CHEVY EXPRESS NO CRANK NO START DIAGNOSIS & FIX
HTML-код
- Опубликовано: 24 июл 2024
- In today's video we take a look at a 2007 Chevrolet Express Van or truck with a 4.8l V8 engine. The customer complaint is that it is a no crank no start. They believe it may be a bad starter motor but they wanted us to make sure before we replaced it. Follow along as we go step by step through the diagnostic and troubleshooting procedures to find and fix this problem.
!!!Please don't forget to "LIKE" the video & "SUBSCRIBE" to the channel!!!
**********************************************************************
LAUNCH X431 PRO MINI
*Buy on AMAZON amzn.to/3kqhS51
*Or buy here kingbolentool.com/?ref=Oq43Sz...
*If you have any questions about the product or need tech support ask here! / kingbolen.fans
**********************************************************************
LISLE MASTER RELAY TEST JUMPER KIT
*Buy here amzn.to/3mfKhvo
***********************************************************************
POWER PROBE 3
*Buy here amzn.to/3e6noro
***********************************************************************
*Purchasing products through these affiliate links helps to support the channel.
Thank you for your contribution!
************************************************************************
*If this video helped you in any way and you would like to donate. Please
Click the link to Donate! paypal.me/advancedlevelauto
Thank you so much for your support!
***********************************************************************
Visit our Amazon store here www.amazon.com/shop/advancedl...
to shop for our channels recommended tools and gadgets!
************************************************************************
*You can email your questions and concerns to advancedlevelauto@gmail.com
Disclaimer:
Due to factors beyond the control of Advanced Level Auto, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Auto recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Auto, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Auto. 
Авто/Мото
Basic electricity, I already knew the whole thing but stayed and watched the entire video because of the way you explain things which is like watching Netflix
Man, it’s not only about your great knowledge and talent it’s also about how good communicator you are. Thanks for sharing this with us.
…and video production and youtube publication 👍👍
You're a natural born teacher dude, keep it coming, and I never even cared much for most of my teachers, lol.
The most concise and best video on this subject - complete with schematic diagram and test procedure including a full explanation of how the system works. Absolutely the best.
Have you considered being a teacher? Excellent job explaining the starter circuit!
Maybe sometime in the future. Thanks for watching!
The homie is a teacher already, I've learnt alot from him, over here in Nigeria, west Africa.
@pinacho1979@gmail.com pinacho 01aa1a
@@damiadedapo5363 happy to see a Nigerian
what a nice teacher u r every step explaing at grose root level thanks alot keep it up.
Thank you very much. You just same me a towing & fixing fee. You explanation is really good, sharp & precise. Thank you again to make these kinds of video. You are a great help to the community. Mine is a 2003 Chevy Express 2500. Exact same as yours.
Love the video's, someone that actually can troubleshoot and doesn't just load up the parts cannon. Keep up the good work!
Your not Boring so i keep on watching your channel
Dude, very clear and straight to the point. good job.
Like how direct and simple you explain stuff makes it much easier to understand
Great job explaining the circuit. You would be a great instructor. Thanks for sharing your knowledge.
Your videos are very detailed and well thought out in diagnosing electrical problems.. I have my work cut out for me with a mini cooper.thank you so much for your time making great videos
Keep up the good work my friend, you are a great tech, teacher and very accurate on your diagnosis. Thanks and may God Bless you and your business.
I am absolutely impressed with your knowledge! Please keep up the great work! I like the way you cover the diagrams and explain them in detail. I like the way you go over the relays in detail! I never get tired of you teaching...even if you have covered the same info before I get excited every time I see you post a video! Don't change a thing Bro!
Eric thanks for running us thru the starter wiring schematic. Even if I know how it is wired it never hurts to keep going over it. Eric my guess is it’s a company vehicle that relay cover will still be missing when you get it again. Thanks for sharing stay safe and well Artie 😊
excellent video and thank you. Love the step by step diagnosis. Not just throwing parts at it. Good job.
Fantastic video, very helpful in determining why my Chevy Express van will not start. Thanks!
Excellent explanation. I see a future teacher here. Great job explaining wiring diagrams . God bless.
That was a great vid!! Always enjoy your use of the wiring diagrams. That power probe is sweet!
Great Video. Thanks for the lesson- Plain and simple!
AWESOME info and the way u showed how the circuit tied together and as always enjoyable to watch Mr. ERIC got the job done. cheeeeeeeeeers
Great explanation of the starter circuit. But for the DIY, wouldn't you recommend starting checking the voltages at starter terminals first. Probable cause says it would be the starter motor or it's connecting wires. Then if it checks out, follow it back to the relay in the fuse box.
