From the last 2 months I was able to understand most of the things from the scratch. Updated my modchip, installed it, handled all things on Hekate, etc., Thank you so much for your guides.
for many months I've been watching your guides but just now I got my switch modded and can make use of all of the information you've made available. Many thanks.
@@sthetixofficial Issue ended up being related to some files being corrupted. Wiped everything clean and then redownloaded everything with a download manager and it all worked fine
Great guide, but I have a question regarding a banned v1 Switch. What steps would be unnecessary if the system is already banned? Is there any point in setting up the emuMMC partition at that point?
Dude you are nailing every video. I am new to jailbreak scene and your video are my go-to video guides. Anyway do you have a video or link about a guide on how to transfer save file from ofw/sysnand to emunand?
When i try to lanch EMUMMC it says failed to match warmboot with fuses ! If you continue, sleep won’t work ! And I get the same message also when booting SYSMMC ( stock )
Hey recent purchase just got my switch in today switch looks great and going to be leaving a review very soon. I just am noticing 1 thing I can't find prod.keys in the switch folder
@@sthetixofficial My apologies I figured that out shortly after making the comment. Didn't realize I missed a step switch has been great. Just trying to get the applet version of tinfoil working. Don't have a cart so following your tutorial now 😁
@@sthetixofficial Hey I'm really struggling to get a nsp file installed through DBI game updates work but base games give a "cannot write to placeholder error" any idea what I'm doing wrong here? Would really appreciate the help
I am very grateful for everything you do. I have a question. is it possible to use 2 SD cards, for example on one you have the provisions of the game, on the other others and just change them like that? Greetings
I would like to to the same too. I’m assuming just insert the 2nd sd card. When the no payload screen shows up just press vol - and vol + simultaneously to boot into OFW.
Why do you set up emunand with 12 gb when I’ve seen other’s do it with more? I’m kindd new to this and I just bought my picofly. I’m just trying to figure out what to do. Thanks.
Does the SD Card have to be Fat32 before doing this tutorial? I think mine was exFat but it kinds shows Fat32 now. Does Hekate do this automatically? Thanks
My switch wont boot to hekate. I was updating my HATS but forgot to delete the three folders (bootloader, atmosphere, config). I had already pasted/replaced all the files on the SD card before deleting those folders. Now, I am encountering this error: “Missing LP0 (sleep) lib!” “Update bootloader folder!” Kindly help. please
@@sthetixofficial i’ve replaced the sd card reader with a new one but still wont work. I also observed that it wont boot to original firmware by clicking the volume up and down at the same time on the bee screen. It shows blue screen after clicking the volume buttons.
@sthetixofficial Awesome video, very easy to follow, just wanted to ask, Do I need to keep the backup dumped files on the sd in the switch after copying them to my pc, or can I delete them to save up some memory as 60gb is alot to keep on there If it doesn't need to be on there. Thanks in advance
Sir, if i reformat my sd card, i need to follow this again from start and even the partion process? i want to recreate my emmunand cause get me some error. Thank you
@@sthetixofficial sir, how about the transferring or moving the dumped files to a computer? what is purpose of that backup? its that important? can i dont follow that step because im saving space for my HDD and you have a video about how to use that backup sir? Thank you so much
Setting up like this has NOGC enabled in HEKATE by default. Do you have any videos or information on NOGC? Cartridges won’t run with it enabled and I can’t really find much about whether I can safely disable it or not.
Thank you for another great video! I have a question, I have an OLED chip I bought about 6 months ago but haven't go around to installing it in to my Switch yet, what is the best/most recent method & firmware to update the chip to before the install? My Switch OLED is on the latest OFW as I've been using it to play store bought games. Thank you for any advice.
@@sthetixofficial thanks for the reply, yeah fully aware how hard it is, I've done a few already 😊 That's not what I meant though, what I'm talking about is upgrading the modchip firmware before Installation as my chip is at least 6 months old just wondering what the best, most stable firmware version is for the chip and if the upgrade method has changed over time etc?
Hi can someone here please help me. When I try to open it in OFW its not working. My switch is completely off like no power the only way to turn it on is to reset the chip. Any fix to that?
He can't say anything else or The Business can take down the video for copyright infringement. In reality they want to censor this content and use copyright as a scapegoat.
