Thank you so much for this video! You saved me $35 by buying the part myself on ebay, and another $75 from the labor at my local printer repair shop. Very easy to follow along with the video. Greatly appreciate your help!
Thanks a ton. Saved time and money. And hassle, really. I didn’t have to go through the maintenance stuff, it just worked. I appreciate that you shared this with us.
Thanx! Managed to follow this. I just had my spring on the fuser cover assembly get out of whack, but we figured it out. Ironic that such a small thing can become the pain :)
+Len Davidson Looks to be Brother LY6753001 OEM Fuser unit...ordered from Amazon...here's what they said on Amazon:"Brother Fuser Assembly This Fuser (Fixing) Unit is compatible with the following printer models: Brother HL-3140CW Brother HL-3170CDW Brother MFC-9130CW Brother MFC-9330CDW Brother MFC-9340CDW "...when I received it I installed it with no problems!
Easier if you remove the part with the green clips 1st, then the 2 black covers.. reverse to assemble. and the two plugs on the right come off easier with needle nosed pliers.. but pull at the top of the plugs, the front and side pcs. are guides and permanent.
Hi! Thanks for the video. I've just replaced my fuser, and it seemed to go pretty smoothly. But now my screen says "Remove Jammed Paper", ..... so I must have put something back together wrong, triggering a sensor. Any suggestions?
+Steve RX4 you can buy just the part needed to fix the problem from me here for $88.00 www.ebay.com.au/itm/141943595088?ssPageName=STRK:MESOX:IT&_trksid=p3984.m1559.l2649
Stuck at “PF Kit T1 ok?” screen. Pressing set goes back to reset-PF Kit T1 screen, and scrolling to number keys and pressing 99 while still in above menu doesn’t do anything. Please help!
Has anyone had this issue that after replacing the fuser you get an error message "2 sided printing disabled check back cover'? I went through all the troubleshooting steps but the problem remains and I can't print duplex, everything else works as normal
@@jose2292 After I fix the error: "Cover is open. Close the top cover". And replace the toner cartridge. Then the machine has this error: ruclips.net/video/21QJLNAHf9I/видео.html
Thank you for posting this!! The brother website and instructions are HORRIBLE and you made it easy
Thank you so much for this video! You saved me $35 by buying the part myself on ebay, and another $75 from the labor at my local printer repair shop. Very easy to follow along with the video. Greatly appreciate your help!
Thanks for this video! Thanks to your guidance, I was able to replace the fuser all by myself.
Thanks a ton. Saved time and money. And hassle, really. I didn’t have to go through the maintenance stuff, it just worked. I appreciate that you shared this with us.
Thanx! Managed to follow this. I just had my spring on the fuser cover assembly get out of whack, but we figured it out. Ironic that such a small thing can become the pain :)
Thank you thank you thank you. I hope this buys me another 5 years plus with my printer.
Eric:
Thanks so much. Your instructions regarding the reset worked; the "official" instructions were ambiguous and did not work.
Brilliant guide, thanks for uploading this!
Thanks...ordered the fuser for my MFC 9330CDW...looks to be the same process...
+novarod what was the part number for the fuser roller unit for the 9330CDW? Thanks
Len
+Len Davidson Looks to be Brother LY6753001 OEM Fuser unit...ordered from Amazon...here's what they said on Amazon:"Brother Fuser Assembly This Fuser (Fixing) Unit is compatible with the following printer models: Brother HL-3140CW Brother HL-3170CDW Brother MFC-9130CW Brother MFC-9330CDW Brother MFC-9340CDW "...when I received it I installed it with no problems!
Thank you,
This was very helpful for me to replace the Fuser und es ist auch für nicht englisch sprechende hilfreich!
Thanks So much - This has helped many people :)
Easier if you remove the part with the green clips 1st, then the 2 black covers.. reverse to assemble. and the two plugs on the right come off easier with needle nosed pliers.. but pull at the top of the plugs, the front and side pcs. are guides and permanent.
Good video. But do you know where or how to replace the super capacitors in that model? Mine will not turn on.
This helped! Thank you so much!
Hi! Thanks for the video. I've just replaced my fuser, and it seemed to go pretty smoothly. But now my screen says "Remove Jammed Paper", ..... so I must have put something back together wrong, triggering a sensor. Any suggestions?
I made the replacement, I connected the printer, reset and the fuser error remains, what else can I do, thanks
In Australia, the complete printer is cheaper than just the fuser.
+Steve RX4 you can buy just the part needed to fix the problem from me here for $88.00
www.ebay.com.au/itm/141943595088?ssPageName=STRK:MESOX:IT&_trksid=p3984.m1559.l2649
+Terry Jones Yeah but they fall apart again unless you use expensive oem toner.
I replaced the Fuser - thank you - but it still tells me I need to replace it - how do I reset - Thank You
Did you follow the instruction in the text at the end of the video?
Stuck at “PF Kit T1 ok?” screen. Pressing set goes back to reset-PF Kit T1 screen, and scrolling to number keys and pressing 99 while still in above menu doesn’t do anything. Please help!
Same here.
Any luck?
pull the paper tray completely out of the machine and remove the jammed error no paper in side any one help me
Has anyone had this issue that after replacing the fuser you get an error message "2 sided printing disabled check back cover'? I went through all the troubleshooting steps but the problem remains and I can't print duplex, everything else works as normal
The 9130CW doesn't have a duplex function at all. For Brother's duplex printers, you need a "D" in the name, like 9330CDW.
Hello,
MFC-9330cdw 'cover is open. close the top cover...I know i have closed it but it still doesent work. What is the problem? Thanks.
I can't say I know for sure, but I would suspect it is a sensor that "reports" the cover closed or open. Possibly the sensor is broken or misaligned?
@@jose2292 Is it this one? www.precisionroller.com/boards-for-brother-mfc-9330cdw/details_83357.html . Thank you.
@@miapalo4540 I really don't know for sure. I would hate to mislead you one way or the other.
@@jose2292 After I fix the error: "Cover is open. Close the top cover". And replace the toner cartridge. Then the machine has this error: ruclips.net/video/21QJLNAHf9I/видео.html
Volume too low. Otherwise good. thanks.
Did you work on Twd?
Not sure I understand your question.