 sim cards I just want to have 10 different ip addresses I'm not into phone farming but it's way profitable than that
@@muzikhoz3433 I mean in theory yes. As long as you use phones that are unlocked sure. 👍
Can also configure proxies to manage multiple ip address without SIM cards.
You are referring to your public ip (10 different ones) correct?
Not 10 internal local IPs.
what brand smartphone do you use? how much does it cost?🤔
I’m using Orbic Joys
can you just sell the built rig.
Would depend on the country you live in. And shipping phones with batteries needs special shipping licenses for business.
hello is this setup is profitable?
I love your videos bro, can you be my mentor as I just love what you do.
Of course man! Ill be setting up a chat room here for people likeminded to join and we can talk and work through this journey!
Mining speed dropped. Can You find another coin like Verus???
Unfortunately, the seller does not ship to Europe. Do you have links or other advice?
I’m still setting up the Europe shipping profiles I’ll see if I can fix that in the next day or two
@@LukeWrightMain Thank you for the quick response. Can you notify me when the link is ready???
Brother, I also want to make such a setup. Please tell me what all things are required for this, if you have a website?
you can message me on twitter, but everything you need is on cellhasher.com, aside from phones, you will need phones.
Please can you provide the code you use to remove unnecessary applications. New subscriber, Greetings from the Dominican Republic
The code is in the “GitHub linked in the description”
It’s in one of those scripts uses adb to get rid of all the apps
Perfect bro, you're the best, thanks you@@LukeWrightMain
I love you bro
Thanks man!
Has anyone used an Android TV STB box for mining?
Have you tried this yet?
What phones do you recommend?
I a03s and orbic joys. Orbic joys are my favorite, but they often come locked
3gb or 4gb ram samsung a03s can mining verus bro?
Yes a03s can, verus doesn’t have a hard load on ram
I wonder if anyone knows the oem off-mode-charge command for CATS48c phones because the command on vid don't work
@@jecht317 you might need to unlock the bootloader (oem bootloader) in the developer settings, then attempt the command
@@LukeWrightMain Tried that and didn't work. Battery charge still pops up and stays off. Only way i see i can get it power up automatically is with its built in power on, power off scheduler. Like a certain time a day to power on by itself
@@jecht317 gotcha, yeah that’s unfortunate. Certain phones have certain root locks.
If there’s ever a root or a way to load custom rom onto the device then that could be an alternative
do you have script for userland autorun for mining?
Yes it’s in GitHub that is linked
I made my samsung tablet S7 lite mine at 9MH. You have to make an app for tablets that overclocks the cpu and keeps all programs and scripts always closed.
Tablet has to be cold at all times, not even warm. Or it won't go to 9MH.
@@Vladimir-q8h great ideas 💡
And you can sell it to miners on internet. For $100 each or something.
Can you show to to use your script my dear?
How many Verus tokens does one box mine per day?
1-1.5 a day (can depend on luck from the pool, as well as temperature of the phones for higher hashrate or lower hash rate)
@@LukeWrightMain I’m just starting my journey but I’m trying to go with the Samsung A03s. I just bought my second one yesterday.
@@seasonbeats6221 Well thank you for looking at my videos! Good luck with your journey! It’s a fun and unique one being here with the phones! Best advice is to try to get phones for cheaper than $30 always closer to $20 or less the better!
Hmm is orbic joy profitable like how much u earn from 1 orbic joy
20 make be about $1.5-$2 a day.
Does this work with the locked down a03s'?
Do you mean FRP locked?
@@LukeWrightMain
sorry i ment locked to a provider, like the tracfone a03s' from amazon,
@@kackbraten5390 since you don’t need the cell service you can use it. There should be methods out there to bypass. I happened to have some that I bypassed aswell.
Thanks sir for explanation. I'm really really waiting for your video of phone farm how much can someone earn cause i really wanna buy phones to mine.
Very soon
Can you build one for tablets?
