Nice job sir. Although at first u are hesitant of the mods but your persistent research led you to a good product and eventualy turns into a wise decision after you have seen the results. The price is also reasonable considering its an imported and good quality product. Safe motoring sir!
I have a stock suspension in our WRX but the new Invidia full exhaust rubs on humps. Because of this, I must be familiar with the the road I will take before a trip. The lowering spring’s really good in the City. Nice Ride Mr. Levi.
Worth it yan sir, I'm using H&R lowering springs rin sa vios gen 3 ko and ang smooth pa rin ng ride plus it gives the car a new look since nalowered siya ng onti. Sobrang pogi na ng mazda niyo, ano na kaya ang next budol ng anak niyo sainyo? Haha more power sa channel niyo sir!
Nice drop! Pangarap ko din uli mag lowered, thou sawa nako mangabayo sa pangit na daan ng pinas.😂 di nyo po kinonsider mag coilovers kahit masakit sa bulsa?😅
check lang ung camber and toe alignment ulit. naka set for old ride height ung alignment eh. nanawa nako mag lower lower, air sus nlng hindi ko ntry. coilover recent ko pero mgnda ride.
Did you do some wheel aligment after the springs instalation? If you put 5 people and some bagage it will rub in the back? Im asking because i want also to install this lowering springs on my mazda.
Nong suggestion lang poh base on my experience for I love istalling suspension. If you are still on your stock shocks it’s better to get performance shocks absorbe.your stock one poh. Wont last since they’re a bit longer for your coil springs so you’ll need need a sport shock for it.and they’re shorter best fit and im pretty sure you’ll notice way different went it comes of handling through corners even better compare on coil over. And they’re not that expensive.
Guys I dont know if i should buy these H&R Lowering springs or Eibach Pro Lowering springs for my Mazda 3 Sedan 2017/18 2.5l - the h&r has F-30mm and R-45mm and the eibbach just has 30 all round which would you recommend
Dito ako oorder bukas ng h&r springs. Medyo sceptical kasi hindi ako sure kung legit yung shop. And di sila nagpapa cod. Talagang payment first. Accidentally napanuod ko tong video na to. Naging confident ako sa magiging transaction ko bukas. Hahah salamat sir! Btw ang ganda ng drop ng mazda nyo sir 🔥🔥🔥Kumusta po h&r springs nyo after ilang months of use?
Ok pa rin naman, expect stiffer ride pero hindi naman to the point na sobrang bothersome. Pero pag cornering iba na ang feeling super planted and ang sarap idrive mas confident ka sa corners
Gumanda ang itsura sir levi but for me i’m not ready to pimp my ride by lowering the spring. Mas gusto ko ang stock to enjoy my driving style without inhibition or matatakot na baka sumayad. Kasi for me having to own a certain brand of car/s is already a privilege kaya i’m not after with the good looks anymore.
Nice content sir Levi. I noticed painted din calipers ng mazda3 nyo. Different shop po ata nagpaint nung sa monty nyo? Which shop po marecommend nyo between the 2? I am planning to get mine painted din po. Thank you
Depende kasi on what you need. Yung coilovers kasi you can adjust the height while yung loweing springs ay naka fixed. mas expensive though ang coilovers but it is a better option because of its flexibility
Watched this video couple of times a long time ago. Went back because I just want to ask a question (can’t remember if it was discussed and too lazy to watch the whole thing again). Have you tried bottoming out your stock springs during heavy load? If yes, how does it compare with the lowering springs sir? Mas madali po ba mag bottom out yung stock? Yan kasi issue ko sa stock springs ng mazda 3 ko pag long travel punoan. Sana mapansin po.
@@ridewithlevi6418 wow sobrang laking tulong ng feedback nyo sir. Issue ko kasi pag malayuan byahe namin sobrang kargado mazda3 ko. Mag bottom out sya sa rear minsan. Kaya curious ako sa lowering spring kung pwede parin sya kargahan ng mabigat.
gusto ko ung itsura nung before mtaas pwet tumaas din po ba ground clearance pag ginawang 19 mags or dahil sa gulong din? .. pero naintidihan ko na bakit ni lllowered nag sshine ung mags nung after super pansinin na sa ganda
I want to do the opposite. Gusto ko taasan yung Mazda 3 ko, any tips po sir? usually kase umaakyat kame ng Rizal/Bulacan area and hindi talaga ganon kaganda yung roads don, lage ako sumasayad and na dadamage yung side skirt area ko. Any tips would be appreciated, thanks!