Just did this on my V1 following all the steps and worked flawless! I will upgrade the sd card in the future, I just need to copy/paste everything to the new card, right?
Hi, ive followed everything with your latest HATS pack 1.71-5 through tele. I've successfully boot to Emummc once and got error message on sysmmc. Now i couldn't boot to both sysmmc or emummc.
Hi, I have a v1 switch, I follow every step, but I got a problem, at the stage of restart into OFW I got 3 buttons, OFW(gray)-RCM-Cancel, I can't press the OFW button. I have your latest HATS and my console is at 17.0.1 firmware. What should I do?
Hey! I recently purchased a mod chip to modify my switch OLED. Is there anything I need to do to the actual mod chip? I saw a video that said you have to flash the mod chip if no software is installed. But other videos I have seen don't mention anything about this so I am a little confused. Thank you
Fuse on the switch is not like a house fuse. It protects the console from being downgraded to a lower firmware. And the fuse count should match the firmware version. You can read the table here switchbrew.org/wiki/Fuses
ive been trying to set up my modded lite with this method, but there was no combo release on the HATS github page- on emuNAND launch, i just get an error that says 'unknown pkg1 version' like twice. i'm doing it from a fresh microsd and using the exact same method as in the video
I received a "failed to launch HOS! Message. Unknown package version. HOS version not supported!Or emuMMC corrupt! Anyone know how to fix this? I'm so frustrated as this is my third attempt arriving at this outcome. Any help is appreciated ❤️
it's been yrs since i messed with this. I'm using the rmcloader to get onto my friend's switch, but when I use the loader it goes straight to the main switch screen (I know it works base on seeing the files in album) instead of the screen that has Launch, More Configs, Payload, emuMMC (hekate screen?). With the new files did it auto make a CFW? How can i get to the Hekate screen? Need to get there to make his emuMMC.
you better remove the atmosphere, bootloader, config folder, and extract my pack, sthetix.info/hats-releases you can set the autoboot later inside hekate later.
Hi, i'm currently trying to migrate my old Switch with SXOS still installed on it, is it possible to use this guide to migrate ? Also im using the older unpatched Switch V1 that still request payload to boot the CFW. TIA
thanks for the detailed tutorial, but I have question about emunand's internal storage. Is the 12GB raw partition makes 9.3GB usable space for internal storage? I am worried if I its because i have installed games in sysnand. thanks in advance!
what if we have a freshly chipped V1 switch? is there a guide on how to prepare that type of console? or are the steps here identical in that process? :)
Hi i did everything following the guide and downloaded latest HATS pack for 19.0.1, on first launch into emuMMC it worked but after putting switch to sleep, next day it only shows black screen. I can boot into hekate but trying to launch anything after, even OFW only leads to black screen.
I created a nand backup after this started happening, if worse comes to worse and i have to do fresh install would that be all good even if i did the backup after the black screen started occurring?
@ i attempted that and it still black screens, when i try to run it from the fusee payload it just stays stuck on atmosphere logo, would this be a hardware issue which is odd cause it worked before and then next day just stopped. if anything i might try and take this to a repair shop
@sthetixofficial I think nobody asked this question that I'm gonna ask (I'm a noob on this, please bear with me). I have a switch lite and I soldered the cpu part flex cable on the board BUT I didn't connect it yet on the chip of hwfly. Now, I tried turning on the switch (just testing it if it will boot ON) then it turns on fine. Then I proceeded soldering the upper part left side of flex cable (the ABC gnd points), and after soldering I turned it in again then it boots ON. Lastly I soldered the upper right flex cable (the one that has + symbol) then for the last time I tried turning it on but it doesn't able to boot up anymore. After trying to turn on multiple times, I saw once a purple screen (not sure if purple or violet but It's light purple). Is my switch lite DEAD already? (I didn't connected the main chip hwfly on the flex cables yet)
Doing this on a switch v1, with a new microsd card. Do i need to format it to fat32 first before copying the hats files? Also what payload to i inject to get into the hakate menu, the hekate ctaer one?
