FIRST START - VW 2165cc Engine Build, Will it Run? AA Type 1 High Performance kit, air-cooled racing
HTML-код
- Опубликовано: 13 июн 2020
- Take a tour around Darrin's place and check out the first start on this 2165cc beast! CT hangs out and helps film this awesome machine come to life! #willitrun #firststart #vw #aircooled #race
FIRST START - VW 2165cc Engine Build, Will it Run? AA Type 1 High Performance kit, air-cooled racing, VWD, CT, ctmoog - Авто/Мото
BAD ASS NOVA !
A will it run on VW Darrin.... of course its gonna run...lol ohhhhhhhhh love the Nova, nothing like the sound of a V8 in the morning.
JW Classic VW thanks for the confidence
The AA 2165 sounds excellent! A report down the road on reliability would be interesting,
Man, the nova sounds amazing!
78x94 is 2165cc
74x94 is 2054cc 👍
Sounds great! Wish I could get my hands on a sidewinder exhaust, I had to go back to a stinger lol
Good catch! Thanks man!
vwdarrin thank you for always sharing your knowledge.... everyone of us appreciate it!
That Nova is SICK! And CT is hanging out with the right crowd...😉👍
Ricardo Baerga thank you
Nothing like seeing a person in their element 👍
WaveAction777 in a vw zone
sounds great, fire and all
Mustie1 thanks
Love to see you put this in your Karmann Ghia and then do burnouts without the use of snow. . .just sayin!
easiest way I found to pre-set the dual linkage is on the stops at wide open throttle. the minute amount of slop is usually enough for idle to be set with equal flow.
had a synchrometer, tried using it, then shoved it in the corner and tuned by ear/feel. much better outcome, although I did use it again to check idle, just off idle part throttle to make sure it wasn't lead/lagging one side.
other thing is having the linkage arm ends so the link rods are both parallel/veritcal, so they move at the same exact rate. made that mistake in a hurry before
The big block Nova is barking! This was the fanciest VW D video I have ever seen edited. 👍 Good to see you posting!
Ozzstar's Cars the credit for the edit goes to CT
Good to see you've been creative in your garage. You've encouraged me to recon my supercharged vw block. BTW love that crisp v8 nova that would be a handful to drive.
Ratted bug glad I could help
Always a no-doubter! Loved seeing the Nova.
Greg's Garage thanks. A no doubter lol
That engine sounds great!
Great work there darrin! runs smooth! plenty of power there!
Outstanding camera work, ready for discovery channel!
Need to hear that 2110 come to life
steve pimentel I’ll work on that
Glad to see you keep the videos coming
Corey Powell will do
Really sweet motor. Looks like you guys are having a great time there, I'm envious. I hope one day can have myself a little garage to tinker with my vw.
looks like your getting busy my dude, that's whats up!!
Sounds good Darrin and the Nova sounds great!!
ceedell thanks man
Great to see your back out in the shop. Also nice to see the Nova being driven.
1970chevelle396 how ya been
@@vwdarrin I'm doing good. In the end of August I go back to India to have the rest of the dental work done. And It looks like in the end of November I will be going to Saudi Arabia to the Global Auto Salon car show.
Great vid guys!
Thanks for the knowledge
Of course it’s gonna run. What a nice engine.
The last one sounds terrific. That Nova with the 'stock' cam sounds pretty good as well :)
that motor has a dance floor. RIPPIN.
Mike Fn Garage thank you
Got it running great!
Love it man👍👍🍺
Good god, open a window guys 😂 love your channel so much!!! 👍👍👍
She sounds good!!!
Sounds GOOD
True legend!!!!!!!!!
steve pimentel thank you
Beautiful!
Great looking toys including your RV
Nice work!
Terry Prevatt thanks
Looking good
Lee Melroy thank you
Nice one 👍👍🇬🇧
Vw Rosstorations thank you
0:58 That's pure music! What a glorious engine sound that SS makes.
What about 17:25?
@@lucidhurricane What happens at 17:25 ?
Sweet inventory of VW parts
Love your videos
Learn a lot from them
Thank u
Looking for a1 3/4 header
Do u have one?
Luv to have that engine n my baja!!!!!!!!
Watchin 👍👍
Nice work gentle men you guys probably know this old trick but when i was a young guy and doing a lot of wrenching on my Aircooled VW s myself and all my buddy’s were always looking for abandoned Shopping carts if you cut the majority of the cart off the bottom with the wheels it was a perfect storage vessel for moving the motor around the garage and even installing and removing them for a Beetle with the correct floor jack we used to build our workbenches with enough clearance for the motor to get stored underneath and out of the way fyi we never had to steal a cart as you could always find one in the city areas one time we even found one on the shoulder of a main highway in Miami Florida ? Go figure ?