Sometimes I feel you over simplify things but realize it’s all for the acknowledgment of proper diagnosis. I’ve been burned throughout my career by skipping steps as well. Good job as always. Now onto the next job.
Great information that was presented very clearly and fully!
THANK YOU!
You making me feel like I'm a real mechanic 😁 Great video
Great on-site info and production. My starter relay was almost as corroded as that. I wire brushed it and things are better. Hopefully i don’t have to replace the starter motor just yet. Thank you.
good job! my 2019 chevy express 2500 is not trying to start so this helps me to focus on the right troubleshooting method. Luckily I'm at home but it's raining and the battery is only 1 year old.
EXCELLENT PRESENTATION MYAN YOU EXPLAIN REALLY GOOD AND ALWAYS ON THE POINT UNLIKE SOME OTHERS WHO WASTE 1/2 HOUR OF TALKING AND THEN TELL YOU ITS THE STARTER WHICH HE COULD NOT HIMSELF FOUND UT THE MECHANIC TOLD HIM. THANKS AGAIN MUCH APPRECIATED
Excellent diagnosis thanks for sharing your knowledge
Excellent job maestro thank you for sharing your knowledge God blesses you
Great diagnostics! You are an instructor!
Just got my relay tester today. Yeah. Launch comes Sunday excited
You'll love the Launch!
Great work Eric. Love your teaching videos
Just had this happen, 2008 Chevy Express 3500 6.0 engine. Everything checked out just fine. Decided to very carefully warm the starter and solenoid up with indirect heat from a small torch because it was 5 below last night and viola! It then started right up...
I apologize for sending a message during your life thing but I don't do live I am really looking forward to seeing that car collection from two months ago hopefully you still are planning to put that out just was letting you know I'm eagerly anticipating it and I hope you are feeling better and everything is back to normal for you cheers
That felt good when it started up!! Nice video bro !!!
BAM! WHAM! take that with all the details needed to understand this particular starting circuit(s).
Though he does not mention the BCM is also in the game, if the power reaches the relay, it means the BCM is talking to the ECM... so, all good... and obviously the issue is on the ECM side.
Within a few seconds into this video, watching this individual for the first time ever, I could feel this is done as needs to be done to help anyone who may not have any information about the circuits.
I am going to look for a video of his that treats the BCM side.
Thank you, thank you, thank you. Liked and Subscribed.
note: this particular setup may not go thru the ECM via BCM...
One note: it would be more thorough to mention the Voltage on each circuit. i.e. is it a 12V, 5V reference, low Reference !?
Love the way you explain it all. You should be teaching at mechanics school. You would be great at it.
This is a great video, thanks! I have a similar problem. Thought I was having a starter issue, and I went under to check voltage to the small wire and I didn't see any. I applied voltage to the small wire with the power probe, and I got nothing. I accidentally hit the small and large terminal at the same time and bang it turned over. I guess my point is you can test the starter that way too. The van I am working on has an aftermarket remote start and alarm system which I think may be causing the problem, not really looking forward to that. Next step, check relay and neural safety I guess. This happened out of the blue last week. I can start the van if I go under with a screwdriver and jump the terminals
Awesome explanation- keep up the amazing work! Thanks for the video.
Great walk through on testing the circuit and nice kicks 👍
excellent info, excellent delivery, excellent explaination . Thanks you are a good tech !!!!
Don't worry about the negative comments, you're doing a great job keep up the good work and thanks for all the info 👍✌️
excellent as always !!!! Thank you for sharing !
Hi from dubai. Like always best information videos. Thanks alot
As others have already said, you're born teacher. That's something you can not learn, either you have that in you or don't. There are real professionals out there but not everyoune has talent for teaching. Paul danner is certainlly one of the best. I don't know if you have his knowledge and experience, but in my opinion you're good in teaching as he is.
I live in Europe in Serbia. Although we have mainly diesels, as Paul have said, theese principles applies to them also.
Thank you! That means a lot coming from someone who watches Paul Danner. He is an inspiration to me. Thanks for watching!
Automotive wiring diagrams are my weak point. Thank for explaining the diagram thoroughly. So I gather that the dashed line means that not all of the components that are actually within the dashed line are being shown? Thanks for your awesome vids, sir!!!
Wow love to see your videos, thank you Eric!!!