@@sthetixofficial thanks, already finished the setup yesterday, it went very smoothly, thanks for the hats package. don't even know why i was so nervous, the entire process was very easy :D
Yes correct. Unless you want to add a Semi-Stock option under the launch menu. You can download u.pcloud.link/publink/show?code=XZezT00Zf80pWAGh49VzwJncVQqbRJCPx6ok and extract it to your SD card.
@sthetixofficial I did what you instructed in the video but when I inserted the SD card with emummc partition, each time the desktop asked me the following, you need to format the disk in drive e: before you can use it. do you want to format it" Please help
Bang, saya sblmnya pake sx os, fw sysnand masih di 11.0.0, switch v.1 unpatched, pake rcm loader Rencana mau pake sd card baru pindah ke atmos, brrti tinggal ikutin cara di video ini aja ya? Krna saya pake rcm loader brrti ganti ke lampu warna biru ya sblm inject? Payload di dalam rcm loadernya perlu diupdate terbaru atau tinggal pake aja? Plis dijawab ya bang sthetix... 🙏
Hello, congratulations for the video, I have a doubt: 1) in CFW I can enable wifi without being banned because the serial is obscured anyway. What would happen if I clicked on the shop by mistake (would it give me an error)? 2) In Sysmmc I can connect to wifi without getting banned without of course using tininfoil and game backups. 3) in OFW being the stock system I can do what I want having the serial number in sight so I can play with the cartridges and go online without risking a ban. Everything is correct? Obviously using your pack and following the tutorial exactly
creating the emummc is more or less the same as creating the backup of the console's nand . although it is cropped, but you got the prodinfo which is the soul of the console.
I have this exact setup on my 200GB card, how do I transfer this to my new 1TB SD Card? I have tried copying all contents to new card and nothing, also have tried using disc/image cloning software and nothing. Says payload.bin file is not found.
Hey there sthetix and thank you for the awesome video tutorials. I have a Switch OLED with CFW on a 128gb micro sd and I want to throw away that micro sd and intall from scratch with a 512gb card. Is it ok to just remove the old sd card and follow this videos tutorial for the fresh install on my 512 card or should I do something else too?
I get stuck on the switch logo when I launch the emuMMC. Any ideas how to fix this? I started from scratch with all of these files as I was having issues before this when I was using SXcuter method.
update: My switch gets stuck on switch logo after launching any payloads with TegraRCM. I rebuilt the sd card and also tried a 2nd sd card. I can launch Hekate and mess with the settings but when I launch emuMMC = switch logo freeze. After trying to launch atmosphere, I see the atmosphere logo but then switch logo freezes... Any ideas?
@@sthetixofficial pardon my lack of knowledge here.... How do I check the nand to see if there's something wrong there? I will also look up the level 1+2 unbrick guide. Thanks for your help. I appreciate you. 🙏🤙
Sorry if this is a silly question, but there are 2 CFW and then a OFW. I understand the OFW because people might want to go on the eShop and purchase games, play online, re-download purchased games, etc. What is the point of having 2 CWF alongside it? I want to make sure I understand everything. Thanks!
two CFW : one CFW is for Sysmmc (OFW with patches) and another one is emuMMC you need to learn bro. github.com/sthetix/HATS#what-is-sysmmc--emummc--stock
I followed the link in the description to the Hats page, but it looks completely different and I'm unable to find the download link shown in the video.
From the last 2 months I was able to understand most of the things from the scratch. Updated my modchip, installed it, handled all things on Hekate, etc., Thank you so much for your guides.
you are welcome
@@sthetixofficial I just modded my switch my has the butterfly looking logo with no sd says do I follow the same guide
yes you can follow the same guide
@@sthetixofficial got it already man thanks so much what app u recommend to download free news games best hb app
@@sthetixofficialwould you ever make a updated guide or does this still work?
for many months I've been watching your guides but just now I got my switch modded and can make use of all of the information you've made available. Many thanks.
you are welcome
Thank you for the many guides and resources.
Glad you like them! and thank you for your support .
This video made it super simple for me to setup with 0 experience! Thanks so much!
You are welcome.
I love this guy cuz he can help when we got problems on consoles ❤️
Is amazing how we can use the OFW and CFW in the same console.