What kind of tablets are best form your perspective?
@LukeWrightMain No idea, I just start few days ago. I have samsung S6 light. And it mines with speeds from 3Mh/s to 7Mh/s, verus coin. I download from internet octa cpu booster, run that, it did something to android. Yesterday evening average mining speed of S6 went up to 9Mh/s and in the early morning too. And that program said speed up only up to 39%. There is option to speed up to 80%, but it's payable, and this program is banned by Google play store, used to be there. I think this S6 can pool more Mh. No idea which tablet is the best, there are cheap chineese with very fast cpu's, some people complain not working unit, but looking at those tablets that has very fast cpus and big ROM. 4", 8" or 10" is good. But you mentioned in the video that you can remove screen activity. I guess I need to hire or find a programmer to boost the tablets.
@LukeWrightMain also I noticed that very often mining speed reduced because luck of space. After cleaning the android with a tool, speed comes back up. I think need to create a custom software that will make your tablet fly to the moon when mining.
@LukeWrightMain So, if you build a crazy software for tablet mining, you can charge people 5$ a month to use it or whatever. And you might get lot of people using it. Cause there are lot of people who mine this and has no clue about coding. I also used UserLand, ubutu setup to mine verus. Not the original verus app.
@LukeWrightMain Also I installed quad cpu booster on LG phone, run it, had mining speeds average 1Mh/s up to 1.7Mh/s. now it's 1.2Mh/s up to 2.5Mh/s. What the hell is going on..... this morning went up to 3Mh/s. This is statistics from a pool data.
Do you use the Command promt from windows to set up adb commands
Yes
You can also use scrcpy which is like a visual adb
@@LukeWrightMain so when I use scrcpy I write the adb scripts in the window that’s open and can visually see the phone screen on another window at the same time
@@antonioescobedo6930 you would use two separate cmds one to run the script and the other can be to view the phone with scrcpy. So yes you could have it open while you run a script
How much per month can earn money
@@playstation2gamess currently each box that I build with the phones I have makes around $35-40, (really depends on market and what phones you use)
What about 10 core snapdragon 888 Gen 2 with 22Gb RAM smartphone? Almost like desktop.
Sheesh that would crush!
Where do you find a device like that ahah!
@@LukeWrightMain on Chinese market.
@LukeWrightMain If to create good heat sink to keep it cool. Might work.
Which smartphones this box compatible?
Any Android phones, you just have to use your phones BMS cable and know the voltage required for your phone.
i wish i was smart enough to do this
You are, I’m hoping to get a way better step by step up for everyone
its connected to ethernet right?
Not this box no.
I can get boxes like that if so I’ll get them made and I can make a video on it
Is Verus coin mining possible in Korea?
It should be just need a compatible device
Love 💕😊 you
Thank YOU!!!
Samsung made A03S for mining
CRYPTOTAB?
What program do you use to control smartphones from Desktop?
Adb, and then there’s a SCRCPY which is a visual ADB version
@LukeWrightMain after I setup this and connected smartphone I run your app on each phone?
you can run the script that i provided yes. you will have to change your parameters for file path etc to your location of adb on your computer.@@Vlad19th
@LukeWrightMain And if I use smartphone other than you advice, have to change something jn the script?
@@Vlad19th as long as it’s Android it should run fine, make sure you have usb debugging enabled in your device developer settings
Be active or channel will die as seo is also unoptimisation
Of course. I have 80 hours a week outside of this. And I don’t want to post content that actually isn’t worth it. Sometimes that’s every month. Sometimes not.
I also have built ordinals petocols on BTC and ltc in the last year. Along with a Core developer so I need to make sure my duties to those networks are there aswell :) thanks for the advice!
Verus mining speed dropped. I mine less than before. Any one experience the same???
The speed is the same, the profit dropped.
@@Vladimir-q8h you could be on a pool that doesnt get alot of blocks. i am still very profitable.
Is there a way to chat with you via messenger?
P R O M O S M