Thank you so much for taking the time to post this and the companion video for removal / replacement of the 8710DW fuser. You're videos made this easy. I cannot imagine trying this without your expert guidance. Thanks again.
Many thanks indeed for these 2 videos! I now have a working 8710 printer, after the black roller beneath the brown fuser roller had delaminated. Cheers from Sonoma County, CA!
Thank you. This was very helpful. The fuser I bought online did not come with any instructions and even if it had, they probably would not have been as helpful as this video. There's something to be said about actually watching someone do it, as opposed to reading about it in a manual.
Thank you very mich for your video. I replaced my fuser for the MFC-8950DW. When trying to print I get error "printing not possible DE" and paper stays stuck. Any idea?
Hi my friend, I have a brother dcp 8150 dn, and is continuosly jamming the paper, I can see the pressure roller with wrinkles all aroun the roller, Is that normal? The machine makes 2 or 3 copies and then goes stuck, and displays"internal jam" or "rear jam", I remove the paper and sometimes works good for ten copies or just one. Do you think it could be a problem with the pressure roller? Thanks for your support, and sorry for the ortography... Best regards from México
As long as the rollers are rubber based, you could try using fedron on the rollers and see if it makes the issue any better. It is a temporary fix but at least it will help you track it down better. Fedron is a rubber cleaner and conditioner.
OK, thanks, is "Fedron" some kind of lube or anti-slip compound? Here in Mexico sometimes is hard to get the supplies... Thanks for your time... Have a nice day...
Fedron is basically a citrus based cleaner and conditioner for rubber. Many people will use rubbing alcohol which will actually dry out the rubber and cause more harm than good. If you use Fedron with a lint free rag it will pull a lot of the toner and paper particles out of the rubber rollers and will soften the rubber which can give you some extra life on them. Here is an amazon link for Fedron, i just pulled it from a quick Google search. www.amazon.com/Fedron-Rejuvenator-Offset-Blanket-Duplicating-Processing/dp/B00PKOUEPC I normally get it from eBay, as prices are better.
Overkyll HTR Than you, I checked out the Fedron characteristics, I´m going to get a can and clean out the roller, thanks for your help, best regards from Mexico...
My MCF L2700DW won't turn on after a lightning struck my area. Can somebody give any ideas...I don't know how to open the panels to check a blown fuse or something. Please help ! Thanks in advance, Ramon Perera.
Thank you so much for taking the time to post this and the companion video for removal / replacement of the 8710DW fuser. You're videos made this easy. I cannot imagine trying this without your expert guidance. Thanks again.
Many thanks indeed for these 2 videos! I now have a working 8710 printer, after the black roller beneath the brown fuser roller had delaminated.
Cheers from Sonoma County, CA!
Thank you. This was very helpful. The fuser I bought online did not come with any instructions and even if it had, they probably would not have been as helpful as this video. There's something to be said about actually watching someone do it, as opposed to reading about it in a manual.
Thanks for the video. It helped me to replace the fuser unit on my MFC-8950DW, which solved the problem of blurry print and paper jams.
Thanks for taking the time to post this video. I was able to replace my fuser with no problem! :)
Very helpful. $150 fixed our office printer vs. buying an all new one.
That spring is super important to ground the riser!
What is the function of the fuser spring on the right side that you have removed?
outstanding video. Thank you for your excellent work
Why did you have to change it? What was the problem?
Thank you for the instruction video// Martin
Great video, thanks for posting!
Thank you very mich for your video.
I replaced my fuser for the MFC-8950DW.
When trying to print I get error "printing not possible DE" and paper stays stuck.
Any idea?
Hello. At what number of pages did you replace the fuser? What problems were you experiencing? Thank you.
Have video on replacing the (LV0787001) Eject Sensor?
hi, where the grease goes? inside the film sleve or on the fuser tube?, how much grease, should i cover all with grease or just a small line? thanks.
Where do you normally buy the spare parts? I'm looking for the OEM version and not the original one.
WHAT? Do you know that OEM means Original Equipment Manufacture as in ORIGINAL??
What were the symptoms that caused you to do a fuser replacement?
The paper kept jamming going through the fuser.
@@PARedneckfun what do you suggest if you keep getting the error print unable EC
Hi my friend, I have a brother dcp 8150 dn, and is continuosly jamming the paper, I can see the pressure roller with wrinkles all aroun the roller, Is that normal? The machine makes 2 or 3 copies and then goes stuck, and displays"internal jam" or "rear jam", I remove the paper and sometimes works good for ten copies or just one. Do you think it could be a problem with the pressure roller? Thanks for your support, and sorry for the ortography... Best regards from México
As long as the rollers are rubber based, you could try using fedron on the rollers and see if it makes the issue any better. It is a temporary fix but at least it will help you track it down better. Fedron is a rubber cleaner and conditioner.
OK, thanks, is "Fedron" some kind of lube or anti-slip compound? Here in Mexico sometimes is hard to get the supplies... Thanks for your time... Have a nice day...
Fedron is basically a citrus based cleaner and conditioner for rubber. Many people will use rubbing alcohol which will actually dry out the rubber and cause more harm than good.
If you use Fedron with a lint free rag it will pull a lot of the toner and paper particles out of the rubber rollers and will soften the rubber which can give you some extra life on them.
Here is an amazon link for Fedron, i just pulled it from a quick Google search.
www.amazon.com/Fedron-Rejuvenator-Offset-Blanket-Duplicating-Processing/dp/B00PKOUEPC
I normally get it from eBay, as prices are better.
Overkyll HTR
Than you, I checked out the Fedron characteristics, I´m going to get a can and clean out the roller, thanks for your help, best regards from Mexico...
My MCF L2700DW won't turn on after a lightning struck my area. Can somebody give any ideas...I don't know how to open the panels to check a blown fuse or something. Please help ! Thanks in advance,
Ramon Perera.
Having a issue getting the white clip back in groove anyone else experience that issue?
Is it me or is the sound super low?
not just you
Sorry could barely hear your audio.
Po