Someone has been busy with a spray gun....looking Good
Greg Van thank you
👍 very nice.
David Garcia thank you
You really knows darrin!!!😉
Please make the CT 914 type 4 a super road runner
I don’t know what that red car is but man it sounds fantastic!
Michael Faulkner Chevy nova
vwdarrin ahh thanks for replying mate. Love your videos, they helped me rebuild my 1600 to 1776 last winter. Thanks from NZ
Beautifull very ,very nice.
That Nova is bad ass!
Its a runner !!
Yes it is
Thumbs up!
Bucks WoodShop thank you
Nova sounds good
JC Quick thanks
78x94 is 2165 74x94 is 2054 those webers came from weber .com they are machined in china
sounds good you set that light just right huh brother
Damn you guys went to Sonnys. BBQ... Man I am jealous love that place.
HAHA! Yes, it's pretty good! =)
always helps when the wires are on backwards. ha ha. It happens.
Mike Fn Garage yes it does
I've never done that before! (/end of lie) :)))
Waves hiyas Darrin
This video has me worried about the red ignition wire laying one the #4 J tube= last week I put a new battery in Rambus and the nylon oil pressure tube touched the #3 header pipe and 50 lbs. of oil pressure dumped 1 quart of oil out before I saw smoke??
Great sounding engine, hate to see you working on the floor
Thanks Tom! Not for long! =)
I would have to school my apprentices on this and other best working practices. 30+ years working off a floor = bad knees and back.
Shocking he's running it w/o oil !!!..
Nice motor man. Is it going into a bus? I hope you ran it in to break-in the cam.
question... what size wheels are on that nova in the rear. I have a set of welds for mine but not sure what size tire to wrapped them with that will fit with out hitting the tube or out quarter panel
Did you put the other dist. back on?
The bug engine sounds great. 👍
Vintage 76 vipergreen # Romeo thank you
Parabéns,queria um desses no meu fusca,infelizmente no Brasil o país que vendeu mas fusca no Mundo,não temos as peças que vcs tem aí no USA.👏👏👏👍
did I see phenolic carb. spacers/heat breaks?
this was cam was in the motor prior to the rebuild ,
Love the sound of that engine! Where’s your shop located at? Would like to take my I give for a update , se what you can make with it.
Victor Hernandez it’s at our home. You can email my wife
Andreab@thegourmetchocolatier.com
Maybe a 2176 🤔
You do great work. Nice motors, wish I could collaborate with you on my 65 bug. However, your disorganization is confusing.
Maybe you boys want to check you have the pistons in the right way round........😂
Tha Masta!
👍👍👍
Thanks man!
@@vwdarrin motor sounds good
He sir I live west of orlando and was wondering if you have any vw engines for sale.
No cam break in run Darin?
Sounds great but still not as good as that nova. lol
scottsinfl Andrea agrees
how much for the engine with the shinny little distributor??
one like in the video is approx $5500 depending on the carbs you use. you can go up or down from there depending on what kind of engine you are looking for. you can email andrea at andreab@thegourmetchocolatier.com
Simple static timing must be unknown….
hola uena tarde amigo una pregunta tu motor 2165cc hasta cuando minimo motor porfavor garcias saludo
What´s the name of the tool used on minute 14:20?
FO 1432
the rims on the nova.. what are they?
looks like weld super lites
sounds to me it has low compression on one of the cylinders when starting
No oil pressure gauge
Is that a universal damper/balancer on the crank pulley?
By the amount of exhaust he has inhaled by now he must be at least high...
The motion camera is terrible, I was almost getting motion sickness! Get rid of the wannabe filmmaker and rehire the tripod! I do like your videos normally!
do these guys know what they are doing, , I wouldn't let them anywhere near my engine,
😂keine Hektik und +Kabel der Zündspule richtig anschliessen. das erspart euch viel Arbeit
Smokin smells like perfume...
Hey darrin got a motor you wanna sell
Do you have an email address? I have a few questions, I’m building an engine for 72 Ghia
Brother ... finished fixing the car engine and then sold it to me,
I attached it to the dirt bike,
How much to sell it?
Bro ... are you still in school?
Did the teacher praise you for doing well?
Do you love the teacher?
Have you kissed the teacher yet?
God will be jealous of you.
fund ,móvil, benefit ,date ,bank ,deposit 2 .atm ATM,