Those four pin relays have the control side pins and the load side pins diagonal from each other so it will still work if you plug the relay in backward. Useless trivia lol
Man I need to be over there working with you brother!
Hermano clase magistral! Gracias!
Great work as always. Great video.
Another great vid, thanks Eric. 👍
Gracias solucionaste mi problema 😊
Thanks for going over the wiring diagram for newbs. I have advanced education, speak several languages, and electrical has been so hard, humbling for me, so frustrating....for years. But this video really made it clear. Thankyou!
Great video. Thank you.
Made it easy! Good video
Nicely done.
Really nice job...thanks.
Very informative video.
The Power probe is one of my favorite tools🔥
Me too!
Me three
Good job on the explanation
2nd time watching, good learning on repeat 👍👍, Thanks Man very good teacher 👍
Excellent Explanation!!!
Good vid man. Thanks.
This is good classes, thank you👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👋👌✌
I am a mobile mechanic! I recommend that people get a matco relay tester. Saves time
Very good educational video
Excellent, thank you
You can also do the jump test at the relay??
Great video as always.
Thank you to Share videos
Another awesome video 👍💯
Fantastic video man!
Grasias por la clase
good job as always.
Thank you
I had a very similar issue on one of these vans a few years ago, it was actually owned by an electrician and when I opened the hood there was household electrical wiring and wire nuts everywhere and the thing wouldn't crank intermittently!
I had a feeling it was a bad ground so I took my test light and hooked one end to the battery negative and touched the engine block with the other end and had him try and crank it and when it lit up it completely blew his mind!!
He couldn't wrap his mind around how the test light lit up when both ends of it were hooked up to something negative!!
He said they had put like four starter motors in it and three batteries and he had done all sorts of questionable wiring!
The crazy stuff we come across in this field never ceases to surprise me.
Great job
Great video
smooth as silk
Impressive work thanks. New sub here
I've watched this video a couple times over trying to figure out MY issue. Van starts with the key in the ON position, before I can even get to the crank position & keeps the starter engaged while running. Once it starts I have to pull the starter relay out to get the starter to disengage. Any help with this would be GREATLY APPRECIATED
Man I wish you was in my area 😪..having a similar problem right now
Thanks for a great video. More importantly, how do I find a guy like you near where I live? I could really use a good local mechanic 🙂
You are amazing 🤙🏻
I change the starter im my Chevy express but it’s doing the same thing. Probably it’s the ignition switch. I replace the batter and the starter and sometimes it works and sometimes I have to to try a few times to finally have the van running
Should be a teacher. Good fix.
My truck it’s doing the same exact thing but I replace the stares and battery and nothing still not working. I have outozone tested the new starter and it was good so at this point I don’t know what else it could be
I have a similar issue 2020 6.0 C4500 chevy I need the diagrams RV sat to long battery replaced
I know this video is older but I have a strange conundrum with a family members Van. It is a 2006 Chevy express 1500 4.3 V6. Some mornings you can crank it and it starts fine and runs great. Shut it off immediately and it will crank but it skips and jumps and will not start. Eventually it will disengage the starter and you will hear the Bendix. Very strange. New battery. 🤔 When it skips and jumps there is a noticable stain on the engine. Any thoughts?
This guy is good
Super video 👍
So I replaced the starter on mines and checked for power on the fuse box. And it still won’t crank.Any advise?
Nice!
Thank you for watching!
At least you got power, my van has no power at all so no crank no start because nothing is powering up, where do you start on this?
where are you located? i need to bring my van to you! i got an electrical problem, the left and right blinkers are blinking super fast but all bulbs are working fine...also its an intermittent problem, they will blink fast for a few months then theyll work normally for a month or 2 then go back to blinking super fast for a few months and so on. no one can figure it out, i was gonna bring it to the dealership but i dont trust them
great video. just curious if this car has a diagnostic port ? does it tell if the starter is ok ?
Hey how you doing my name is Ralph I recently became an owner of a 2014 Chevy spark base model. That was involved in a accident which was just basically cosmetics replace the bumper replace the headlights replace the hood about the change the front fenders. I have power in the car no crank I have checked the fuses I've even got a new ignition switch try dad still same issue so I put the other one back in. Any idea I could really use some help here please thank you
Maybe add a link to print out that wiring schematic.
hey i need help i was driving my 1999 chevy express 3500 motor 5.7 i was driving and then it died now theres no spark i replace the crank shaft and theres still no spark on the wires i replace the ignition coil and no spark i was told that maybe the timingbelt but i know this motors have chain timming