Amazing video. Just received your OLED modded console and managed to follow these steps easily :)
An absolute legend. Thank you so much for this!
i have searched far and wide for your channel bro i was searching for strix or sthix hehe.
such a wonderful guide, no slow talking and very clear
Glad it helped!
Thank you for this amazing guide and for the hats pack. I've used this multiple times already.
Brother I hardly if ever comment on RUclips videos. But your video helped me in many ways.
Glad it helped
Thank you so much for this wonderful guide. It has everything included that one needs to complete the setup.
Glad it helped
*Man, ur guides are lifesavers & supa' precise! ! !~* kudos to U good sir :) btw, where are you from?
I am in Indonesia :)
Amazing guide!!! Worked for me flawlessly even in 2024.
Also, after the backup, can we delete it from the SD card?
u can
Thanks!
Welcome!
thank you. i was getting frustrated trying to make sure every version of everything matched
Quality guide 👏
Thanks bro.
10 -10 rating
with the serial number blocker you mentioned at 5:28, is that a foolproof way of preventing a console ban?
exosphere.ini will protect your console from accidental ban, but in the end you should have awareness
thank you so much this video still works switch is fully set up now. so can i just start using gold leaf no problem now
I love how both the title and thumbnail has no Nintendo Switch on it.
Thanks bro 👊 had a nightmare before finding the right video!
Glad I could help
Excellent video! Appreciated.
Glad it was helpful!
Followed the guide did everything step by step and when I try to launch emummc I just get a black screen. Any help?
for anyone intrested first update ofm to 17.0.1 then solder chip in my case picofly then hats pack and ure done works for me
help, when I launch EmuMMC it said Error while loading Fss0 atmosphere/package3 wrong ini cfg or missing/corrupt files failed to launch HOS
delete the atmosphere / bootloader / config from your sd card and extract my pack.
Just boots to a black screen when i run emuMMC. Followed the steps exactly on a fresh install.
I’m getting the same issue.. did you find the solution?
try redoing the guide.. is your sysmmc working?
@@sthetixofficial Issue ended up being related to some files being corrupted. Wiped everything clean and then redownloaded everything with a download manager and it all worked fine
I have a modded OLED switch. I just want to learn how to modd my new SD card for it. Where exactly in the video explains how to do this?
Great guide, but I have a question regarding a banned v1 Switch. What steps would be unnecessary if the system is already banned? Is there any point in setting up the emuMMC partition at that point?
setting up the emummc is pointless if your console is banned.
I have created the emuMMC but when I boot in OFW, It always says I need to format it. Do I need to remove the SD card always after booting into OFW?
check your SD card format, is it either fat32 or exfat?
Just got my switch modded. Thank you for this very easy guide 👍
No problem 👍
Would love to get a hacked switch OLED
Dude you are nailing every video. I am new to jailbreak scene and your video are my go-to video guides. Anyway do you have a video or link about a guide on how to transfer save file from ofw/sysnand to emunand?
Hi, yes you can watch my jksv video.
Thanks for this video, I installed a modchip yesterday and was lost, almost messed up with another video that wasnt showing how to setup emummc.
When i try to lanch EMUMMC it says failed to match warmboot with fuses ! If you continue, sleep won’t work ! And I get the same message also when booting SYSMMC ( stock )
You need to ignore the message by pressing the power button and update your console later using Daybreak.
Does the micro sd card need formatted first in fat32? If so any software recommendations for this? Thanks
Hey recent purchase just got my switch in today switch looks great and going to be leaving a review very soon. I just am noticing 1 thing I can't find prod.keys in the switch folder
you need to get the prod.keys with the lockpickrcm payload
@@sthetixofficial My apologies I figured that out shortly after making the comment. Didn't realize I missed a step switch has been great. Just trying to get the applet version of tinfoil working. Don't have a cart so following your tutorial now 😁
@@sthetixofficial Hey I'm really struggling to get a nsp file installed through DBI game updates work but base games give a "cannot write to placeholder error" any idea what I'm doing wrong here? Would really appreciate the help
usually you need to update the console firmware
I am very grateful for everything you do. I have a question. is it possible to use 2 SD cards, for example on one you have the provisions of the game, on the other others and just change them like that? Greetings
I would like to to the same too. I’m assuming just insert the 2nd sd card. When the no payload screen shows up just press vol - and vol + simultaneously to boot into OFW.
did u get the answer?