Coilover kit dapat kawawa yung shock absorber & suspension mech mo nyan Sir Lev.. Top of the line at bagong-bago, sayang.. Yung Lowering springs advisable lang yan sa mga low budget na sasakyan.
@@ridewithlevi6418 mas lalong gumanda. rear wing na ata isusunod na i rerequest nyan sir papuntang ganito na --ruclips.net/video/LofS-1I5RGc/видео.html 😀
sir levi, tanong ko lang kamusta maintenance ng paint? about to pick up mazda 3 in pearl white. balita ko soul red and machine grey hirap alagaan kasi manipis yung paint
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Nice fitment 👊 bilib talaga ako sa father-son bonding niyo Sir! Even sa MIAS nakita ko kayo solid 🔥
Salamat sir..its quite relaxing to bond with your son
new subscriber here..ganda ng vlog niyo sir simple and straightforward! keep it up!
not bad for the price and quality
Nice job sir. Although at first u are hesitant of the mods but your persistent research led you to a good product and eventualy turns into a wise decision after you have seen the results. The price is also reasonable considering its an imported and good quality product. Safe motoring sir!
Thanks
nice stance, congrats! although the ocd in me is kicking in when i saw the air impact wrench and the non-star pattern in tightening lug nuts...hahaha
Looks good Sir!
New subscriber here sir. Although im getting a 2nd hand gen 3 M3, not same gen as yours, im binge watching your mazda series.
Thanks for subbing
Nice upgrade looking good not pricey. Value for money.
Namiss ko po Mazda 3 content nyo :) nag start ako manood ng vids nyo dahil sa mazda 3 :))
Thanks for watching
I have a stock suspension in our WRX but the new Invidia full exhaust rubs on humps. Because of this, I must be familiar with the the road I will take before a trip.
The lowering spring’s really good in the City. Nice Ride Mr. Levi.
Yes sir, city drive lang ako always around BGC and Makati
What is your tire size?
215/45/18？
That fitment thooo 💯
Gwapo sir after the drop!
Pogi! Nice video sir. ❤
Grabe sir solid talaga pag nag upgrade ka ng sasakyan! Sobrang pogi lagi 🤘🏽
Salamat sir, simple and clean look lang lagi
Follower since terra days sir!! Hahaha
Sobrang ganda talaga sir
Ganda tlga fitment if binaba then nka mags exhaust naman sunod nyan sir pogi na
Sir ganda po ng fitment 🙌
Perfect!!! Ang ganda!!!
Thanks sir
paps bagay po mazda 3 simple lowering spring.nice one pogi dating
ang laki ng pg kkaiba lalo na pg yn na lowered na
Worth it yan sir, I'm using H&R lowering springs rin sa vios gen 3 ko and ang smooth pa rin ng ride plus it gives the car a new look since nalowered siya ng onti. Sobrang pogi na ng mazda niyo, ano na kaya ang next budol ng anak niyo sainyo? Haha more power sa channel niyo sir!
Sabi nya dapat daw i pant ng white yung lower chin and yung bumper sa
Iikod para body color daw, he he
Very good father
❤️
lupit mo talaga levi
Nice drop! Pangarap ko din uli mag lowered, thou sawa nako mangabayo sa pangit na daan ng pinas.😂 di nyo po kinonsider mag coilovers kahit masakit sa bulsa?😅
Look that fitment lumabas ganda ng m3
Ganito lang mga gusto ko upgrade sa oto, simple pero may dating.
Pwede kaya to sir sa vios gen 3 ko? Vlf11 din mags ko 16x7 et38. Iniisip ko baka may rubbing kapag nilowered. Stock height pa din ako until now.
check lang ung camber and toe alignment ulit. naka set for old ride height ung alignment eh. nanawa nako mag lower lower, air sus nlng hindi ko ntry. coilover recent ko pero mgnda ride.
ang gwapo sir, ganda din ng fitment!