Why do you set up emunand with 12 gb when I’ve seen other’s do it with more? I’m kindd new to this and I just bought my picofly. I’m just trying to figure out what to do. Thanks.
because others always follow but dont know the essentials, please read this x.com/sthetixofficial/status/1703197594279923972?s=20
@@sthetixofficialawesome. Thanks
Guide terbaik untuk beginner
Does the SD Card have to be Fat32 before doing this tutorial? I think mine was exFat but it kinds shows Fat32 now. Does Hekate do this automatically?
Thanks
No, it automatically converts the sd card to fat32 after you setup the emummc
My switch wont boot to hekate.
I was updating my HATS but forgot to delete the three folders (bootloader, atmosphere, config). I had already pasted/replaced all the files on the SD card before deleting those folders. Now, I am encountering this error:
“Missing LP0 (sleep) lib!”
“Update bootloader folder!”
Kindly help. please
re extract the new pack please.
@@sthetixofficial already tried that but it won’t work
it could be the sdcard connector is damaged
@@sthetixofficial i’ve replaced the sd card reader with a new one but still wont work.
I also observed that it wont boot to original firmware by clicking the volume up and down at the same time on the bee screen. It shows blue screen after clicking the volume buttons.
It is not the SD card slot bro, but the SD card connector to the motherboard.
Please, could you put the last version of atmosphere and hekate in the hatpack for people who update their system.
t.me/HATSPACK
@sthetixofficial
Awesome video, very easy to follow, just wanted to ask,
Do I need to keep the backup dumped files on the sd in the switch after copying them to my pc,
or can I delete them to save up some memory as 60gb is alot to keep on there If it doesn't need to be on there.
Thanks in advance
You can move it to your PC.
Sir, if i reformat my sd card, i need to follow this again from start and even the partion process? i want to recreate my emmunand cause get me some error. Thank you
yes of course, you need to recreate everything if you format the sd card.
@@sthetixofficial sir, how about the transferring or moving the dumped files to a computer? what is purpose of that backup? its that important? can i dont follow that step because im saving space for my HDD and you have a video about how to use that backup sir? Thank you so much
Setting up like this has NOGC enabled in HEKATE by default. Do you have any videos or information on NOGC? Cartridges won’t run with it enabled and I can’t really find much about whether I can safely disable it or not.
NOGC = no game card.
i dont have any video for that, but you need to ask Hekate on github
well. if nintendo sees your Joy-Con serial number. they know the main unit serial number aswell probaly. but i dont think that matters
Very useful and only real youtuber
just to make sure, the micro SD card have to be formated in fat32?
no. you can use exfat or fat32.
Thank you for another great video! I have a question, I have an OLED chip I bought about 6 months ago but haven't go around to installing it in to my Switch yet, what is the best/most recent method & firmware to update the chip to before the install? My Switch OLED is on the latest OFW as I've been using it to play store bought games. Thank you for any advice.
It is hard to install it. You can watch how I installed it on my website or on odysee.com/@sthetixofficial:9
@@sthetixofficial thanks for the reply, yeah fully aware how hard it is, I've done a few already 😊 That's not what I meant though, what I'm talking about is upgrading the modchip firmware before Installation as my chip is at least 6 months old just wondering what the best, most stable firmware version is for the chip and if the upgrade method has changed over time etc?
you can disassemble the console, get the USB cable and install the latest hwfly-nx bootloader and firmware to the chip.
Hi can someone here please help me. When I try to open it in OFW its not working. My switch is completely off like no power the only way to turn it on is to reset the chip. Any fix to that?
Please update the console using daybreak to the latest version after getting to the sysmmc CFW
"the console"
He can't say anything else or The Business can take down the video for copyright infringement. In reality they want to censor this content and use copyright as a scapegoat.
@@nickwaters2802 i did get it lol.
➡️ Nintendo Switch mod ⬅️
Just did this on my V1 following all the steps and worked flawless! I will upgrade the sd card in the future, I just need to copy/paste everything to the new card, right?
yes correct.
After copying the backup to my computer, can i just delete the backup from my sd card?
update for this?
@JoshuaValdez-m3m Yes u can
@@shaheerwaqar1577 even the prod key sir?
What happens when you do a 3DS system transfer like ‘Modded 3DS ➡️ None-Modded 3ds’. Can you make a video seeing what happen?
Thanks for the guide, can you please explain why it needs 12GB when creating emulation mmc partition?
x.com/sthetixofficial/status/1703197594279923972?s=20
Hi, ive followed everything with your latest HATS pack 1.71-5 through tele. I've successfully boot to Emummc once and got error message on sysmmc. Now i couldn't boot to both sysmmc or emummc.
what did u do?
@@sthetixofficial i’ve followed your tutorial, got error code 2168-0001 when launching emummc or sysmmc
For anyone having this problem, Ive fixed it by deleting file “420000000007E51A” in atmosphere/contents in the sd card.
you need to do the fix archive bit instead of deleting the file. or use the updated hats pack.
Hi, I have a v1 switch, I follow every step, but I got a problem, at the stage of restart into OFW I got 3 buttons, OFW(gray)-RCM-Cancel, I can't press the OFW button. I have your latest HATS and my console is at 17.0.1 firmware. What should I do?
You need to disable the AutoRCM to enable the OFW function.
Hey! I recently purchased a mod chip to modify my switch OLED. Is there anything I need to do to the actual mod chip? I saw a video that said you have to flash the mod chip if no software is installed. But other videos I have seen don't mention anything about this so I am a little confused. Thank you
Can you give a reference or explain the fuse count? And is it any bad effect if it being bypassed?
Fuse on the switch is not like a house fuse. It protects the console from being downgraded to a lower firmware. And the fuse count should match the firmware version. You can read the table here switchbrew.org/wiki/Fuses
ive been trying to set up my modded lite with this method, but there was no combo release on the HATS github page- on emuNAND launch, i just get an error that says 'unknown pkg1 version' like twice.
i'm doing it from a fresh microsd and using the exact same method as in the video
you need to re extract the package.
@@sthetixofficial re-extract it? i've done that but it hasn't changed anything :(
(the guide is great btw, just having trouble with something weird)
do you have a fix ? im stuck here also@@biteybeast
I received a "failed to launch HOS! Message. Unknown package version. HOS version not supported!Or emuMMC corrupt!
Anyone know how to fix this? I'm so frustrated as this is my third attempt arriving at this outcome. Any help is appreciated ❤️
Re extract my pack.
is this still usefull for 17.0.1 fw? also i read something about sd data being better than partition, what do you think?
it does. and sd partition is better
it's been yrs since i messed with this. I'm using the rmcloader to get onto my friend's switch, but when I use the loader it goes straight to the main switch screen (I know it works base on seeing the files in album) instead of the screen that has Launch, More Configs, Payload, emuMMC (hekate screen?). With the new files did it auto make a CFW? How can i get to the Hekate screen? Need to get there to make his emuMMC.
you better remove the atmosphere, bootloader, config folder, and extract my pack, sthetix.info/hats-releases
you can set the autoboot later inside hekate later.
Hi, i'm currently trying to migrate my old Switch with SXOS still installed on it, is it possible to use this guide to migrate ? Also im using the older unpatched Switch V1 that still request payload to boot the CFW.
TIA
You can.
thanks for the detailed tutorial, but I have question about emunand's internal storage. Is the 12GB raw partition makes 9.3GB usable space for internal storage? I am worried if I its because i have installed games in sysnand. thanks in advance!
We usually install games on the sdcard, not to the emunand's nand section
what if we have a freshly chipped V1 switch? is there a guide on how to prepare that type of console? or are the steps here identical in that process? :)
it is identical.
@@sthetixofficial thank you!!!!!! 🫡
😂 i literally stumbled onto this video cuz the thumbnail said "console" and i wanted to know what console
Remember to set your EmuMMC partition size to 29GB as of Firmware 18.0.1
How?
@@YodaddylolornahIn the Partition Manager, instead of moving the Red Slider (emuMMC) to 12 GiB, move it to 29 GiB. 3:40
@@grahamcracker-incwhy so? Is there any issue with partition size? On OLED do we need to do 64GB?
Can you please tell me how you removed the stock launch icon?