Thanks
Did you do some wheel aligment after the springs instalation? If you put 5 people and some bagage it will rub in the back? Im asking because i want also to install this lowering springs on my mazda.
Yes, nagpa alignment ako after the springs settled, tried with 4 people with bagage no issues.
Sir, please help how about lowering the spring with 5 passengers on a sedan car kaya ba?
Hindi na po ba need camber alignment sa front since bumaba?
looking good. thinking of having my carbon edition done. with this installed 8 months ago, did you see any disadvantages with lowering the profile?
You just have to be careful with potholes and parking ramps
Nong suggestion lang poh base on my experience for I love istalling suspension. If you are still on your stock shocks it’s better to get performance shocks absorbe.your stock one poh. Wont last since they’re a bit longer for your coil springs so you’ll need need a sport shock for it.and they’re shorter best fit and im pretty sure you’ll notice way different went it comes of handling through corners even better compare on coil over. And they’re not that expensive.
Thanks for your inputs
Pogi boss balak ko din mag lowered ng mazda 3 ko. 👌
Sir hindi niyo po nireplace ung bump stop?
Ganda..
Thanks
Guys I dont know if i should buy these H&R Lowering springs or Eibach Pro Lowering springs for my Mazda 3 Sedan 2017/18 2.5l - the h&r has F-30mm and R-45mm and the eibbach just has 30 all round which would you recommend
do you consistently have rear passengers and/or haul heavier items? If so, I would probably go Eibach so you don't scrape.
good day sir im currently on stock 18 inch mags on my mazda 3, do you think it would be good if I lower it to h&r springs?
Yes mas maganda, it will look more astig
I had the same wheel specs but with 224/45 tires, i still rub in deeps. Def you need rear fender roll.
Maybe you need to change tires to 40 series
Dito ako oorder bukas ng h&r springs. Medyo sceptical kasi hindi ako sure kung legit yung shop. And di sila nagpapa cod. Talagang payment first. Accidentally napanuod ko tong video na to. Naging confident ako sa magiging transaction ko bukas. Hahah salamat sir! Btw ang ganda ng drop ng mazda nyo sir 🔥🔥🔥Kumusta po h&r springs nyo after ilang months of use?
Ok pa rin naman, expect stiffer ride pero hindi naman to the point na sobrang bothersome. Pero pag cornering iba na ang feeling super planted and ang sarap idrive mas confident ka sa corners
Sir, would this void the warranty? What do you think of installing a supercharger to mazda 3 2.0?
I think it will void the warranty on suspension..as for the turbo installation, you can actually install it if you want
Sir levi, if ever u will do it in the future, maguupgrade ka sa higher spec headlights for (in my opinion), a better look?
Pwede sir
tein is another good alternative
Did you have to use spacers ? Also how are the H&R springs on rough roads!?
No i didnt use any spacers..It handles very well on rough roads , similar to the stock
There will come a point in time na sasayad at sasayad yan matagal na akong galing dyan ipinabalik ko uli sa dating original springs
Hi Sir. I observed your steering wheel cover. May I know where did you buy it? Thanks
Bought it from Manibela Ph, you can order online COD
Thank you for the information, Sir. 😊
Is you mazda3 a turbo model? I just ordered h&r springs and am worried that they weren’t made for the turbo
Its not a turbo model
good say sir, I currently have +35 offset mags, do you think lowering springs would give a good look?
Ano size ng mags mo? 18 or 19?
+35 has a poke to it so i think 225 width would look good when lowered
size 18 ako sir levi eh so medyo alangan ako
You have great taste when it comes to mods. Hopefully e upgrade nyo din po yung bumper, Mazda 3 2.5 Turbo bumper. More sporty and aggressive
Gumanda ang itsura sir levi but for me i’m not ready to pimp my ride by lowering the spring. Mas gusto ko ang stock to enjoy my driving style without inhibition or matatakot na baka sumayad. Kasi for me having to own a certain brand of car/s is already a privilege kaya i’m not after with the good looks anymore.
Yup it really depends on the person what his preferences are
Better!
How was the ride from stock to 19s to lowering spring thnx
Not bad
Nice content sir Levi. I noticed painted din calipers ng mazda3 nyo. Different shop po ata nagpaint nung sa monty nyo? Which shop po marecommend nyo between the 2? I am planning to get mine painted din po. Thank you
Mikstore po yata nasa vlog before ni Sir Levi
@@juliandolatre911 yup saw it. Yung sa monty po kasi ni sir Levi home service na from Popoy. So I wanted to get insights ano mas okay 😅
Sa Mikstore ko po pina paint yung sa Mazda.. actually you can do it DIY madali lang
Hi Bro. I have BP 2021 225x45x18. Can you share please part number for my car, lowerings springs. Hi From Azerbaijan!
How is it with 5 people inside the car? any rubbing
No rubbing at all even with 5 people on board
I also making choice between eibach and h&r, after watch your video, i likely choose h&r
Im on stock wheel and tire, 215/45 +45, do u think lower it down will look nice?
Yes, it will look good
@ridewithlevi6418 do u ever try to load 5 adults? Or any down side of h&r spring?
Yes I load 5 adults with full load at the compartment area, no issues at all as the springs are stiffer than stock
@ridewithlevi6418 one more concern is right now with stock spring already scraped my front lip... do u scrape more after lowered?
Lol that’s the beauty fixing car cosmetic or performance
What brakes do u have for the build.
Its stock
Sir Levi, what's your take on lowering springs vs coilovers para ma adjust yung ride height ng sasakyan?
Depende kasi on what you need. Yung coilovers kasi you can adjust the height while yung loweing springs ay naka fixed. mas expensive though ang coilovers but it is a better option because of its flexibility
Watched this video couple of times a long time ago. Went back because I just want to ask a question (can’t remember if it was discussed and too lazy to watch the whole thing again). Have you tried bottoming out your stock springs during heavy load? If yes, how does it compare with the lowering springs sir? Mas madali po ba mag bottom out yung stock? Yan kasi issue ko sa stock springs ng mazda 3 ko pag long travel punoan. Sana mapansin po.
Yes mas madali mag bottom out yung stock. Itong H&R spring mas stiffer
@@ridewithlevi6418 wow sobrang laking tulong ng feedback nyo sir. Issue ko kasi pag malayuan byahe namin sobrang kargado mazda3 ko. Mag bottom out sya sa rear minsan. Kaya curious ako sa lowering spring kung pwede parin sya kargahan ng mabigat.
gusto ko ung itsura nung before mtaas pwet tumaas din po ba ground clearance pag ginawang 19 mags or dahil sa gulong din? .. pero naintidihan ko na bakit ni lllowered nag sshine ung mags nung after super pansinin na sa ganda
Yes tataas ground clearance pag 19s pero nakadepende rin sa tire spec mo
sir Levi, ask ko lang po nung naka stock tires kapa na 16 inch, ilang fingers ung pagitan between tires and fenders sa harap? thanks po
Sa harap mga 3 fingers
@@ridewithlevi6418 same lang din po ba ang gap ng fender sa stock wheels sa bagong wheels po bago ka nagpalit ng springs?
@@charlesa1234 magkaiba po
Sir anu po title ng background music sa vlog ninyo? Relaxing po kasi.
Sunday Bossa po yung music
Sir Levi sa tingin nyo po anong year possible maglabas ng bagong mazda 3 generation?
Mukhang matatagalan pa kasi yung design nya ay nanalonsa world car design so I think they will keep it for a long time
Sana ung anak ko Rin sir mahilig sa kotse
Simulan habang bata pa para may ka kwentuhan ka palagi and its enjoyable
what more kung naka lowering springs + yung speed kit. sayad siguro palagi?
Not always, ingat lang sa pag drive
kamusta po boss pag 3 or 4 ung total na pasahero?. di nman sumayad?