Thankyou
should not bro, you can't live without it
Hi i did everything following the guide and downloaded latest HATS pack for 19.0.1, on first launch into emuMMC it worked but after putting switch to sleep, next day it only shows black screen. I can boot into hekate but trying to launch anything after, even OFW only leads to black screen.
I created a nand backup after this started happening, if worse comes to worse and i have to do fresh install would that be all good even if i did the backup after the black screen started occurring?
try to replace the SD card.
@ i attempted that and it still black screens, when i try to run it from the fusee payload it just stays stuck on atmosphere logo, would this be a hardware issue which is odd cause it worked before and then next day just stopped. if anything i might try and take this to a repair shop
Hey do you have a Video that explain how to set up the switch when you want to sale it ?
do we delete the prod.key file from the sd card after moving? or can we keep it there
you can keep it there.
Which bin file do i use with this hats package to lanch into rcm mode with tegra? i have a v1 switch and i use a jig and a tegra to
inject the payload
Use the Hekate Payload.
@sthetixofficial I think nobody asked this question that I'm gonna ask (I'm a noob on this, please bear with me). I have a switch lite and I soldered the cpu part flex cable on the board BUT I didn't connect it yet on the chip of hwfly. Now, I tried turning on the switch (just testing it if it will boot ON) then it turns on fine. Then I proceeded soldering the upper part left side of flex cable (the ABC gnd points), and after soldering I turned it in again then it boots ON. Lastly I soldered the upper right flex cable (the one that has + symbol) then for the last time I tried turning it on but it doesn't able to boot up anymore. After trying to turn on multiple times, I saw once a purple screen (not sure if purple or violet but It's light purple). Is my switch lite DEAD already? (I didn't connected the main chip hwfly on the flex cables yet)
I thought for emunand to full partion? Or is 12 GB enough ? I have 512 gb sd card that‘s why i‘am asking
you can read my article x.com/sthetixofficial/status/1703197594279923972?s=20
Why when I press reboot to reboot OFW, it is drak gray the OFW button, not possible to press, it only appear to be possible to rebook RCM and Cancel.
it only affecting the V1 with AutoRCM turned on. just disable the AutoRCM and you will be able to select the OFW option.
@@sthetixofficial thank you! It works!
How to setup android and emmummc partition at the same time?
Thanks, man. Does your HATS pack enable incognito, or do I have to set that up?
it does via the exosphere.ini
@@sthetixofficialawesome. Thanks!
When I go to the homebrew channel on my Wii and press BootMii, I get a black screen. Do you know why?
because you dont have the bootmii files, try reinstalling it using the modmii installer
@@sthetixofficial thanks
Can I use my existing Switch Lite modded SD card (which is already setup) on my new OLED modded or do I need to setup everything from scratch?
no, you need to set it up again from scratch.
what sd card file format to use?
can i update ofw to latest fw and will athmospere be updated as well?
thank you for this video!
exfat or fat32 is fine.
yes you can update the fw to the latest version.
Doing this on a switch v1, with a new microsd card. Do i need to format it to fat32 first before copying the hats files? Also what payload to i inject to get into the hakate menu, the hekate ctaer one?
no need. hekate will automatically format the card as fat32 after you create the emummc
@@sthetixofficial thanks, already finished the setup yesterday, it went very smoothly, thanks for the hats package. don't even know why i was so nervous, the entire process was very easy :D
You are welcome
Do you need to block Nintendo servers or does the hats pack do that?
the pack automatically does that.
In order to play online games like fortnite should we be rebooting into OFW to do so?
Yes correct.
Unless you want to add a Semi-Stock option under the launch menu. You can download u.pcloud.link/publink/show?code=XZezT00Zf80pWAGh49VzwJncVQqbRJCPx6ok
and extract it to your SD card.
do I just put it into the root folder of the sd card? Thank you!! @@sthetixofficial
yes
@sthetixofficial I did what you instructed in the video but when I inserted the SD card with emummc partition, each time the desktop asked me the following, you need to format the disk in drive e: before you can use it. do you want to format it" Please help
just disable the autostart option inside windows. It wont prompt that message again.