Na test ko na na may 3 sakay sa likod, wala namang sayad
ung tanabe na lowering spring ko may 2 finger gap pa allowance
I want to do the opposite. Gusto ko taasan yung Mazda 3 ko, any tips po sir? usually kase umaakyat kame ng Rizal/Bulacan area and hindi talaga ganon kaganda yung roads don, lage ako sumasayad and na dadamage yung side skirt area ko. Any tips would be appreciated, thanks!
Magpapalit ka ng springs and shocks to have it lifted
pa wrap mo ng gloss black ung roof ng car sir ganda yun
Pag ginawang black yung roof, mawawala sir yung concept ng clean look, it will become rugged and you will change the mags to complement the look
Sir Levi papano pag nka sitting capacity ka of 5 person di ba sasayad pg sa humps?
Hindi sir kasi hindi naman sya masyadong lowered kasi naka 19s sya tapos naka 40 series tires ako. Kung 16 or 18 pang ang mags mo mas mababa yun
extended spoiler nlng tlaga!
Sir question, yung 1 finger gap ba, sumasayad pgka apat kayong nakasakay?
Hindi sir
Grabe ang lowered na ng mazda 3 tapos pinalowered niyo pa, good luck talaga sa mga humps 🤣
I drive it normally, no issue sa mga humps
Sir ask ko lang if ano size ng tire at mags nyo? Ang angas kase ng fit sir ❤️
19s+38 offset, 235/40/R19 tires
nakaka motivate maglower ng mazda 3 sir after ko mapanuod vid.
Tanong ko lang po if may sayad po ba after maglowered?
Wala sir
sri nagcut ba sila ng bump stop nun naglowering springs po kayo? thanks!
@@Tagapagtanggol hindi sir
thank you sir sa pag reply
Sir Levi. Anu specs ng tires and mags mo?
Yung mags ay VLF 11 size 19x8.5, tires is federal 225/40R19
BBK and exhaust nalang kulang sir 🤞🏻
No budget pa sir
Coilover kit dapat
kawawa yung shock absorber
& suspension mech
mo nyan Sir Lev..
Top of the line at bagong-bago, sayang..
Yung Lowering springs
advisable lang yan sa mga low budget
na sasakyan.
I think its a myth, kung tama ang spring rate it will also last for a long time but will see.. thanks for the inputs
Idol nde na need camber kit nyan kahit nag lowered?
Hindi na sir for this set up
sir, hindi po ba eto makaka void ng warranty ng sasakyan?
Not sure po but if you do this youvshould be ready on warranty issues
Di kayo nagcut ng bumpstop sa harapan?
Hindi sir
Sir levi, paano pag sa mga ramps pataas or pababa? kamusta naman po, thanks
Ok naman, kailangan lang dahan dahan ka pag baba
Kumusta po ride after installation?
Ok naman sir, maganda sya
why not coilovers?
I don’t need the adjustability of coilovers and won’t use it for track or any spirited driving, also the price is over the budget
Hindi ba sasayad yan pag 4 na kayong sakay?
Hindi sir, nasubukn ko na plus 15 kg load sa trunk
pano pag madaming pasahero sa likod sir levi di ba sumasabit?
Hindi naman sir, nasubukan ko na ng 3 sakay sa likod
@@ridewithlevi6418 mas lalong gumanda. rear wing na ata isusunod na i rerequest nyan sir papuntang ganito na --ruclips.net/video/LofS-1I5RGc/видео.html 😀
Sir meron kaya sila for montero?
Im not sure sir but you can ask them
ano na drl lights niyo sir
Yun pa ring white na binili ko kay Mikstore
First sir Levi 🥇
Thank you
Sir ask ko lang ng name ng shop? Tia
Just msg H&R philippines for inquiries
mas ok sana kung black ung mags mo sir IMO
Dati sir naka black mags yan
sir levi, tanong ko lang kamusta maintenance ng paint? about to pick up mazda 3 in pearl white. balita ko soul red and machine grey hirap alagaan kasi manipis yung paint
Lahat naman sila pare pareho lang manipis ang paint. its because of the need to come out with a nice paint that looks like moving when under the light
love your car sir, i want a mazda for daily use, im using right now aa ford everest, wanna try mazda
Yup try it, I use my Mazda as daily use and I love it