Bang, saya sblmnya pake sx os, fw sysnand masih di 11.0.0, switch v.1 unpatched, pake rcm loader
Rencana mau pake sd card baru pindah ke atmos, brrti tinggal ikutin cara di video ini aja ya?
Krna saya pake rcm loader brrti ganti ke lampu warna biru ya sblm inject? Payload di dalam rcm loadernya perlu diupdate terbaru atau tinggal pake aja?
Plis dijawab ya bang sthetix... 🙏
Pake yg merah di rcmloader juga bisa asal pake hats github.com/sthetix/HATS
Hello, congratulations for the video, I have a doubt:
1) in CFW I can enable wifi without being banned because the serial is obscured anyway. What would happen if I clicked on the shop by mistake (would it give me an error)?
2) In Sysmmc I can connect to wifi without getting banned without of course using tininfoil and game backups.
3) in OFW being the stock system I can do what I want having the serial number in sight so I can play with the cartridges and go online without risking a ban.
Everything is correct? Obviously using your pack and following the tutorial exactly
you better read this :github.com/sthetix/HATS#how-to-use-the-pack-wisely-and-not-get-banned
This link doesnt work anymore and I do t have X. Is there another way to read how not to get banned?
I thought you’re supposed to do the backup first before anything else?
creating the emummc is more or less the same as creating the backup of the console's nand . although it is cropped, but you got the prodinfo which is the soul of the console.
I have this exact setup on my 200GB card, how do I transfer this to my new 1TB SD Card? I have tried copying all contents to new card and nothing, also have tried using disc/image cloning software and nothing. Says payload.bin file is not found.
You can try cloning the disk with a partition manager, like the minitool or aomei partition manager
When choosing to reboot to ofw the OFW button is greyed out and I can't boot it. It is softmodded and the ofw was version 16 not 17
You need to remove the AutoRCM and after that the OFW option will be selectable.
@@sthetixofficial Worked perfectly, thank you!!
I got "failed to mount SD card", what does that mean?
Thanks a lot
maybe your SD card is damaged.
Help! I selected SD File instead of SD Partition, what do I do to get that straightened out??
just reinstall the emummc.
Hey there sthetix and thank you for the awesome video tutorials. I have a Switch OLED with CFW on a 128gb micro sd and I want to throw away that micro sd and intall from scratch with a 512gb card. Is it ok to just remove the old sd card and follow this videos tutorial for the fresh install on my 512 card or should I do something else too?
You can .just follow the guide.
@@sthetixofficial thank you for the answer. Keep up the good work
I get stuck on the switch logo when I launch the emuMMC. Any ideas how to fix this? I started from scratch with all of these files as I was having issues before this when I was using SXcuter method.
update: My switch gets stuck on switch logo after launching any payloads with TegraRCM. I rebuilt the sd card and also tried a 2nd sd card. I can launch Hekate and mess with the settings but when I launch emuMMC = switch logo freeze. After trying to launch atmosphere, I see the atmosphere logo but then switch logo freezes... Any ideas?
is your ofw working?
@@sthetixofficial nope. Same switch logo freeze
try to check ur nand partitions inside hekate. or try doing the level1 or the level2 unbrick guide
@@sthetixofficial pardon my lack of knowledge here.... How do I check the nand to see if there's something wrong there? I will also look up the level 1+2 unbrick guide. Thanks for your help. I appreciate you. 🙏🤙
I was wondering how to boot OFW after installing a mod chip, thanks for this video
it is here : ruclips.net/video/up_sjzKHFeU/видео.html
Thanks. Worked for me
Sorry if this is a silly question, but there are 2 CFW and then a OFW. I understand the OFW because people might want to go on the eShop and purchase games, play online, re-download purchased games, etc.
What is the point of having 2 CWF alongside it? I want to make sure I understand everything.
Thanks!
two CFW :
one CFW is for Sysmmc (OFW with patches)
and another one is emuMMC
you need to learn bro.
github.com/sthetix/HATS#what-is-sysmmc--emummc--stock
BIS keys validation failed when creating emuMMC via sd partition help please.
creating emummc doesnt need the keys
I followed the link in the description to the Hats page, but it looks completely different and I'm unable to find the download link shown in the video.
hello it is on codeberg.org/sthetix/HATS/releases
@@sthetixofficial thank you!!!